Commit 65390ea0 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

Merge branch 'patchwork' into v4l_for_linus

* patchwork: (496 commits)
  [media] v4l: tvp5150: Add missing break in set control handler
  [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
  [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
  [media] em28xx: don't store usb_device at struct em28xx
  [media] em28xx: use usb_interface for dev_foo() calls
  [media] em28xx: don't change the device's name
  [media] mn88472: fix chip id check on probe
  [media] mn88473: fix chip id check on probe
  [media] lirc: fix error paths in lirc_cdev_add()
  [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
  [media] s5p-mfc: Rework clock handling
  [media] s5p-mfc: Don't keep clock prepared all the time
  [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
  [media] s5p-mfc: Remove dead conditional code
  [media] s5p-mfc: Ensure that clock is disabled before turning power off
  [media] s5p-mfc: Remove special clock rate management
  [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
  [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
  [media] vivid: Set color_enc on HSV formats
  [media] v4l2-tpg: Init hv_enc field with a valid value
  ...
parents e7aa8c2e d183e4ef
......@@ -3,7 +3,8 @@
G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
Required properties:
- compatible: should be "samsung,exynos5-gsc"
- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and
5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433)
- reg: should contain G-Scaler physical address location and length.
- interrupts: should contain G-Scaler interrupt number
......
......@@ -8,10 +8,11 @@ Required properties:
the device. The interrupt specifier format depends on the interrupt
controller parent.
- clocks: clock phandle and specifier pair.
- hisilicon,power-syscon: phandle of syscon used to control power.
Optional properties:
- linux,rc-map-name : Remote control map name.
- hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files.
Provide correct clocks instead.
Example node:
......@@ -19,7 +20,6 @@ Example node:
compatible = "hisilicon,hix5hd2-ir";
reg = <0xf8001000 0x1000>;
interrupts = <0 47 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
hisilicon,power-syscon = <&sysctrl>;
clocks = <&clock HIX5HD2_IR_CLOCK>;
linux,rc-map-name = "rc-tivo";
};
......@@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint.
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
- default-input: Select which input is selected after reset.
Optional Endpoint Properties:
......@@ -47,8 +48,6 @@ Optional Endpoint Properties:
If none of hsync-active, vsync-active and pclk-sample is specified the
endpoint will use embedded BT.656 synchronization.
- default-input: Select which input is selected after reset.
Example:
hdmi_receiver@4c {
......
* Mediatek Media Data Path
Media Data Path is used for scaling and color space conversion.
Required properties (controller (parent) node):
- compatible: "mediatek,mt8173-mdp"
- mediatek,vpu: the node of video processor unit, see
Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
Required properties (all function blocks, child node):
- compatible: Should be one of
"mediatek,mt8173-mdp-rdma" - read DMA
"mediatek,mt8173-mdp-rsz" - resizer
"mediatek,mt8173-mdp-wdma" - write DMA
"mediatek,mt8173-mdp-wrot" - write DMA with rotation
- reg: Physical base address and length of the function block register space
- clocks: device clocks, see
Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
Required properties (DMA function blocks, child node):
- compatible: Should be one of
"mediatek,mt8173-mdp-rdma"
"mediatek,mt8173-mdp-wdma"
"mediatek,mt8173-mdp-wrot"
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
- mediatek,larb: must contain the local arbiters in the current Socs, see
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
for details.
Example:
mdp {
compatible = "mediatek,mt8173-mdp";
#address-cells = <2>;
#size-cells = <2>;
ranges;
mediatek,vpu = <&vpu>;
mdp_rdma0: rdma@14001000 {
compatible = "mediatek,mt8173-mdp-rdma";
reg = <0 0x14001000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RDMA0>,
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
mediatek,larb = <&larb0>;
};
mdp_rdma1: rdma@14002000 {
compatible = "mediatek,mt8173-mdp-rdma";
reg = <0 0x14002000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RDMA1>,
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14003000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
};
mdp_rsz1: rsz@14004000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14004000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
};
mdp_rsz2: rsz@14005000 {
compatible = "mediatek,mt8173-mdp-rsz";
reg = <0 0x14005000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_RSZ2>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
};
mdp_wdma0: wdma@14006000 {
compatible = "mediatek,mt8173-mdp-wdma";
reg = <0 0x14006000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
compatible = "mediatek,mt8173-mdp-wrot";
reg = <0 0x14007000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
compatible = "mediatek,mt8173-mdp-wrot";
reg = <0 0x14008000 0 0x1000>;
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
mediatek,larb = <&larb4>;
};
};
Mediatek Video Codec
Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
supports high resolution encoding functionalities.
supports high resolution encoding and decoding functionalities.
Required properties:
- compatible : "mediatek,mt8173-vcodec-enc" for encoder
"mediatek,mt8173-vcodec-dec" for decoder.
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names: encoder must contain "venc_sel_src", "venc_sel",
- "venc_lt_sel_src", "venc_lt_sel".
- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
"venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
"univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
"venc_lt_sel", "vdec_bus_clk_src".
- iommus : should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
- mediatek,vpu : the node of video processor unit
Example:
vcodec_enc: vcodec@0x18002000 {
vcodec_dec: vcodec@16000000 {
compatible = "mediatek,mt8173-vcodec-dec";
reg = <0 0x16000000 0 0x100>, /*VDEC_SYS*/
<0 0x16020000 0 0x1000>, /*VDEC_MISC*/
<0 0x16021000 0 0x800>, /*VDEC_LD*/
<0 0x16021800 0 0x800>, /*VDEC_TOP*/
<0 0x16022000 0 0x1000>, /*VDEC_CM*/
<0 0x16023000 0 0x1000>, /*VDEC_AD*/
<0 0x16024000 0 0x1000>, /*VDEC_AV*/
<0 0x16025000 0 0x1000>, /*VDEC_PP*/
<0 0x16026800 0 0x800>, /*VP8_VD*/
<0 0x16027000 0 0x800>, /*VP6_VD*/
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
<&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
<&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
<&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
<&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
<&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
mediatek,vpu = <&vpu>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
<&topckgen CLK_TOP_UNIVPLL_D2>,
<&topckgen CLK_TOP_CCI400_SEL>,
<&topckgen CLK_TOP_VDEC_SEL>,
<&topckgen CLK_TOP_VCODECPLL>,
<&apmixedsys CLK_APMIXED_VENCPLL>,
<&topckgen CLK_TOP_VENC_LT_SEL>,
<&topckgen CLK_TOP_VCODECPLL_370P5>;
clock-names = "vcodecpll",
"univpll_d2",
"clk_cci400_sel",
"vdec_sel",
"vdecpll",
"vencpll",
"venc_lt_sel",
"vdec_bus_clk_src";
};
vcodec_enc: vcodec@0x18002000 {
compatible = "mediatek,mt8173-vcodec-enc";
reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
......
