Commit 6138dc2f authored by Jemma Denson's avatar Jemma Denson Committed by Mauro Carvalho Chehab

[media] cx24120: Move clock set to read_status

This patch removes the requirement of waiting for tune in
set_frontend by moving the clock set call into read_status
Signed-off-by: default avatarJemma Denson <jdenson@gmail.com>
Signed-off-by: default avatarPatrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent cd20c596
......@@ -138,6 +138,7 @@ struct cx24120_state {
u8 cold_init;
u8 mpeg_enabled;
u8 need_clock_set;
/* current and next tuning parameters */
struct cx24120_tuning dcur;
......@@ -613,6 +614,8 @@ static int cx24120_send_diseqc_msg(struct dvb_frontend *fe,
return -ETIMEDOUT;
}
static void cx24120_set_clock_ratios(struct dvb_frontend *fe);
/* Read current tuning status */
static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
......@@ -639,6 +642,20 @@ static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status)
* Other cx241xx drivers have this slightly
* different */
/* Set the clock once tuned in */
if (state->need_clock_set && *status & FE_HAS_LOCK) {
/* Set clock ratios */
cx24120_set_clock_ratios(fe);
/* Old driver would do a msleep(200) here */
/* Renable mpeg output */
if (!state->mpeg_enabled)
cx24120_msg_mpeg_output_global_config(state, 1);
state->need_clock_set = 0;
}
return 0;
}
......@@ -988,32 +1005,12 @@ static void cx24120_clone_params(struct dvb_frontend *fe)
state->dcur = state->dnxt;
}
/* Table of time to tune for different symrates */
static struct cx24120_symrate_delay {
fe_delivery_system_t delsys;
u32 symrate; /* Check for >= this symrate */
u32 delay; /* Timeout in ms */
} symrates_delay_table[] = {
{ SYS_DVBS, 10000000, 400 },
{ SYS_DVBS, 8000000, 2000 },
{ SYS_DVBS, 6000000, 5000 },
{ SYS_DVBS, 3000000, 10000 },
{ SYS_DVBS, 0, 15000 },
{ SYS_DVBS2, 10000000, 600 }, /* DVBS2 needs a little longer */
{ SYS_DVBS2, 8000000, 2000 }, /* (so these might need bumping too) */
{ SYS_DVBS2, 6000000, 5000 },
{ SYS_DVBS2, 3000000, 10000 },
{ SYS_DVBS2, 0, 15000 },
};
static int cx24120_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct cx24120_state *state = fe->demodulator_priv;
struct cx24120_cmd cmd;
int ret;
int delay_cnt, sd_idx = 0;
fe_status_t status;
switch (c->delivery_system) {
case SYS_DVBS2:
......@@ -1076,6 +1073,9 @@ static int cx24120_set_frontend(struct dvb_frontend *fe)
"%s: Inversion = %d (val = 0x%02x)\n", __func__,
state->dcur.inversion, state->dcur.inversion_val);
/* Flag that clock needs to be set after tune */
state->need_clock_set = 1;
/* Tune in */
cmd.id = CMD_TUNEREQUEST;
cmd.len = 15;
......@@ -1107,49 +1107,6 @@ static int cx24120_set_frontend(struct dvb_frontend *fe)
ret |= state->dcur.ratediv;
ret = cx24120_writereg(state, CX24120_REG_RATEDIV, ret);
/* Default time to tune */
delay_cnt = 500;
/* Establish time to tune from symrates_delay_table */
for (sd_idx = 0; sd_idx < ARRAY_SIZE(symrates_delay_table); sd_idx++) {
if (state->dcur.delsys != symrates_delay_table[sd_idx].delsys)
continue;
if (c->symbol_rate < symrates_delay_table[sd_idx].symrate)
continue;
/* found */
delay_cnt = symrates_delay_table[sd_idx].delay;
dev_dbg(&state->i2c->dev, "%s: Found symrate delay = %d\n",
__func__, delay_cnt);
break;
}
/* Wait for tuning */
while (delay_cnt >= 0) {
cx24120_read_status(fe, &status);
if (status & FE_HAS_LOCK)
goto tuned;
msleep(20);
delay_cnt -= 20;
}
/* Fail to tune */
dev_dbg(&state->i2c->dev, "%s: Tuning failed\n", __func__);
return -EINVAL;
tuned:
dev_dbg(&state->i2c->dev, "%s: Tuning successful\n", __func__);
/* Set clock ratios */
cx24120_set_clock_ratios(fe);
/* Old driver would do a msleep(200) here */
/* Renable mpeg output */
if (!state->mpeg_enabled)
cx24120_msg_mpeg_output_global_config(state, 1);
return 0;
}
......@@ -1419,11 +1376,13 @@ static int cx24120_get_frontend(struct dvb_frontend *fe)
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct cx24120_state *state = fe->demodulator_priv;
u8 freq1, freq2, freq3;
fe_status_t status;
dev_dbg(&state->i2c->dev, "%s()", __func__);
/* don't return empty data if we're not tuned in */
if (state->mpeg_enabled)
cx24120_read_status(fe, &status);
if ((status & FE_HAS_LOCK) == 0)
return 0;
/* Get frequency */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment