i40e: fix reading LLDP configuration

Previous method for reading LLDP config was based on hard-coded
offsets. It happened to work, because of structured architecture of
the NVM memory. In the new approach, known as FLAT, we need to
calculate the absolute address, instead of using relative values.
Needed defines for memory location were added.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_dcb.c

@@ -920,6 +920,70 @@ i40e_status i40e_init_dcb(struct i40e_hw *hw)
 	return ret;
 }
 
+/**
+ * _i40e_read_lldp_cfg - generic read of LLDP Configuration data from NVM
+ * @hw: pointer to the HW structure
+ * @lldp_cfg: pointer to hold lldp configuration variables
+ * @module: address of the module pointer
+ * @word_offset: offset of LLDP configuration
+ *
+ * Reads the LLDP configuration data from NVM using passed addresses
+ **/
+static i40e_status _i40e_read_lldp_cfg(struct i40e_hw *hw,
+				       struct i40e_lldp_variables *lldp_cfg,
+				       u8 module, u32 word_offset)
+{
+	u32 address, offset = (2 * word_offset);
+	i40e_status ret;
+	__le16 raw_mem;
+	u16 mem;
+
+	ret = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (ret)
+		return ret;
+
+	ret = i40e_aq_read_nvm(hw, 0x0, module * 2, sizeof(raw_mem), &raw_mem,
+			       true, NULL);
+	i40e_release_nvm(hw);
+	if (ret)
+		return ret;
+
+	mem = le16_to_cpu(raw_mem);
+	/* Check if this pointer needs to be read in word size or 4K sector
+	 * units.
+	 */
+	if (mem & I40E_PTR_TYPE)
+		address = (0x7FFF & mem) * 4096;
+	else
+		address = (0x7FFF & mem) * 2;
+
+	ret = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (ret)
+		goto err_lldp_cfg;
+
+	ret = i40e_aq_read_nvm(hw, module, offset, sizeof(raw_mem), &raw_mem,
+			       true, NULL);
+	i40e_release_nvm(hw);
+	if (ret)
+		return ret;
+
+	mem = le16_to_cpu(raw_mem);
+	offset = mem + word_offset;
+	offset *= 2;
+
+	ret = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (ret)
+		goto err_lldp_cfg;
+
+	ret = i40e_aq_read_nvm(hw, 0, address + offset,
+			       sizeof(struct i40e_lldp_variables), lldp_cfg,
+			       true, NULL);
+	i40e_release_nvm(hw);
+
+err_lldp_cfg:
+	return ret;
+}
+
 /**
  * i40e_read_lldp_cfg - read LLDP Configuration data from NVM
  * @hw: pointer to the HW structure
@@ -931,21 +995,34 @@ i40e_status i40e_read_lldp_cfg(struct i40e_hw *hw,
 			       struct i40e_lldp_variables *lldp_cfg)
 {
 	i40e_status ret = 0;
-	u32 offset = (2 * I40E_NVM_LLDP_CFG_PTR);
+	u32 mem;
 
 	if (!lldp_cfg)
 		return I40E_ERR_PARAM;
 
 	ret = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
 	if (ret)
-		goto err_lldp_cfg;
+		return ret;
 
-	ret = i40e_aq_read_nvm(hw, I40E_SR_EMP_MODULE_PTR, offset,
-			       sizeof(struct i40e_lldp_variables),
-			       (u8 *)lldp_cfg,
-			       true, NULL);
+	ret = i40e_aq_read_nvm(hw, I40E_SR_NVM_CONTROL_WORD, 0, sizeof(mem),
+			       &mem, true, NULL);
 	i40e_release_nvm(hw);
+	if (ret)
+		return ret;
+
+	/* Read a bit that holds information whether we are running flat or
+	 * structured NVM image. Flat image has LLDP configuration in shadow
+	 * ram, so there is a need to pass different addresses for both cases.
+	 */
+	if (mem & I40E_SR_NVM_MAP_STRUCTURE_TYPE) {
+		/* Flat NVM case */
+		ret = _i40e_read_lldp_cfg(hw, lldp_cfg, I40E_SR_EMP_MODULE_PTR,
+					  I40E_SR_LLDP_CFG_PTR);
+	} else {
+		/* Good old structured NVM image */
+		ret = _i40e_read_lldp_cfg(hw, lldp_cfg, I40E_EMP_MODULE_PTR,
+					  I40E_NVM_LLDP_CFG_PTR);
+	}
 
