Commit 61528d88 authored by Marek Vasut's avatar Marek Vasut Committed by Brian Norris

mtd: nand: Rename nand_chip .dn to .flash_node

Use a more descriptive name for the device_node element in struct nand_chip .
This name matches the element name used for device_node property of a flash
in the spi-nor framework.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent 11bff0b7
......@@ -1792,7 +1792,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
memset(cfg, 0, sizeof(*cfg));
ret = of_property_read_u32(chip->dn, "brcm,nand-oob-sector-size",
ret = of_property_read_u32(chip->flash_node,
"brcm,nand-oob-sector-size",
&oob_sector);
if (ret) {
/* Use detected size */
......@@ -1899,7 +1900,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host)
mtd = &host->mtd;
chip = &host->chip;
chip->dn = dn;
chip->flash_node = dn;
chip->priv = host;
mtd->priv = chip;
mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "brcmnand.%d",
......
......@@ -3846,8 +3846,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *type;
int ret;
if (chip->dn) {
ret = nand_dt_init(mtd, chip, chip->dn);
if (chip->flash_node) {
ret = nand_dt_init(mtd, chip, chip->flash_node);
if (ret)
return ret;
}
......
......@@ -544,7 +544,7 @@ struct nand_buffers {
* flash device
* @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
* flash device.
* @dn: [BOARDSPECIFIC] device node describing this instance
* @flash_node: [BOARDSPECIFIC] device node describing this instance
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
* @write_byte: [REPLACEABLE] write a single byte to the chip on the
......@@ -647,7 +647,7 @@ struct nand_chip {
void __iomem *IO_ADDR_R;
void __iomem *IO_ADDR_W;
struct device_node *dn;
struct device_node *flash_node;
uint8_t (*read_byte)(struct mtd_info *mtd);
u16 (*read_word)(struct mtd_info *mtd);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment