ALSA: bebob: fix model-id of unit for Apogee Ensemble
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Showing
Please register or sign in to comment