Renesas R-Car Fine Display Processor (FDP1)
-------------------------------------------
The FDP1 is a de-interlacing module which converts interlaced video to
progressive video. It is capable of performing pixel format conversion between
YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
an input to the module.
Required properties:
- compatible: must be "renesas,fdp1"
- reg: the register base and size for the device registers
- interrupts : interrupt specifier for the FDP1 instance
- clocks: reference to the functional clock
Optional properties:
- power-domains: reference to the power domain that the FDP1 belongs to, if
any.
- renesas,fcp: a phandle referencing the FCP that handles memory accesses
for the FDP1. Not needed on Gen2, mandatory on Gen3.
Please refer to the binding documentation for the clock and/or power domain
providers for more details.
Device node example
-------------------
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpf0>;
};
......@@ -12,6 +12,7 @@ Required properties:
(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
- reg : Physical base address of the IP registers and length of memory
mapped region.
......
......@@ -88,7 +88,7 @@ $(BUILDDIR)/videodev2.h.rst: ${UAPI}/videodev2.h ${PARSER} $(SRC_DIR)/videodev2.
$(BUILDDIR)/media.h.rst: ${UAPI}/media.h ${PARSER} $(SRC_DIR)/media.h.rst.exceptions
@$($(quiet)gen_rst)
$(BUILDDIR)/cec.h.rst: ${KAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions
$(BUILDDIR)/cec.h.rst: ${UAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions
@$($(quiet)gen_rst)
$(BUILDDIR)/lirc.h.rst: ${UAPI}/lirc.h ${PARSER} $(SRC_DIR)/lirc.h.rst.exceptions
......
......@@ -37,9 +37,8 @@ The struct cec_adapter represents the CEC adapter hardware. It is created by
calling cec_allocate_adapter() and deleted by calling cec_delete_adapter():
.. c:function::
struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
void *priv, const char *name, u32 caps, u8 available_las,
struct device *parent);
struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv,
const char *name, u32 caps, u8 available_las);
.. c:function::
void cec_delete_adapter(struct cec_adapter *adap);
......@@ -66,20 +65,19 @@ available_las:
the number of simultaneous logical addresses that this
adapter can handle. Must be 1 <= available_las <= CEC_MAX_LOG_ADDRS.
parent:
the parent device.
To register the /dev/cecX device node and the remote control device (if
CEC_CAP_RC is set) you call:
.. c:function::
int cec_register_adapter(struct cec_adapter \*adap);
int cec_register_adapter(struct cec_adapter *adap, struct device *parent);
where parent is the parent device.
To unregister the devices call:
.. c:function::
void cec_unregister_adapter(struct cec_adapter \*adap);
void cec_unregister_adapter(struct cec_adapter *adap);
Note: if cec_register_adapter() fails, then call cec_delete_adapter() to
clean up. But if cec_register_adapter() succeeded, then only call
......@@ -106,13 +104,13 @@ your driver:
int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
u32 signal_free_time, struct cec_msg *msg);
void (\*adap_log_status)(struct cec_adapter *adap);
void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
/* High-level callbacks */
...
};
The three low-level ops deal with various aspects of controlling the CEC adapter
The five low-level ops deal with various aspects of controlling the CEC adapter
hardware:
......@@ -238,6 +236,18 @@ When a CEC message was received:
Speaks for itself.
Implementing the interrupt handler
----------------------------------
Typically the CEC hardware provides interrupts that signal when a transmit
finished and whether it was successful or not, and it provides and interrupt
when a CEC message was received.
The CEC driver should always process the transmit interrupts first before
handling the receive interrupt. The framework expects to see the cec_transmit_done
call before the cec_received_msg call, otherwise it can get confused if the
received message was in reply to the transmitted message.
Implementing the High-Level CEC Adapter
---------------------------------------
......@@ -247,11 +257,11 @@ CEC protocol driven. The following high-level callbacks are available:
.. code-block:: none
struct cec_adap_ops {
/\* Low-level callbacks \*/
/* Low-level callbacks */
...
/\* High-level CEC message callback \*/
int (\*received)(struct cec_adapter \*adap, struct cec_msg \*msg);
/* High-level CEC message callback */
int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
};
The received() callback allows the driver to optionally handle a newly
......@@ -263,7 +273,7 @@ received CEC message
If the driver wants to process a CEC message, then it can implement this
callback. If it doesn't want to handle this message, then it should return
-ENOMSG, otherwise the CEC framework assumes it processed this message and
it will not no anything with it.
it will not do anything with it.
CEC framework functions
......
MIPI CSI-2
==========
CSI-2 is a data bus intended for transferring images from cameras to
the host SoC. It is defined by the `MIPI alliance`_.
.. _`MIPI alliance`: http://www.mipi.org/
Transmitter drivers
-------------------
CSI-2 transmitter, such as a sensor or a TV tuner, drivers need to
provide the CSI-2 receiver with information on the CSI-2 bus
configuration. These include the V4L2_CID_LINK_FREQ and
V4L2_CID_PIXEL_RATE controls and
(:c:type:`v4l2_subdev_video_ops`->s_stream() callback). These
interface elements must be present on the sub-device represents the
CSI-2 transmitter.
The V4L2_CID_LINK_FREQ control is used to tell the receiver driver the
frequency (and not the symbol rate) of the link. The
V4L2_CID_PIXEL_RATE is may be used by the receiver to obtain the pixel
rate the transmitter uses. The
:c:type:`v4l2_subdev_video_ops`->s_stream() callback provides an
ability to start and stop the stream.
