net/mlx5: Bridge, Enable mcast in smfs steering mode

In order to have mcast offloads the driver needs the following:
It should know if that mcast comes from wire port, in addition the flow
should not be marked as any specific source, that way it will give the
flexibility for the driver not to be depended on the way iterator
implemented in the FW.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/esw/bridge_mcast.c

@@ -78,6 +78,8 @@ mlx5_esw_bridge_mdb_flow_create(u16 esw_owner_vhca_id, struct mlx5_esw_bridge_md
 	xa_for_each(&entry->ports, idx, port) {
 		dests[i].type = MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE;
 		dests[i].ft = port->mcast.ft;
+		if (port->vport_num == MLX5_VPORT_UPLINK)
+			dests[i].ft->flags |= MLX5_FLOW_TABLE_UPLINK_VPORT;
 		i++;
 	}
 
@@ -585,10 +587,6 @@ mlx5_esw_bridge_mcast_vlan_flow_create(u16 vlan_proto, struct mlx5_esw_bridge_po
 	if (!rule_spec)
 		return ERR_PTR(-ENOMEM);
 
-	if (MLX5_CAP_ESW_FLOWTABLE(bridge->br_offloads->esw->dev, flow_source) &&
-	    port->vport_num == MLX5_VPORT_UPLINK)
-		rule_spec->flow_context.flow_source =
-			MLX5_FLOW_CONTEXT_FLOW_SOURCE_LOCAL_VPORT;
 	rule_spec->match_criteria_enable = MLX5_MATCH_OUTER_HEADERS;
 
 	flow_act.action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
@@ -660,11 +658,6 @@ mlx5_esw_bridge_mcast_fwd_flow_create(struct mlx5_esw_bridge_port *port)
 	if (!rule_spec)
 		return ERR_PTR(-ENOMEM);
 
-	if (MLX5_CAP_ESW_FLOWTABLE(bridge->br_offloads->esw->dev, flow_source) &&
-	    port->vport_num == MLX5_VPORT_UPLINK)
-		rule_spec->flow_context.flow_source =
-			MLX5_FLOW_CONTEXT_FLOW_SOURCE_LOCAL_VPORT;
-
 	if (MLX5_CAP_ESW(bridge->br_offloads->esw->dev, merged_eswitch)) {
 		dest.vport.flags = MLX5_FLOW_DEST_VPORT_VHCA_ID;
 		dest.vport.vhca_id = port->esw_owner_vhca_id;

include/linux/mlx5/fs.h

@@ -67,6 +67,7 @@ enum {
 	MLX5_FLOW_TABLE_TERMINATION = BIT(2),
 	MLX5_FLOW_TABLE_UNMANAGED = BIT(3),
 	MLX5_FLOW_TABLE_OTHER_VPORT = BIT(4),
+	MLX5_FLOW_TABLE_UPLINK_VPORT = BIT(5),
 };
 
 #define LEFTOVERS_RULE_NUM	 2