staging: rtl8192e: Remove unused constants starting with MAX_RX_QUEUE

Remove unused constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/0809e3380ce76354d689edd80b82adada5a18d4e.1698295861.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192e/rtl8192e/r8190P_def.h

@@ -11,8 +11,6 @@
 
 #define		MAX_SILENT_RESET_RX_SLOT_NUM	10
 
-#define RX_MPDU_QUEUE				0
-
 enum rtl819x_loopback {
 	RTL819X_NO_LOOPBACK = 0,
 	RTL819X_MAC_LOOPBACK = 1,

drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h

@@ -248,75 +248,15 @@
 #define bPAEnd				0xf
 #define bTREnd				0x0f000000
 #define bRFEnd				0x000f0000
-/* T2R */
-#define bCCAMask			0x000000f0
-#define bR2RCCAMask			0x00000f00
-#define bHSSI_R2TDelay			0xf8000000
-#define bHSSI_T2RDelay			0xf80000
 /* Channel gain at continue TX. */
-#define bContTxHSSI			0x400
-#define bIGFromCCK			0x200
-#define bAGCAddress			0x3f
-#define bRxHPTx				0x7000
-#define bRxHPT2R			0x38000
-#define bRxHPCCKIni			0xc0000
-#define bAGCTxCode			0xc00000
-#define bAGCRxCode			0x300000
 #define b3WireDataLength		0x800
 #define b3WireAddressLength		0x400
-#define b3WireRFPowerDown		0x1
-/*#define bHWSISelect			0x8 */
-#define b2GPAPEPolarity			0x80000000
-#define bRFSW_TxDefaultAnt		0x3
-#define bRFSW_TxOptionAnt		0x30
-#define bRFSW_RxDefaultAnt		0x300
-#define bRFSW_RxOptionAnt		0x3000
-#define bRFSI_3WireData			0x1
-#define bRFSI_3WireClock		0x2
-#define bRFSI_3WireLoad			0x4
-#define bRFSI_3WireRW			0x8
 /* 3-wire total control */
-#define bRFSI_3Wire			0xf
 #define bRFSI_RFENV			0x10
-#define bRFSI_TRSW			0x20
-#define bRFSI_TRSWB			0x40
-#define bRFSI_ANTSW			0x100
-#define bRFSI_ANTSWB			0x200
-#define bRFSI_PAPE			0x400
-#define bBandSelect			0x1
-#define bHTSIG2_GI			0x80
-#define bHTSIG2_Smoothing		0x01
-#define bHTSIG2_Sounding		0x02
-#define bHTSIG2_Aggreaton		0x08
-#define bHTSIG2_STBC			0x30
-#define bHTSIG2_AdvCoding		0x40
-#define bHTSIG2_NumOfHTLTF		0x300
-#define bHTSIG2_CRC8			0x3fc
-#define bHTSIG1_MCS			0x7f
-#define bHTSIG1_BandWidth		0x80
-#define bHTSIG1_HTLength		0xffff
-#define bLSIG_Rate			0xf
-#define bLSIG_Reserved			0x10
-#define bLSIG_Length			0x1fffe
-#define bLSIG_Parity			0x20
-#define bCCKRxPhase			0x4
 #define bLSSIReadAddress		0x3f000000 /* LSSI "read" address */
 #define bLSSIReadEdge			0x80000000 /* LSSI "read" edge signal */
 #define bLSSIReadBackData		0xfff
-#define bLSSIReadOKFlag			0x1000
-#define bCCKSampleRate			0x8 /* 0: 44 MHz, 1: 88MHz */
-
-#define bRegulator0Standby		0x1
-#define bRegulatorPLLStandby		0x2
-#define bRegulator1Standby		0x4
-#define bPLLPowerUp			0x8
-#define bDPLLPowerUp			0x10
-#define bDA10PowerUp			0x20
-#define bAD7PowerUp			0x200
-#define bDA6PowerUp			0x2000
-#define bXtalPowerUp			0x4000
-#define b40MDClkPowerUP			0x8000
-#define bDA6DebugMode			0x20000
+
 #define bDA6Swing			0x380000
 #define bADClkPhase			0x4000000
 #define b80MClkDelay			0x18000000

drivers/staging/rtl8192e/rtl8192e/rtl_core.h

@@ -91,8 +91,6 @@
 
 #define MAX_TX_QUEUE				9
 
-#define MAX_RX_QUEUE				1
-
 #define MAX_RX_COUNT				64
 #define MAX_TX_QUEUE_COUNT			9
 

drivers/staging/rtl8192e/rtl819x_Qos.h

@@ -21,7 +21,6 @@ struct octet_string {
 #define AC1_BK	1
 #define AC2_VI	2
 #define AC3_VO	3
-#define AC_MAX	4
 
 enum direction_value {
 	DIR_UP			= 0,

drivers/staging/rtl8192e/rtl819x_TS.h

@@ -10,7 +10,6 @@
 #define TS_ADDBA_DELAY		60
 
 #define TOTAL_TS_NUM		16
-#define TCLAS_NUM		4
 
 enum tr_select {
 	TX_DIR = 0,

drivers/staging/rtl8192e/rtllib.h

@@ -911,7 +911,6 @@ enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
 	((up) < 6) ? WME_AC_VI : \
 	WME_AC_VO)
 
-#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
 #define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address
 					 * plus ether type
 					 */