-err_lldp_cfg:
 	return ret;
 }

drivers/net/ethernet/intel/i40e/i40e_type.h

@@ -1294,7 +1294,8 @@ struct i40e_hw_port_stats {
 
 /* Checksum and Shadow RAM pointers */
 #define I40E_SR_NVM_CONTROL_WORD		0x00
-#define I40E_SR_EMP_MODULE_PTR			0x0F
+#define I40E_EMP_MODULE_PTR			0x0F
+#define I40E_SR_EMP_MODULE_PTR			0x48
 #define I40E_SR_PBA_FLAGS			0x15
 #define I40E_SR_PBA_BLOCK_PTR			0x16
 #define I40E_SR_BOOT_CONFIG_PTR			0x17
@@ -1313,6 +1314,8 @@ struct i40e_hw_port_stats {
 #define I40E_SR_PCIE_ALT_MODULE_MAX_SIZE	1024
 #define I40E_SR_CONTROL_WORD_1_SHIFT		0x06
 #define I40E_SR_CONTROL_WORD_1_MASK	(0x03 << I40E_SR_CONTROL_WORD_1_SHIFT)
+#define I40E_SR_CONTROL_WORD_1_NVM_BANK_VALID	BIT(5)
+#define I40E_SR_NVM_MAP_STRUCTURE_TYPE		BIT(12)
 #define I40E_PTR_TYPE				BIT(15)
 #define I40E_SR_OCP_CFG_WORD0			0x2B
 #define I40E_SR_OCP_ENABLED			BIT(15)
@@ -1430,7 +1433,8 @@ enum i40e_reset_type {
 };
 
 /* IEEE 802.1AB LLDP Agent Variables from NVM */
-#define I40E_NVM_LLDP_CFG_PTR		0xD
+#define I40E_NVM_LLDP_CFG_PTR	0x06
+#define I40E_SR_LLDP_CFG_PTR	0x31
 struct i40e_lldp_variables {
 	u16 length;
 	u16 adminstatus;

drivers/net/ethernet/intel/i40evf/i40e_type.h

@@ -1233,7 +1233,8 @@ struct i40e_hw_port_stats {
 
 /* Checksum and Shadow RAM pointers */
 #define I40E_SR_NVM_CONTROL_WORD		0x00
-#define I40E_SR_EMP_MODULE_PTR			0x0F
+#define I40E_EMP_MODULE_PTR			0x0F
+#define I40E_SR_EMP_MODULE_PTR			0x48
 #define I40E_NVM_OEM_VER_OFF			0x83
 #define I40E_SR_NVM_DEV_STARTER_VERSION		0x18
 #define I40E_SR_NVM_WAKE_ON_LAN			0x19
@@ -1249,6 +1250,9 @@ struct i40e_hw_port_stats {
 #define I40E_SR_PCIE_ALT_MODULE_MAX_SIZE	1024
 #define I40E_SR_CONTROL_WORD_1_SHIFT		0x06
 #define I40E_SR_CONTROL_WORD_1_MASK	(0x03 << I40E_SR_CONTROL_WORD_1_SHIFT)
+#define I40E_SR_CONTROL_WORD_1_NVM_BANK_VALID	BIT(5)
+#define I40E_SR_NVM_MAP_STRUCTURE_TYPE		BIT(12)
+#define I40E_PTR_TYPE				BIT(15)
 
 /* Shadow RAM related */
 #define I40E_SR_SECTOR_SIZE_IN_WORDS	0x800
@@ -1362,6 +1366,10 @@ enum i40e_reset_type {
 	I40E_RESET_EMPR		= 3,
 };
 
+/* IEEE 802.1AB LLDP Agent Variables from NVM */
+#define I40E_NVM_LLDP_CFG_PTR	0x06
+#define I40E_SR_LLDP_CFG_PTR	0x31
+
 /* RSS Hash Table Size */
 #define I40E_PFQF_CTL_0_HASHLUTSIZE_512	0x00010000