The value of the V4L2_CID_PIXEL_RATE is calculated as follows::
pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample
where
.. list-table:: variables in pixel rate calculation
:header-rows: 1
* - variable or constant
- description
* - link_freq
- The value of the V4L2_CID_LINK_FREQ integer64 menu item.
* - nr_of_lanes
- Number of data lanes used on the CSI-2 link. This can
be obtained from the OF endpoint configuration.
* - 2
- Two bits are transferred per clock cycle per lane.
* - bits_per_sample
- Number of bits per sample.
The transmitter drivers must configure the CSI-2 transmitter to *LP-11
mode* whenever the transmitter is powered on but not active. Some
transmitters do this automatically but some have to be explicitly
programmed to do so.
Receiver drivers
----------------
Before the receiver driver may enable the CSI-2 transmitter by using
the :c:type:`v4l2_subdev_video_ops`->s_stream(), it must have powered
the transmitter up by using the
:c:type:`v4l2_subdev_core_ops`->s_power() callback. This may take
place either indirectly by using :c:func:`v4l2_pipeline_pm_use` or
directly.
......@@ -8,14 +8,6 @@ Digital TV Common functions
.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
.. kernel-doc:: drivers/media/dvb-core/dvb_math.h
:export: drivers/media/dvb-core/dvb_math.c
.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
:export: drivers/media/dvb-core/dvbdev.c
Digital TV Ring buffer
----------------------
......
......@@ -33,3 +33,4 @@ For more details see the file COPYING in the source distribution of Linux.
kapi/rc-core
kapi/mc-core
kapi/cec-core
kapi/csi2
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -48,41 +48,21 @@ returns the information to the application. The ioctl never fails.
:stub-columns: 0
:widths: 1 1 16
- .. row 1
- char
- ``driver[32]``
- The name of the cec adapter driver.
- .. row 2
- char
- ``name[32]``
- The name of this CEC adapter. The combination ``driver`` and
``name`` must be unique.
- .. row 3
- __u32
- ``capabilities``
- The capabilities of the CEC adapter, see
:ref:`cec-capabilities`.
- .. row 4
- __u32
- ``version``
- CEC Framework API version, formatted with the ``KERNEL_VERSION()``
macro.
* - char
- ``driver[32]``
- The name of the cec adapter driver.
* - char
- ``name[32]``
- The name of this CEC adapter. The combination ``driver`` and
``name`` must be unique.
* - __u32
- ``capabilities``
- The capabilities of the CEC adapter, see
:ref:`cec-capabilities`.
* - __u32
- ``version``
- CEC Framework API version, formatted with the ``KERNEL_VERSION()``
macro.
.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
......@@ -94,68 +74,50 @@ returns the information to the application. The ioctl never fails.
:stub-columns: 0
:widths: 3 1 8
- .. _`CEC-CAP-PHYS-ADDR`:
- ``CEC_CAP_PHYS_ADDR``
- 0x00000001
- Userspace has to configure the physical address by calling
:ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
this capability isn't set, then setting the physical address is
handled by the kernel whenever the EDID is set (for an HDMI
receiver) or read (for an HDMI transmitter).
- .. _`CEC-CAP-LOG-ADDRS`:
- ``CEC_CAP_LOG_ADDRS``
- 0x00000002
- Userspace has to configure the logical addresses by calling
:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
this capability isn't set, then the kernel will have configured
this.
- .. _`CEC-CAP-TRANSMIT`:
- ``CEC_CAP_TRANSMIT``
- 0x00000004
- Userspace can transmit CEC messages by calling
:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
userspace can be a follower as well, since being able to transmit
messages is a prerequisite of becoming a follower. If this
capability isn't set, then the kernel will handle all CEC
transmits and process all CEC messages it receives.
- .. _`CEC-CAP-PASSTHROUGH`:
- ``CEC_CAP_PASSTHROUGH``
- 0x00000008
- Userspace can use the passthrough mode by calling
:ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
- .. _`CEC-CAP-RC`:
- ``CEC_CAP_RC``
- 0x00000010
- This adapter supports the remote control protocol.
- .. _`CEC-CAP-MONITOR-ALL`:
- ``CEC_CAP_MONITOR_ALL``
- 0x00000020
- The CEC hardware can monitor all messages, not just directed and
broadcast messages.
* .. _`CEC-CAP-PHYS-ADDR`:
- ``CEC_CAP_PHYS_ADDR``
- 0x00000001
- Userspace has to configure the physical address by calling
:ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
this capability isn't set, then setting the physical address is
handled by the kernel whenever the EDID is set (for an HDMI
receiver) or read (for an HDMI transmitter).
* .. _`CEC-CAP-LOG-ADDRS`:
- ``CEC_CAP_LOG_ADDRS``
- 0x00000002
- Userspace has to configure the logical addresses by calling
:ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
this capability isn't set, then the kernel will have configured
this.
* .. _`CEC-CAP-TRANSMIT`:
- ``CEC_CAP_TRANSMIT``
- 0x00000004
- Userspace can transmit CEC messages by calling
:ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
userspace can be a follower as well, since being able to transmit
messages is a prerequisite of becoming a follower. If this
capability isn't set, then the kernel will handle all CEC
transmits and process all CEC messages it receives.
* .. _`CEC-CAP-PASSTHROUGH`:
- ``CEC_CAP_PASSTHROUGH``
- 0x00000008
- Userspace can use the passthrough mode by calling
:ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
* .. _`CEC-CAP-RC`:
- ``CEC_CAP_RC``
- 0x00000010
- This adapter supports the remote control protocol.
* .. _`CEC-CAP-MONITOR-ALL`:
- ``CEC_CAP_MONITOR_ALL``
- 0x00000020
- The CEC hardware can monitor all messages, not just directed and
broadcast messages.
......
......@@ -58,26 +58,16 @@ it is guaranteed that the state did change in between the two events.
:stub-columns: 0
:widths: 1 1 8
- .. row 1
- __u16
- ``phys_addr``
- The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
* - __u16
- ``phys_addr``
- The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
valid physical address is set.
- .. row 2
- __u16
- ``log_addr_mask``
- The current set of claimed logical addresses. This is 0 if no logical
addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
has the unregistered logical address. In that case all other bits are 0.
