net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable

This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD`
phy-tunable feature.
EDPD is also enabled by default on PHY config_init, but can be disabled via
the phy-tunable control.

When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX
periodic pulses, so that in case the other PHY is also on EDPD mode, there
is no lock-up situation where both sides are waiting for the other to
transmit.

Via the phy-tunable control, TX pulses can be disabled if specifying 0
`tx-interval` via ethtool.

The ADIN PHY supports only fixed 1 second intervals; they cannot be
configured. That is why the acceptable values are 1,
ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables
TX pulses).
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/adin.c

@@ -26,6 +26,11 @@
 
 #define ADIN1300_RX_ERR_CNT			0x0014
 
+#define ADIN1300_PHY_CTRL_STATUS2		0x0015
+#define   ADIN1300_NRG_PD_EN			BIT(3)
+#define   ADIN1300_NRG_PD_TX_EN			BIT(2)
+#define   ADIN1300_NRG_PD_STATUS		BIT(1)
+
 #define ADIN1300_PHY_CTRL2			0x0016
 #define   ADIN1300_DOWNSPEED_AN_100_EN		BIT(11)
 #define   ADIN1300_DOWNSPEED_AN_10_EN		BIT(10)
@@ -328,12 +333,62 @@ static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
 			    ADIN1300_DOWNSPEEDS_EN);
 }
 
+static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval)
+{
+	int val;
+
+	val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2);
+	if (val < 0)
+		return val;
+
+	if (ADIN1300_NRG_PD_EN & val) {
+		if (val & ADIN1300_NRG_PD_TX_EN)
+			/* default is 1 second */
+			*tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
+		else
+			*tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
+	} else {
+		*tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+	}
+
+	return 0;
+}
+
+static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
+{
+	u16 val;
+
+	if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
+		return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
+				(ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
+
+	val = ADIN1300_NRG_PD_EN;
+
+	switch (tx_interval) {
+	case 1000: /* 1 second */
+		/* fallthrough */
+	case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+		val |= ADIN1300_NRG_PD_TX_EN;
+		/* fallthrough */
+	case ETHTOOL_PHY_EDPD_NO_TX:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2,
+			  (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN),
+			  val);
+}
+
 static int adin_get_tunable(struct phy_device *phydev,
 			    struct ethtool_tunable *tuna, void *data)
 {
 	switch (tuna->id) {
 	case ETHTOOL_PHY_DOWNSHIFT:
 		return adin_get_downshift(phydev, data);
+	case ETHTOOL_PHY_EDPD:
+		return adin_get_edpd(phydev, data);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -345,6 +400,8 @@ static int adin_set_tunable(struct phy_device *phydev,
 	switch (tuna->id) {
 	case ETHTOOL_PHY_DOWNSHIFT:
 		return adin_set_downshift(phydev, *(const u8 *)data);
+	case ETHTOOL_PHY_EDPD:
+		return adin_set_edpd(phydev, *(const u16 *)data);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -368,6 +425,10 @@ static int adin_config_init(struct phy_device *phydev)
 	if (rc < 0)
 		return rc;
 
+	rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+	if (rc < 0)
+		return rc;
+
 	phydev_dbg(phydev, "PHY is using mode '%s'\n",
 		   phy_modes(phydev->interface));