arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support

This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523175344.5845-6-markuss.broks@gmail.com

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi

@@ -249,6 +249,24 @@ &blsp2_uart1 {
 	status = "okay";
 };
 
+&blsp2_i2c2 {
+	status = "okay";
+
+	proximity@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&cam_vio_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tof_int &tof_reset>;
+	};
+};
+
 &ibb {
 	regulator-min-microamp = <800000>;
 	regulator-max-microamp = <800000>;
@@ -597,6 +615,14 @@ cam0_vdig_default: cam0-vdig-default {
 		drive-strength = <2>;
 	};
 
+	tof_int: tof-int {
+		pins = "gpio22";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+		input-enable;
+	};
+
 	cam1_vdig_default: cam1-vdig-default {
 		pins = "gpio25";
 		function = "gpio";
@@ -611,6 +637,13 @@ usb_extcon_active: usb-extcon-active {
 		drive-strength = <16>;
 	};
 
+	tof_reset: tof-reset {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
 	hall_sensor0_default: acc-cover-open {
 		pins = "gpio124";
 		function = "gpio";