Merge tag 'qcom-arm64-for-4.11' of...

Merge tag 'qcom-arm64-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.11

* Add Vol+ support for DB820C and APQ8016
* Add HDMI audio support for APQ8016
* Fix DB820C GPIO pinctrl name
* Enable WCNSS on MSM8916
* Add SCM node for MSM8996
* Use fixed XO clock on MSM8916

* tag 'qcom-arm64-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: db820c: add support to volume up key
  arm64: dts: apq8016-sbc: Limit MPP4 high state to 1.8V
  arm64: dts: apq8016-sbc: Add Volume Up key device node
  arm64: dts: apq8016-sbc: add support to hdmi audio via adv7533
  arm64: dts: db820c: fix gpio pinctrl name correctly
  ARM: dts: msm8916: Add and enable wcnss node
  arm64: dts: msm8996: Add SCM DT node
  arm64: dts: qcom: msm8916: Use fixed factor xo clock
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 &pm8916_gpios {
 
@@ -30,6 +31,18 @@ pinconf {
 
 &pm8916_mpps {
 
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916_mpp4 {
+		pinconf {
+			pins = "mpp4";
+			function = "digital";
+			output-low;
+			power-source = <PM8916_MPP_L5>;	// 1.8V
+		};
+	};
+
 	pm8916_mpps_leds: pm8916_mpps_leds {
 		pinconf {
 			pins = "mpp2", "mpp3";

arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi

@@ -72,4 +72,17 @@ pinconf {
 			bias-disable;
 		};
 	};
+
+	msm_key_volp_n_default: msm_key_volp_n_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107";
+		};
+		pinconf {
+			pins = "gpio107";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -15,6 +15,8 @@
 #include "pm8916.dtsi"
 #include "apq8016-sbc-soc-pins.dtsi"
 #include "apq8016-sbc-pmic-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
@@ -85,6 +87,7 @@ adv_bridge: bridge@39 {
 				pinctrl-names = "default","sleep";
 				pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
 				pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+				#sound-dai-cells = <1>;
 
 				ports {
 					#address-cells = <1>;
@@ -285,6 +288,15 @@ sound: sound {
                         qcom,audio-routing =
                                 "AMIC2", "MIC BIAS Internal2",
                                 "AMIC3", "MIC BIAS External1";
+			external-dai-link@0 {
+				link-name = "ADV7533";
+				cpu { /* QUAT */
+					sound-dai = <&lpass MI2S_QUATERNARY>;
+				};
+				codec {
+					sound-dai = <&adv_bridge 0>;
+				};
+			};
 
                         internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
                                 link-name = "WCD";
@@ -306,6 +318,10 @@ codec {
                                 };
                         };
                 };
+
+		wcnss@a21b000 {
+			status = "okay";
+		};
 	};
 
 	usb2513 {
@@ -331,6 +347,22 @@ hdmi_con: endpoint {
 			};
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &wcd_codec {

arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi

@@ -5,11 +5,23 @@ &pm8994_gpios {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ls_exp_gpio_f>;
 
-	ls_exp_gpio_f: pm8916_mpp4 {
+	ls_exp_gpio_f: pm8994_gpio5 {
 		pinconf {
 			pins = "gpio5";
 			output-low;
 			power-source = <2>; // PM8994_GPIO_S4, 1.8V
 		};
 	};
+
+	volume_up_gpio: pm8996_gpio2 {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 };

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -15,6 +15,8 @@
 #include "pm8994.dtsi"
 #include "apq8096-db820c-pins.dtsi"
 #include "apq8096-db820c-pmic-pins.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -87,4 +89,21 @@ sdhci@74a4900 {
 			status = "okay";
 		};
 	};
+
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -720,4 +720,17 @@ pinconf {
 			};
 		};
 	};
+
+	wcnss_pin_a: wcnss-active {
+		pinmux {
+			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "wcss_wlan";
+		};
+
+		pinconf {
+			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -14,6 +14,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8916";
@@ -82,7 +83,7 @@ mpss_mem: mpss@86800000 {
 			no-map;
 		};
 
-		wcnss@89300000 {
+		wcnss_mem: wcnss@89300000 {
 			reg = <0x0 0x89300000 0x0 0x600000>;
 			no-map;
 		};
@@ -856,6 +857,76 @@ mpss {
 				memory-region = <&mpss_mem>;
 			};
 		};
+
+		pronto: wcnss@a21b000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			vddmx-supply = <&pm8916_l3>;
+			vddpx-supply = <&pm8916_l7>;
+
+			qcom,state = <&wcnss_smp2p_out 0>;
+			qcom,state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcnss_pin_a>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3620";
+
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8916_l7>;
+				vddrfa-supply = <&pm8916_s3>;
+				vddpa-supply = <&pm8916_l9>;
+				vdddig-supply = <&pm8916_l5>;
+			};
+
+			smd-edge {
+				interrupts = <0 142 1>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&pronto>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <0 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
 	};
 
 	smd {
@@ -871,7 +942,7 @@ rpm_requests {
 				qcom,smd-channels = "rpm_requests";
 
 				rpmcc: qcom,rpmcc {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					compatible = "qcom,rpmcc-msm8916";
 					#clock-cells = <1>;
 				};
 

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -258,6 +258,12 @@ psci {
 		method = "smc";
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8996";
+		};
+	};
+
 	tcsr_mutex: hwlock {
 		compatible = "qcom,tcsr-mutex";
 		syscon = <&tcsr_mutex_regs 0 0x1000>;