* - __u16
- ``log_addr_mask``
- The current set of claimed logical addresses. This is 0 if no logical
addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
has the unregistered logical address. In that case all other bits are 0.
.. c:type:: cec_event_lost_msgs
......@@ -89,22 +79,17 @@ it is guaranteed that the state did change in between the two events.
:stub-columns: 0
:widths: 1 1 16
- .. row 1
- __u32
- ``lost_msgs``
- Set to the number of lost messages since the filehandle was opened
or since the last time this event was dequeued for this
filehandle. The messages lost are the oldest messages. So when a
new message arrives and there is no more room, then the oldest
message is discarded to make room for the new one. The internal
size of the message queue guarantees that all messages received in
the last two seconds will be stored. Since messages should be
replied to within a second according to the CEC specification,
this is more than enough.
* - __u32
- ``lost_msgs``
- Set to the number of lost messages since the filehandle was opened
or since the last time this event was dequeued for this
filehandle. The messages lost are the oldest messages. So when a
new message arrives and there is no more room, then the oldest
message is discarded to make room for the new one. The internal
size of the message queue guarantees that all messages received in
the last two seconds will be stored. Since messages should be
replied to within a second according to the CEC specification,
this is more than enough.
.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{2.5cm}|p{8.8cm}|
......@@ -116,62 +101,32 @@ it is guaranteed that the state did change in between the two events.
:stub-columns: 0
:widths: 1 1 1 8
- .. row 1
- __u64
- ``ts``
- :cspan:`1` Timestamp of the event in ns.
The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
the same clock from userspace use :c:func:`clock_gettime`.
- .. row 2
- __u32
- ``event``
- :cspan:`1` The CEC event type, see :ref:`cec-events`.
- .. row 3
- __u32
- ``flags``
- :cspan:`1` Event flags, see :ref:`cec-event-flags`.
- .. row 4
- union
- (anonymous)
-
-
- .. row 5
-
- struct cec_event_state_change
- ``state_change``
- The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
event.
- .. row 6
-
- struct cec_event_lost_msgs
- ``lost_msgs``
- The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
event.
* - __u64
- ``ts``
- :cspan:`1` Timestamp of the event in ns.
The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
the same clock from userspace use :c:func:`clock_gettime`.
* - __u32
- ``event``
- :cspan:`1` The CEC event type, see :ref:`cec-events`.
* - __u32
- ``flags``
- :cspan:`1` Event flags, see :ref:`cec-event-flags`.
* - union
- (anonymous)
-
-
* -
- struct cec_event_state_change
- ``state_change``
- The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
event.
* -
- struct cec_event_lost_msgs
- ``lost_msgs``
- The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
event.
.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
......@@ -183,25 +138,19 @@ it is guaranteed that the state did change in between the two events.
:stub-columns: 0
:widths: 3 1 16
* .. _`CEC-EVENT-STATE-CHANGE`:
- .. _`CEC-EVENT-STATE-CHANGE`:
- ``CEC_EVENT_STATE_CHANGE``
- 1
- Generated when the CEC Adapter's state changes. When open() is
called an initial event will be generated for that filehandle with
the CEC Adapter's state at that time.
- .. _`CEC-EVENT-LOST-MSGS`:
- ``CEC_EVENT_STATE_CHANGE``
- 1
- Generated when the CEC Adapter's state changes. When open() is
called an initial event will be generated for that filehandle with
the CEC Adapter's state at that time.
* .. _`CEC-EVENT-LOST-MSGS`:
- ``CEC_EVENT_LOST_MSGS``
- 2
- Generated if one or more CEC messages were lost because the
application didn't dequeue CEC messages fast enough.
- ``CEC_EVENT_LOST_MSGS``
- 2
- Generated if one or more CEC messages were lost because the
application didn't dequeue CEC messages fast enough.
.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
......@@ -213,17 +162,14 @@ it is guaranteed that the state did change in between the two events.
:stub-columns: 0
:widths: 3 1 8
* .. _`CEC-EVENT-FL-INITIAL-VALUE`:
- .. _`CEC-EVENT-FL-INITIAL-VALUE`:
- ``CEC_EVENT_FL_INITIAL_VALUE``
- 1
- Set for the initial events that are generated when the device is
opened. See the table above for which events do this. This allows
applications to learn the initial state of the CEC adapter at
open() time.
- ``CEC_EVENT_FL_INITIAL_VALUE``
- 1
- Set for the initial events that are generated when the device is
opened. See the table above for which events do this. This allows
applications to learn the initial state of the CEC adapter at
open() time.
......
......@@ -312,21 +312,20 @@ more menu type controls.
.. _enum_all_controls:
Example: Enumerating all user controls
======================================
Example: Enumerating all controls
=================================
.. code-block:: c
struct v4l2_queryctrl queryctrl;
struct v4l2_querymenu querymenu;
static void enumerate_menu(void)
static void enumerate_menu(__u32 id)
{
printf(" Menu items:\\n");
memset(&querymenu, 0, sizeof(querymenu));
querymenu.id = queryctrl.id;
querymenu.id = id;
for (querymenu.index = queryctrl.minimum;
querymenu.index <= queryctrl.maximum;
......@@ -337,6 +336,55 @@ Example: Enumerating all user controls
}
}
memset(&queryctrl, 0, sizeof(queryctrl));
queryctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
if (!(queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
printf("Control %s\\n", queryctrl.name);
if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
enumerate_menu(queryctrl.id);
}
queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
}
if (errno != EINVAL) {
perror("VIDIOC_QUERYCTRL");
exit(EXIT_FAILURE);
}
Example: Enumerating all controls including compound controls
=============================================================
.. code-block:: c
struct v4l2_query_ext_ctrl query_ext_ctrl;
memset(&query_ext_ctrl, 0, sizeof(query_ext_ctrl));
query_ext_ctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
while (0 == ioctl(fd, VIDIOC_QUERY_EXT_CTRL, &query_ext_ctrl)) {
if (!(query_ext_ctrl.flags & V4L2_CTRL_FLAG_DISABLED)) {
printf("Control %s\\n", query_ext_ctrl.name);
if (query_ext_ctrl.type == V4L2_CTRL_TYPE_MENU)
enumerate_menu(query_ext_ctrl.id);
}
query_ext_ctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
}
if (errno != EINVAL) {
perror("VIDIOC_QUERY_EXT_CTRL");
exit(EXIT_FAILURE);
}
Example: Enumerating all user controls (old style)
==================================================
.. code-block:: c
memset(&queryctrl, 0, sizeof(queryctrl));
for (queryctrl.id = V4L2_CID_BASE;
......@@ -349,7 +397,7 @@ Example: Enumerating all user controls
printf("Control %s\\n", queryctrl.name);
if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
enumerate_menu();
enumerate_menu(queryctrl.id);
} else {
if (errno == EINVAL)
continue;
......@@ -368,7 +416,7 @@ Example: Enumerating all user controls
printf("Control %s\\n", queryctrl.name);
if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
enumerate_menu();
enumerate_menu(queryctrl.id);
} else {
if (errno == EINVAL)
break;
......@@ -379,32 +427,6 @@ Example: Enumerating all user controls
}
Example: Enumerating all user controls (alternative)
====================================================
.. code-block:: c
memset(&queryctrl, 0, sizeof(queryctrl));
queryctrl.id = V4L2_CTRL_CLASS_USER | V4L2_CTRL_FLAG_NEXT_CTRL;
while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) {
if (V4L2_CTRL_ID2CLASS(queryctrl.id) != V4L2_CTRL_CLASS_USER)
break;
if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
continue;
printf("Control %s\\n", queryctrl.name);
if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
enumerate_menu();
queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
}
if (errno != EINVAL) {
perror("VIDIOC_QUERYCTRL");
exit(EXIT_FAILURE);
}
Example: Changing controls
==========================
......
