Commit 62bc4d4a authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

regulator: Convert max8997 to set_voltage_time_sel

Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 9e96b3a7
......@@ -489,9 +489,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
int i;
u8 org;
int i, reg, shift, mask, ret;
switch (rid) {
case MAX8997_LDO1 ... MAX8997_LDO21:
......@@ -520,21 +518,50 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
if (ret)
return ret;
max8997_read_reg(i2c, reg, &org);
org = (org & mask) >> shift;
ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
*selector = i;
if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 ||
rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
/* If the voltage is increasing */
if (org < i)
udelay(DIV_ROUND_UP(desc->step * (i - org),
max8997->ramp_delay));
return ret;
}
static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
const struct voltage_map_desc *desc = reg_voltage_map[rid];
/* Delay is required only if the voltage is increasing */
if (old_selector >= new_selector)
return 0;
/* No need to delay if gpio_dvs_mode */
switch (rid) {
case MAX8997_BUCK1:
if (max8997->buck1_gpiodvs)
return 0;
break;
case MAX8997_BUCK2:
if (max8997->buck2_gpiodvs)
return 0;
break;
case MAX8997_BUCK5:
if (max8997->buck5_gpiodvs)
return 0;
break;
}
switch (rid) {
case MAX8997_BUCK1:
case MAX8997_BUCK2:
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
max8997->ramp_delay);
}
return ret;
return 0;
}
/*
......@@ -780,6 +807,7 @@ static struct regulator_ops max8997_ldo_ops = {
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_ldobuck,
.set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_enable = max8997_reg_enable_suspend,
.set_suspend_disable = max8997_reg_disable_suspend,
};
......@@ -791,6 +819,7 @@ static struct regulator_ops max8997_buck_ops = {
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_buck,
.set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_enable = max8997_reg_enable_suspend,
.set_suspend_disable = max8997_reg_disable_suspend,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment