Merge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Nothing too crazy at the end of the cycle, the kmb modesetting fixes
  are probably a bit large but it's not a major driver, and its fixing
  monitor doesn't turn on type problems.

  Otherwise it's just a few minor patches, one ast regression revert, an
  msm power stability fix.

  ast:
   - fix regression with connector detect

  msm:
   - fix power stability issue

  msxfb:
   - fix crash on unload

  panel:
   - sync fix

  kmb:
   - modesetting fixes"

* tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/ast: Add detect function support"
  drm/kmb: Enable ADV bridge after modeset
  drm/kmb: Corrected typo in handle_lcd_irq
  drm/kmb: Disable change of plane parameters
  drm/kmb: Remove clearing DPHY regs
  drm/kmb: Limit supported mode to 1080p
  drm/kmb: Work around for higher system clock
  drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
  drm: mxsfb: Fix NULL pointer dereference crash on unload
  drm/msm/devfreq: Restrict idle clamping to a618 for now

drivers/gpu/drm/ast/ast_mode.c

@@ -1300,18 +1300,6 @@ static enum drm_mode_status ast_mode_valid(struct drm_connector *connector,
 	return flags;
 }
 
-static enum drm_connector_status ast_connector_detect(struct drm_connector
-						   *connector, bool force)
-{
-	int r;
-
-	r = ast_get_modes(connector);
-	if (r <= 0)
-		return connector_status_disconnected;
-
-	return connector_status_connected;
-}
-
 static void ast_connector_destroy(struct drm_connector *connector)
 {
 	struct ast_connector *ast_connector = to_ast_connector(connector);
@@ -1327,7 +1315,6 @@ static const struct drm_connector_helper_funcs ast_connector_helper_funcs = {
 
 static const struct drm_connector_funcs ast_connector_funcs = {
 	.reset = drm_atomic_helper_connector_reset,
-	.detect = ast_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = ast_connector_destroy,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
@@ -1355,8 +1342,7 @@ static int ast_connector_init(struct drm_device *dev)
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
-	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
-						DRM_CONNECTOR_POLL_DISCONNECT;
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	drm_connector_attach_encoder(connector, encoder);
 
@@ -1425,8 +1411,6 @@ int ast_mode_config_init(struct ast_private *ast)
 
 	drm_mode_config_reset(dev);
 
-	drm_kms_helper_poll_init(dev);
-
 	return 0;
 }
 

drivers/gpu/drm/kmb/kmb_crtc.c

@@ -66,7 +66,8 @@ static const struct drm_crtc_funcs kmb_crtc_funcs = {
 	.disable_vblank = kmb_crtc_disable_vblank,
 };
 
-static void kmb_crtc_set_mode(struct drm_crtc *crtc)
+static void kmb_crtc_set_mode(struct drm_crtc *crtc,
+			      struct drm_atomic_state *old_state)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_display_mode *m = &crtc->state->adjusted_mode;
@@ -75,7 +76,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc)
 	unsigned int val = 0;
 
 	/* Initialize mipi */
-	kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz);
+	kmb_dsi_mode_set(kmb->kmb_dsi, m, kmb->sys_clk_mhz, old_state);
 	drm_info(dev,
 		 "vfp= %d vbp= %d vsync_len=%d hfp=%d hbp=%d hsync_len=%d\n",
 		 m->crtc_vsync_start - m->crtc_vdisplay,
@@ -138,7 +139,7 @@ static void kmb_crtc_atomic_enable(struct drm_crtc *crtc,
 	struct kmb_drm_private *kmb = crtc_to_kmb_priv(crtc);
 
 	clk_prepare_enable(kmb->kmb_clk.clk_lcd);
-	kmb_crtc_set_mode(crtc);
+	kmb_crtc_set_mode(crtc, state);
 	drm_crtc_vblank_on(crtc);
 }
 
@@ -185,11 +186,45 @@ static void kmb_crtc_atomic_flush(struct drm_crtc *crtc,
 	spin_unlock_irq(&crtc->dev->event_lock);
 }
 
+static enum drm_mode_status
+		kmb_crtc_mode_valid(struct drm_crtc *crtc,
+				    const struct drm_display_mode *mode)
+{
+	int refresh;
+	struct drm_device *dev = crtc->dev;
+	int vfp = mode->vsync_start - mode->vdisplay;
+
+	if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) {
+		drm_dbg(dev, "height = %d less than %d",
+			mode->vdisplay, KMB_CRTC_MAX_HEIGHT);
+		return MODE_BAD_VVALUE;
+	}
+	if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) {
+		drm_dbg(dev, "width = %d less than %d",
+			mode->hdisplay, KMB_CRTC_MAX_WIDTH);
+		return MODE_BAD_HVALUE;
+	}
+	refresh = drm_mode_vrefresh(mode);
+	if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) {
+		drm_dbg(dev, "refresh = %d less than %d or greater than %d",
+			refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH);
+		return MODE_BAD;
+	}
+
+	if (vfp < KMB_CRTC_MIN_VFP) {
+		drm_dbg(dev, "vfp = %d less than %d", vfp, KMB_CRTC_MIN_VFP);
+		return MODE_BAD;
+	}
+
+	return MODE_OK;
+}
+
 static const struct drm_crtc_helper_funcs kmb_crtc_helper_funcs = {
 	.atomic_begin = kmb_crtc_atomic_begin,
 	.atomic_enable = kmb_crtc_atomic_enable,
 	.atomic_disable = kmb_crtc_atomic_disable,
 	.atomic_flush = kmb_crtc_atomic_flush,
+	.mode_valid = kmb_crtc_mode_valid,
 };
 
 int kmb_setup_crtc(struct drm_device *drm)

drivers/gpu/drm/kmb/kmb_drv.c

@@ -380,7 +380,7 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
 		if (val & LAYER3_DMA_FIFO_UNDERFLOW)
 			drm_dbg(&kmb->drm,
 				"LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val);
-		if (val & LAYER3_DMA_FIFO_UNDERFLOW)
+		if (val & LAYER3_DMA_FIFO_OVERFLOW)
 			drm_dbg(&kmb->drm,
 				"LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val);
 	}

drivers/gpu/drm/kmb/kmb_drv.h

@@ -20,11 +20,18 @@
 #define DRIVER_MAJOR			1
 #define DRIVER_MINOR			1
 
+/* Platform definitions */
+#define KMB_CRTC_MIN_VFP		4
+#define KMB_CRTC_MAX_WIDTH		1920 /* max width in pixels */
+#define KMB_CRTC_MAX_HEIGHT		1080 /* max height in pixels */
+#define KMB_CRTC_MIN_WIDTH		1920
+#define KMB_CRTC_MIN_HEIGHT		1080
 #define KMB_FB_MAX_WIDTH		1920
 #define KMB_FB_MAX_HEIGHT		1080
 #define KMB_FB_MIN_WIDTH		1
 #define KMB_FB_MIN_HEIGHT		1
-
+#define KMB_MIN_VREFRESH		59    /*vertical refresh in Hz */
+#define KMB_MAX_VREFRESH		60    /*vertical refresh in Hz */
 #define KMB_LCD_DEFAULT_CLK		200000000
 #define KMB_SYS_CLK_MHZ			500
 
@@ -50,6 +57,7 @@ struct kmb_drm_private {
 	spinlock_t			irq_lock;
 	int				irq_lcd;
 	int				sys_clk_mhz;
+	struct disp_cfg			init_disp_cfg[KMB_MAX_PLANES];
 	struct layer_status		plane_status[KMB_MAX_PLANES];
 	int				kmb_under_flow;
 	int				kmb_flush_done;

drivers/gpu/drm/kmb/kmb_dsi.c

@@ -482,6 +482,10 @@ static u32 mipi_tx_fg_section_cfg(struct kmb_dsi *kmb_dsi,
 	return 0;
 }
 
+#define CLK_DIFF_LOW 50
+#define CLK_DIFF_HI 60
+#define SYSCLK_500  500
+
 static void mipi_tx_fg_cfg_regs(struct kmb_dsi *kmb_dsi, u8 frame_gen,
 				struct mipi_tx_frame_timing_cfg *fg_cfg)
 {
@@ -492,7 +496,12 @@ static void mipi_tx_fg_cfg_regs(struct kmb_dsi *kmb_dsi, u8 frame_gen,
 	/* 500 Mhz system clock minus 50 to account for the difference in
 	 * MIPI clock speed in RTL tests
 	 */
-	sysclk = kmb_dsi->sys_clk_mhz - 50;
+	if (kmb_dsi->sys_clk_mhz == SYSCLK_500) {
+		sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_LOW;
+	} else {
+		/* 700 Mhz clk*/
+		sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_HI;
+	}
 
 	/* PPL-Pixel Packing Layer, LLP-Low Level Protocol
 	 * Frame genartor timing parameters are clocked on the system clock,
@@ -1322,7 +1331,8 @@ static u32 mipi_tx_init_dphy(struct kmb_dsi *kmb_dsi,
 	return 0;
 }
 
-static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
+static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi,
+				struct drm_atomic_state *old_state)
 {
 	struct regmap *msscam;
 
@@ -1331,7 +1341,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
 		dev_dbg(kmb_dsi->dev, "failed to get msscam syscon");
 		return;
 	}
-
+	drm_atomic_bridge_chain_enable(adv_bridge, old_state);
 	/* DISABLE MIPI->CIF CONNECTION */
 	regmap_write(msscam, MSS_MIPI_CIF_CFG, 0);
 
@@ -1342,7 +1352,7 @@ static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi)
 }
 
 int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
-		     int sys_clk_mhz)
+		     int sys_clk_mhz, struct drm_atomic_state *old_state)
 {
 	u64 data_rate;
 
@@ -1384,18 +1394,13 @@ int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
 		mipi_tx_init_cfg.lane_rate_mbps = data_rate;
 	}
 
-	kmb_write_mipi(kmb_dsi, DPHY_ENABLE, 0);
-	kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL0, 0);
-	kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL1, 0);
-	kmb_write_mipi(kmb_dsi, DPHY_INIT_CTRL2, 0);
-
 	/* Initialize mipi controller */
 	mipi_tx_init_cntrl(kmb_dsi, &mipi_tx_init_cfg);
 
 	/* Dphy initialization */
 	mipi_tx_init_dphy(kmb_dsi, &mipi_tx_init_cfg);
 
-	connect_lcd_to_mipi(kmb_dsi);
+	connect_lcd_to_mipi(kmb_dsi, old_state);
 	dev_info(kmb_dsi->dev, "mipi hw initialized");
 
 	return 0;

drivers/gpu/drm/kmb/kmb_dsi.h

@@ -380,7 +380,7 @@ int kmb_dsi_host_bridge_init(struct device *dev);
 struct kmb_dsi *kmb_dsi_init(struct platform_device *pdev);
 void kmb_dsi_host_unregister(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
-		     int sys_clk_mhz);
+		     int sys_clk_mhz, struct drm_atomic_state *old_state);
 int kmb_dsi_map_mmio(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_clk_init(struct kmb_dsi *kmb_dsi);
 int kmb_dsi_encoder_init(struct drm_device *dev, struct kmb_dsi *kmb_dsi);

drivers/gpu/drm/kmb/kmb_plane.c

@@ -67,8 +67,21 @@ static const u32 kmb_formats_v[] = {
 
 static unsigned int check_pixel_format(struct drm_plane *plane, u32 format)
 {
+	struct kmb_drm_private *kmb;
+	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
 	int i;
+	int plane_id = kmb_plane->id;
+	struct disp_cfg init_disp_cfg;
 
+	kmb = to_kmb(plane->dev);
+	init_disp_cfg = kmb->init_disp_cfg[plane_id];
+	/* Due to HW limitations, changing pixel format after initial
+	 * plane configuration is not supported.
+	 */
+	if (init_disp_cfg.format && init_disp_cfg.format != format) {
+		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration");
+		return -EINVAL;
+	}
 	for (i = 0; i < plane->format_count; i++) {
 		if (plane->format_types[i] == format)
 			return 0;
@@ -81,11 +94,17 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
 {
 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
 										 plane);
+	struct kmb_drm_private *kmb;
+	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
+	int plane_id = kmb_plane->id;
+	struct disp_cfg init_disp_cfg;
 	struct drm_framebuffer *fb;
 	int ret;
 	struct drm_crtc_state *crtc_state;
 	bool can_position;
 
+	kmb = to_kmb(plane->dev);
+	init_disp_cfg = kmb->init_disp_cfg[plane_id];
 	fb = new_plane_state->fb;
 	if (!fb || !new_plane_state->crtc)
 		return 0;
@@ -99,6 +118,16 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
 	    new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
 	    new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
 		return -EINVAL;
+
+	/* Due to HW limitations, changing plane height or width after
+	 * initial plane configuration is not supported.
+	 */
+	if ((init_disp_cfg.width && init_disp_cfg.height) &&
+	    (init_disp_cfg.width != fb->width ||
+	    init_disp_cfg.height != fb->height)) {
+		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration");
+		return -EINVAL;
+	}
 	can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
 	crtc_state =
 		drm_atomic_get_existing_crtc_state(state,
@@ -335,6 +364,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 	unsigned char plane_id;
 	int num_planes;
 	static dma_addr_t addr[MAX_SUB_PLANES];
+	struct disp_cfg *init_disp_cfg;
 
 	if (!plane || !new_plane_state || !old_plane_state)
 		return;
@@ -357,7 +387,8 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 	}
 	spin_unlock_irq(&kmb->irq_lock);
 