......@@ -26,7 +26,7 @@ parameters
The MPEG controls actually support many more codecs than
just MPEG. See :ref:`mpeg-controls`.
Memory-to-memory devices can often be used as a shared resource: you can
Memory-to-memory devices function as a shared resource: you can
open the video node multiple times, each application setting up their
own codec properties that are local to the file handle, and each can use
it independently from the others. The driver will arbitrate access to
......
......@@ -2846,7 +2846,7 @@ JPEG Control IDs
input image is sampled, in respect to maximum sample rate in each
spatial dimension. See :ref:`itu-t81`, clause A.1.1. for more
details. The ``V4L2_CID_JPEG_CHROMA_SUBSAMPLING`` control determines
how Cb and Cr components are downsampled after coverting an input
how Cb and Cr components are downsampled after converting an input
image from RGB to Y'CbCr color space.
.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
......@@ -3017,6 +3017,10 @@ Image Process Control IDs
test pattern images. These hardware specific test patterns can be
used to test if a device is working properly.
``V4L2_CID_DEINTERLACING_MODE (menu)``
The video deinterlacing mode (such as Bob, Weave, ...). The menu items are
driver specific and are documented in :ref:`v4l-drivers`.
.. _dv-controls:
......
.. -*- coding: utf-8; mode: rst -*-
.. _hsv-formats:
***********
HSV Formats
***********
These formats store the color information of the image
in a geometrical representation. The colors are mapped into a
cylinder, where the angle is the HUE, the height is the VALUE
and the distance to the center is the SATURATION. This is a very
useful format for image segmentation algorithms.
.. toctree::
:maxdepth: 1
pixfmt-packed-hsv
......@@ -121,6 +121,11 @@ Single-planar format structure
- This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - enum :c:type:`v4l2_hsv_encoding`
- ``hsv_enc``
- This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - enum :c:type:`v4l2_quantization`
- ``quantization``
- This information supplements the ``colorspace`` and must be set by
......
......@@ -78,6 +78,11 @@ describing all planes of that format.
- This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - enum :c:type:`v4l2_hsv_encoding`
- ``hsv_enc``
- This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - enum :c:type:`v4l2_quantization`
- ``quantization``
- This information supplements the ``colorspace`` and must be set by
......
......@@ -19,9 +19,16 @@ colorspace field of struct :c:type:`v4l2_pix_format`
or struct :c:type:`v4l2_pix_format_mplane`
needs to be filled in.
.. note::
.. _hsv-colorspace:
The default R'G'B' quantization is full range for all
On :ref:`HSV formats <hsv-formats>` the *Hue* is defined as the angle on
the cylindrical color representation. Usually this angle is measured in
degrees, i.e. 0-360. When we map this angle value into 8 bits, there are
two basic ways to do it: Divide the angular value by 2 (0-179), or use the
whole range, 0-255, dividing the angular value by 1.41. The enum
:c:type:`v4l2_hsv_encoding` specifies which encoding is used.
.. note:: The default R'G'B' quantization is full range for all
colorspaces except for BT.2020 which uses limited range R'G'B'
quantization.
......@@ -123,6 +130,24 @@ needs to be filled in.
.. c:type:: v4l2_hsv_encoding
.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
.. flat-table:: V4L2 HSV Encodings
:header-rows: 1
:stub-columns: 0
* - Identifier
- Details
* - ``V4L2_HSV_ENC_180``
- For the Hue, each LSB is two degrees.
* - ``V4L2_HSV_ENC_256``
- For the Hue, the 360 degrees are mapped into 8 bits, i.e. each
LSB is roughly 1.41 degrees.
.. c:type:: v4l2_quantization
.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
......@@ -136,7 +161,7 @@ needs to be filled in.
* - ``V4L2_QUANTIZATION_DEFAULT``
- Use the default quantization encoding as defined by the
colorspace. This is always full range for R'G'B' (except for the
BT.2020 colorspace) and usually limited range for Y'CbCr.
BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
* - ``V4L2_QUANTIZATION_FULL_RANGE``
- Use the full range quantization encoding. I.e. the range [0…1] is
mapped to [0…255] (with possible clipping to [1…254] to avoid the
......
......@@ -85,3 +85,8 @@ Compressed Formats
- ``V4L2_PIX_FMT_VP8``
- 'VP80'
- VP8 video elementary stream.
* .. _V4L2-PIX-FMT-VP9:
- ``V4L2_PIX_FMT_VP9``
- 'VP90'
- VP9 video elementary stream.