-	src_w = (new_plane_state->src_w >> 16);
+	init_disp_cfg = &kmb->init_disp_cfg[plane_id];
+	src_w = new_plane_state->src_w >> 16;
 	src_h = new_plane_state->src_h >> 16;
 	crtc_x = new_plane_state->crtc_x;
 	crtc_y = new_plane_state->crtc_y;
@@ -500,6 +531,16 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 
 	/* Enable DMA */
 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
+
+	/* Save initial display config */
+	if (!init_disp_cfg->width ||
+	    !init_disp_cfg->height ||
+	    !init_disp_cfg->format) {
+		init_disp_cfg->width = width;
+		init_disp_cfg->height = height;
+		init_disp_cfg->format = fb->format->format;
+	}
+
 	drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
 		kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id)));
 

drivers/gpu/drm/kmb/kmb_plane.h

@@ -63,6 +63,12 @@ struct layer_status {
 	u32 ctrl;
 };
 
+struct disp_cfg {
+	unsigned int width;
+	unsigned int height;
+	unsigned int format;
+};
+
 struct kmb_plane *kmb_plane_init(struct drm_device *drm);
 void kmb_plane_destroy(struct drm_plane *plane);
 #endif /* __KMB_PLANE_H__ */

drivers/gpu/drm/msm/adreno/a6xx_gpu.c

@@ -1838,6 +1838,13 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
 			adreno_cmp_rev(ADRENO_REV(6, 3, 5, ANY_ID), info->rev)))
 		adreno_gpu->base.hw_apriv = true;
 
+	/*
+	 * For now only clamp to idle freq for devices where this is known not
+	 * to cause power supply issues:
+	 */
+	if (info && (info->revn == 618))
+		gpu->clamp_to_idle = true;
+
 	a6xx_llc_slices_init(pdev, a6xx_gpu);
 
 	ret = a6xx_set_supported_hw(&pdev->dev, config->rev);

drivers/gpu/drm/msm/msm_gpu.h

@@ -203,6 +203,10 @@ struct msm_gpu {
 	uint32_t suspend_count;
 
 	struct msm_gpu_state *crashstate;
+
+	/* Enable clamping to idle freq when inactive: */
+	bool clamp_to_idle;
+
 	/* True if the hardware supports expanded apriv (a650 and newer) */
 	bool hw_apriv;
 

drivers/gpu/drm/msm/msm_gpu_devfreq.c

@@ -200,7 +200,8 @@ void msm_devfreq_idle(struct msm_gpu *gpu)
 
 	idle_freq = get_freq(gpu);
 
-	msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0);
+	if (gpu->clamp_to_idle)
+		msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0);
 
 	df->idle_time = ktime_get();
 	df->idle_freq = idle_freq;

drivers/gpu/drm/mxsfb/mxsfb_drv.c

@@ -173,7 +173,11 @@ static void mxsfb_irq_disable(struct drm_device *drm)
 	struct mxsfb_drm_private *mxsfb = drm->dev_private;
 
 	mxsfb_enable_axi_clk(mxsfb);
-	mxsfb->crtc.funcs->disable_vblank(&mxsfb->crtc);
+
+	/* Disable and clear VBLANK IRQ */
+	writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+	writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+
 	mxsfb_disable_axi_clk(mxsfb);
 }
 

drivers/gpu/drm/panel/panel-ilitek-ili9881c.c

@@ -590,14 +590,14 @@ static const struct drm_display_mode k101_im2byl02_default_mode = {
 	.clock		= 69700,
 
 	.hdisplay	= 800,
-	.hsync_start	= 800 + 6,
-	.hsync_end	= 800 + 6 + 15,
-	.htotal		= 800 + 6 + 15 + 16,
+	.hsync_start	= 800 + 52,
+	.hsync_end	= 800 + 52 + 8,
+	.htotal		= 800 + 52 + 8 + 48,
 
 	.vdisplay	= 1280,
-	.vsync_start	= 1280 + 8,
-	.vsync_end	= 1280 + 8 + 48,
-	.vtotal		= 1280 + 8 + 48 + 52,
+	.vsync_start	= 1280 + 16,
+	.vsync_end	= 1280 + 16 + 6,
+	.vtotal		= 1280 + 16 + 6 + 15,
 
 	.width_mm	= 135,
 	.height_mm	= 217,