.. -*- coding: utf-8; mode: rst -*-
.. _packed-hsv:
******************
Packed HSV formats
******************
Description
===========
The *hue* (h) is measured in degrees, the equivalence between degrees and LSBs
depends on the hsv-encoding used, see :ref:`colorspaces`.
The *saturation* (s) and the *value* (v) are measured in percentage of the
cylinder: 0 being the smallest value and 255 the maximum.
The values are packed in 24 or 32 bit formats.
.. raw:: latex
\newline\begin{adjustbox}{width=\columnwidth}
.. tabularcolumns:: |p{4.2cm}|p{1.0cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}|
.. _packed-hsv-formats:
.. flat-table:: Packed HSV Image Formats
:header-rows: 2
:stub-columns: 0
* - Identifier
- Code
-
- :cspan:`7` Byte 0 in memory
-
- :cspan:`7` Byte 1
-
- :cspan:`7` Byte 2
-
- :cspan:`7` Byte 3
* -
-
- Bit
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0
-
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0
-
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0
-
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0
* .. _V4L2-PIX-FMT-HSV32:
- ``V4L2_PIX_FMT_HSV32``
- 'HSV4'
-
-
-
-
-
-
-
-
-
-
- h\ :sub:`7`
- h\ :sub:`6`
- h\ :sub:`5`
- h\ :sub:`4`
- h\ :sub:`3`
- h\ :sub:`2`
- h\ :sub:`1`
- h\ :sub:`0`
-
- s\ :sub:`7`
- s\ :sub:`6`
- s\ :sub:`5`
- s\ :sub:`4`
- s\ :sub:`3`
- s\ :sub:`2`
- s\ :sub:`1`
- s\ :sub:`0`
-
- v\ :sub:`7`
- v\ :sub:`6`
- v\ :sub:`5`
- v\ :sub:`4`
- v\ :sub:`3`
- v\ :sub:`2`
- v\ :sub:`1`
- v\ :sub:`0`
* .. _V4L2-PIX-FMT-HSV24:
- ``V4L2_PIX_FMT_HSV24``
- 'HSV3'
-
- h\ :sub:`7`
- h\ :sub:`6`
- h\ :sub:`5`
- h\ :sub:`4`
- h\ :sub:`3`
- h\ :sub:`2`
- h\ :sub:`1`
- h\ :sub:`0`
-
- s\ :sub:`7`
- s\ :sub:`6`
- s\ :sub:`5`
- s\ :sub:`4`
- s\ :sub:`3`
- s\ :sub:`2`
- s\ :sub:`1`
- s\ :sub:`0`
-
- v\ :sub:`7`
- v\ :sub:`6`
- v\ :sub:`5`
- v\ :sub:`4`
- v\ :sub:`3`
- v\ :sub:`2`
- v\ :sub:`1`
- v\ :sub:`0`
-
-
.. raw:: latex
\end{adjustbox}\newline\newline
Bit 7 is the most significant bit.
......@@ -234,7 +234,15 @@ please make a proposal on the linux-media mailing list.
repeated for each line, i.e. the number of entries in the pointer
array. Anything what's in between the UYVY lines is JPEG data and
should be concatenated to form the JPEG stream.
* .. _V4L2-PIX-FMT-MT21C:
- ``V4L2_PIX_FMT_MT21C``
- 'MT21'
- Compressed two-planar YVU420 format used by Mediatek MT8173.
The compression is lossless.
It is an opaque intermediate format and the MDP hardware must be
used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``,
``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
......
......@@ -12,9 +12,9 @@ RGB Formats
pixfmt-packed-rgb
pixfmt-srggb8
pixfmt-sbggr16
pixfmt-srggb10
pixfmt-srggb10p
pixfmt-srggb10alaw8
pixfmt-srggb10dpcm8
pixfmt-srggb12
pixfmt-srggb16
......@@ -28,7 +28,7 @@ bits of each pixel, in the same order.
Each n-pixel row contains n/2 green samples and n/2 blue or red samples,
with alternating green-red and green-blue rows. They are conventionally
described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
of one of these formats:
of a small V4L2_PIX_FMT_SBGGR10P image:
**Byte Order.**
Each cell is one byte.
......
......@@ -26,7 +26,7 @@ high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes
are stored in memory in little endian order. They are conventionally
described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example
of one of these formats:
of a small V4L2_PIX_FMT_SBGGR12 image:
**Byte Order.**
Each cell is one byte, the 4 most significant bits in the high bytes are
......
.. -*- coding: utf-8; mode: rst -*-
.. _V4L2-PIX-FMT-SBGGR16:
.. _V4L2-PIX-FMT-SRGGB16:
.. _v4l2-pix-fmt-sbggr16:
.. _v4l2-pix-fmt-sgbrg16:
.. _v4l2-pix-fmt-sgrbg16:
*****************************
V4L2_PIX_FMT_SBGGR16 ('BYR2')
*****************************
Bayer RGB format
***************************************************************************************************************************
V4L2_PIX_FMT_SRGGB16 ('RG16'), V4L2_PIX_FMT_SGRBG16 ('GR16'), V4L2_PIX_FMT_SGBRG16 ('GB16'), V4L2_PIX_FMT_SBGGR16 ('BYR2'),
***************************************************************************************************************************
16-bit Bayer formats
Description
===========
This format is similar to
:ref:`V4L2_PIX_FMT_SBGGR8 <V4L2-PIX-FMT-SBGGR8>`, except each pixel
has a depth of 16 bits. The least significant byte is stored at lower
memory addresses (little-endian).
These four pixel formats are raw sRGB / Bayer formats with 16 bits per
sample. Each sample is stored in a 16-bit word. Each n-pixel row contains
n/2 green samples and n/2 blue or red samples, with alternating red and blue
rows. Bytes are stored in memory in little endian order. They are
conventionally described as GRGR... BGBG..., RGRG... GBGB..., etc. Below is
an example of a small V4L2_PIX_FMT_SBGGR16 image:
**Byte Order.**
Each cell is one byte.
......
......@@ -20,7 +20,7 @@ These four pixel formats are raw sRGB / Bayer formats with 8 bits per
sample. Each sample is stored in a byte. Each n-pixel row contains n/2
green samples and n/2 blue or red samples, with alternating red and
blue rows. They are conventionally described as GRGR... BGBG...,
RGRG... GBGB..., etc. Below is an example of one of these formats:
RGRG... GBGB..., etc. Below is an example of a small V4L2_PIX_FMT_SBGGR8 image:
**Byte Order.**
Each cell is one byte.
......
......@@ -29,6 +29,7 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.)
pixfmt-indexed
pixfmt-rgb
yuv-formats
hsv-formats
depth-formats
pixfmt-013
sdr-formats
......
......@@ -68,6 +68,10 @@ Authors, in alphabetical order:
- SDR API.
- Ribalda, Ricardo
- Introduce HSV formats and other minor changes.
- Rubli, Martin
- Designed and documented the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls.
......@@ -89,6 +93,11 @@ part can be used and distributed without restrictions.
Revision History
****************
:revision: 4.10 / 2016-07-15 (*rr*)
Introduce HSV formats.
:revision: 4.5 / 2015-10-29 (*rr*)
Extend VIDIOC_G_EXT_CTRLS;. Replace ctrl_class with a new union with
......
......@@ -270,3 +270,14 @@ EBUSY
- Some formats like SMPTE-125M have an interlaced signal with a odd
total height. For these formats, if this flag is set, the first
field has the extra line. Else, it is the second field.
* - ``V4L2_DV_FL_HAS_PICTURE_ASPECT``
- If set, then the picture_aspect field is valid. Otherwise assume that
the pixels are square, so the picture aspect ratio is the same as the
width to height ratio.
* - ``V4L2_DV_FL_HAS_CEA861_VIC``
- If set, then the cea861_vic field is valid and contains the Video
Identification Code as per the CEA-861 standard.
* - ``V4L2_DV_FL_HAS_HDMI_VIC``
- If set, then the hdmi_vic field is valid and contains the Video
Identification Code as per the HDMI standard (HDMI Vendor Specific
InfoFrame).
......@@ -201,10 +201,10 @@ To change the radio frequency the
* - ``V4L2_TUNER_SDR``
- 4
- Tuner controls the A/D and/or D/A block of a
Sofware Digital Radio (SDR)
Software Digital Radio (SDR)
* - ``V4L2_TUNER_RF``
- 5
- Tuner controls the RF part of a Sofware Digital Radio (SDR)
- Tuner controls the RF part of a Software Digital Radio (SDR)
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
......
AU0828 cards list
=================
.. code-block:: none
0 -> Unknown board (au0828)
1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008,2040:7260,2040:7213,2040:7270]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]
5 -> Hauppauge Woodbury (au0828) [05e1:0480,2040:8200]
=========== ========================== =======================================================================================================================
Card number Card name USB IDs
=========== ========================== =======================================================================================================================
0 Unknown board
1 Hauppauge HVR950Q 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270
2 Hauppauge HVR850 2040:7240
3 DViCO FusionHDTV USB 0fe9:d620
4 Hauppauge HVR950Q rev xxF8 2040:7201, 2040:7211, 2040:7281
5 Hauppauge Woodbury 05e1:0480, 2040:8200
=========== ========================== =======================================================================================================================
cx23885 cards list
==================
.. code-block:: none
0 -> UNKNOWN/GENERIC [0070:3400]
1 -> Hauppauge WinTV-HVR1800lp [0070:7600]
2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801,0070:7809]
3 -> Hauppauge WinTV-HVR1250 [0070:7911]
4 -> DViCO FusionHDTV5 Express [18ac:d500]
5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797]
6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3]
8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
10 -> DViCO FusionHDTV7 Dual Express [18ac:d618]
11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78]
12 -> Leadtek Winfast PxDVR3200 H [107d:6681]
13 -> Compro VideoMate E650F [185b:e800]
14 -> TurboSight TBS 6920 [6920:8888]
15 -> TeVii S470 [d470:9022]
16 -> DVBWorld DVB-S2 2005 [0001:2005]
17 -> NetUP Dual DVB-S2 CI [1b55:2a2c]
18 -> Hauppauge WinTV-HVR1270 [0070:2211]
19 -> Hauppauge WinTV-HVR1275 [0070:2215,0070:221d,0070:22f2]
20 -> Hauppauge WinTV-HVR1255 [0070:2251,0070:22f1]
21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5]
22 -> Mygica X8506 DMB-TH [14f1:8651]
23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657]
24 -> Hauppauge WinTV-HVR1850 [0070:8541]
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
28 -> LEADTEK WinFast PxTV1200 [107d:6f22]
29 -> GoTView X5 3D Hybrid [5654:2390]
30 -> NetUP Dual DVB-T/C-CI RF [1b55:e2e4]
31 -> Leadtek Winfast PxDVR3200 H XC4000 [107d:6f39]
32 -> MPX-885
33 -> Mygica X8502/X8507 ISDB-T [14f1:8502]
34 -> TerraTec Cinergy T PCIe Dual [153b:117e]
35 -> TeVii S471 [d471:9022]
36 -> Hauppauge WinTV-HVR1255 [0070:2259]
37 -> Prof Revolution DVB-S2 8000 [8000:3034]
38 -> Hauppauge WinTV-HVR4400/HVR5500 [0070:c108,0070:c138,0070:c1f8]
39 -> AVerTV Hybrid Express Slim HC81R [1461:d939]
40 -> TurboSight TBS 6981 [6981:8888]
41 -> TurboSight TBS 6980 [6980:8888]
42 -> Leadtek Winfast PxPVR2200 [107d:6f21]
43 -> Hauppauge ImpactVCB-e [0070:7133]
44 -> DViCO FusionHDTV DVB-T Dual Express2 [18ac:db98]
45 -> DVBSky T9580 [4254:9580]
46 -> DVBSky T980C [4254:980c]
47 -> DVBSky S950C [4254:950c]
48 -> Technotrend TT-budget CT2-4500 CI [13c2:3013]
49 -> DVBSky S950 [4254:0950]
50 -> DVBSky S952 [4254:0952]
51 -> DVBSky T982 [4254:0982]
52 -> Hauppauge WinTV-HVR5525 [0070:f038]
53 -> Hauppauge WinTV Starburst [0070:c12a]
54 -> ViewCast 260e [1576:0260]
55 -> ViewCast 460e [1576:0460]
56 -> Hauppauge WinTV-QuadHD-DVB [0070:6a28,0070:6b28]
57 -> Hauppauge WinTV-QuadHD-ATSC [0070:6a18,0070:6b18]
=========== ==================================== ======================================================================================
Card number Card name PCI IDs
=========== ==================================== ======================================================================================
0 UNKNOWN/GENERIC 0070:3400
1 Hauppauge WinTV-HVR1800lp 0070:7600
2 Hauppauge WinTV-HVR1800 0070:7800, 0070:7801, 0070:7809
3 Hauppauge WinTV-HVR1250 0070:7911
4 DViCO FusionHDTV5 Express 18ac:d500
5 Hauppauge WinTV-HVR1500Q 0070:7790, 0070:7797
6 Hauppauge WinTV-HVR1500 0070:7710, 0070:7717
7 Hauppauge WinTV-HVR1200 0070:71d1, 0070:71d3
8 Hauppauge WinTV-HVR1700 0070:8101
9 Hauppauge WinTV-HVR1400 0070:8010
10 DViCO FusionHDTV7 Dual Express 18ac:d618
11 DViCO FusionHDTV DVB-T Dual Express 18ac:db78
12 Leadtek Winfast PxDVR3200 H 107d:6681
13 Compro VideoMate E650F 185b:e800
14 TurboSight TBS 6920 6920:8888
15 TeVii S470 d470:9022
16 DVBWorld DVB-S2 2005 0001:2005
17 NetUP Dual DVB-S2 CI 1b55:2a2c
18 Hauppauge WinTV-HVR1270 0070:2211
19 Hauppauge WinTV-HVR1275 0070:2215, 0070:221d, 0070:22f2
20 Hauppauge WinTV-HVR1255 0070:2251, 0070:22f1
21 Hauppauge WinTV-HVR1210 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5
22 Mygica X8506 DMB-TH 14f1:8651
23 Magic-Pro ProHDTV Extreme 2 14f1:8657
24 Hauppauge WinTV-HVR1850 0070:8541
25 Compro VideoMate E800 1858:e800
26 Hauppauge WinTV-HVR1290 0070:8551
27 Mygica X8558 PRO DMB-TH 14f1:8578
28 LEADTEK WinFast PxTV1200 107d:6f22
29 GoTView X5 3D Hybrid 5654:2390
30 NetUP Dual DVB-T/C-CI RF 1b55:e2e4
31 Leadtek Winfast PxDVR3200 H XC4000 107d:6f39
32 MPX-885
33 Mygica X8502/X8507 ISDB-T 14f1:8502
34 TerraTec Cinergy T PCIe Dual 153b:117e
35 TeVii S471 d471:9022
36 Hauppauge WinTV-HVR1255 0070:2259
37 Prof Revolution DVB-S2 8000 8000:3034
38 Hauppauge WinTV-HVR4400/HVR5500 0070:c108, 0070:c138, 0070:c1f8
39 AVerTV Hybrid Express Slim HC81R 1461:d939
40 TurboSight TBS 6981 6981:8888
41 TurboSight TBS 6980 6980:8888
42 Leadtek Winfast PxPVR2200 107d:6f21
43 Hauppauge ImpactVCB-e 0070:7133
44 DViCO FusionHDTV DVB-T Dual Express2 18ac:db98
45 DVBSky T9580 4254:9580
46 DVBSky T980C 4254:980c
47 DVBSky S950C 4254:950c
48 Technotrend TT-budget CT2-4500 CI 13c2:3013
49 DVBSky S950 4254:0950
50 DVBSky S952 4254:0952
51 DVBSky T982 4254:0982
52 Hauppauge WinTV-HVR5525 0070:f038
53 Hauppauge WinTV Starburst 0070:c12a
54 ViewCast 260e 1576:0260
55 ViewCast 460e 1576:0460
56 Hauppauge WinTV-QuadHD-DVB 0070:6a28, 0070:6b28
57 Hauppauge WinTV-QuadHD-ATSC 0070:6a18, 0070:6b18
=========== ==================================== ======================================================================================
......@@ -2,6 +2,8 @@
.. include:: <isonum.txt>
.. _v4l-drivers:
################################################
Video4Linux (V4L) driver-specific documentation
################################################
......@@ -46,6 +48,7 @@ For more details see the file COPYING in the source distribution of Linux.
pvrusb2
pxa_camera
radiotrack
rcar-fdp1
saa7134
sh_mobile_ceu_camera
si470x
......
Renesas R-Car Fine Display Processor (FDP1) Driver
==================================================
The R-Car FDP1 driver implements driver-specific controls as follows.
``V4L2_CID_DEINTERLACING_MODE (menu)``
The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1
driver implements the following modes.
.. flat-table::
:header-rows: 0
:stub-columns: 0
:widths: 1 4
* - ``"Progressive" (0)``
- The input image video stream is progressive (not interlaced). No
deinterlacing is performed. Apart from (optional) format and encoding
conversion output frames are identical to the input frames.
* - ``"Adaptive 2D/3D" (1)``
- Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing
in the presence of fast motion and 2D deinterlacing with diagonal
interpolation otherwise.
* - ``"Fixed 2D" (2)``
- The current field is scaled vertically by averaging adjacent lines to
recover missing lines. This method is also known as blending or Line
Averaging (LAV).
* - ``"Fixed 3D" (3)``
- The previous and next fields are averaged to recover lines missing from
the current field. This method is also known as Field Averaging (FAV).
* - ``"Previous field" (4)``
- The current field is weaved with the previous field, i.e. the previous
field is used to fill missing lines from the current field. This method
is also known as weave deinterlacing.
* - ``"Next field" (5)``
- The current field is weaved with the next field, i.e. the next field is
used to fill missing lines from the current field. This method is also
known as weave deinterlacing.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -6,6 +6,10 @@ ifeq ($(CONFIG_MEDIA_CEC_EDID),y)
obj-$(CONFIG_MEDIA_SUPPORT) += cec-edid.o
endif
ifeq ($(CONFIG_MEDIA_CEC_SUPPORT),y)
obj-$(CONFIG_MEDIA_SUPPORT) += cec/
endif
media-objs := media-device.o media-devnode.o media-entity.o
#
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment