Commit 6682bd4d authored by Jerome Brunet's avatar Jerome Brunet Committed by Neil Armstrong

clk: meson: factorise meson64 peripheral clock controller drivers

The function used to probe the peripheral clock controller of the arm64
amlogic SoCs is mostly the same. We now have 3 of those controllers so
it is time to factorize things a bit.
Signed-off-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
parent 085a4ea9
......@@ -35,6 +35,11 @@ config COMMON_CLK_MESON_AO_CLKC
select COMMON_CLK_MESON_INPUT
select RESET_CONTROLLER
config COMMON_CLK_MESON_EE_CLKC
tristate
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_INPUT
config COMMON_CLK_MESON8B
bool
depends on ARCH_MESON
......@@ -51,13 +56,13 @@ config COMMON_CLK_MESON8B
config COMMON_CLK_GXBB
bool
depends on ARCH_MESON
select COMMON_CLK_MESON_INPUT
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_DUALDIV
select COMMON_CLK_MESON_VID_PLL_DIV
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select COMMON_CLK_MESON_AO_CLKC
select COMMON_CLK_MESON_EE_CLKC
select MFD_SYSCON
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
......@@ -66,12 +71,12 @@ config COMMON_CLK_GXBB
config COMMON_CLK_AXG
bool
depends on ARCH_MESON
select COMMON_CLK_MESON_INPUT
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_DUALDIV
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select COMMON_CLK_MESON_AO_CLKC
select COMMON_CLK_MESON_EE_CLKC
select MFD_SYSCON
help
Support for the clock controller on AmLogic A113D devices, aka axg.
......@@ -92,10 +97,10 @@ config COMMON_CLK_AXG_AUDIO
config COMMON_CLK_G12A
bool
depends on ARCH_MESON
select COMMON_CLK_MESON_INPUT
select COMMON_CLK_MESON_REGMAP
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
select COMMON_CLK_MESON_EE_CLKC
select MFD_SYSCON
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
......
......@@ -2,6 +2,7 @@
obj-$(CONFIG_COMMON_CLK_MESON_AO_CLKC) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON_DUALDIV) += clk-dualdiv.o
obj-$(CONFIG_COMMON_CLK_MESON_EE_CLKC) += meson-eeclk.o
obj-$(CONFIG_COMMON_CLK_MESON_INPUT) += clk-input.o
obj-$(CONFIG_COMMON_CLK_MESON_MPLL) += clk-mpll.o
obj-$(CONFIG_COMMON_CLK_MESON_PHASE) += clk-phase.o
......
......@@ -9,21 +9,17 @@
* Author: Qiufang Dai <qiufang.dai@amlogic.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "clk-input.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-mpll.h"
#include "axg.h"
#define IN_PREFIX "ee-in-"
#include "meson-eeclk.h"
static DEFINE_SPINLOCK(meson_clk_lock);
......@@ -1260,55 +1256,20 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
&axg_pcie_pll_od,
};
static const struct meson_eeclkc_data axg_clkc_data = {
.regmap_clks = axg_clk_regmaps,
.regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps),
.hw_onecell_data = &axg_hw_onecell_data,
};
static const struct of_device_id clkc_match_table[] = {
{ .compatible = "amlogic,axg-clkc" },
{ .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
{}
};
static int axg_clkc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct clk_hw *input;
struct regmap *map;
int ret, i;
/* Get the hhi system controller node if available */
map = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(map)) {
dev_err(dev, "failed to get HHI regmap\n");
return PTR_ERR(map);
}
input = meson_clk_hw_register_input(dev, "xtal", IN_PREFIX "xtal", 0);
if (IS_ERR(input)) {
ret = PTR_ERR(input);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get input clock");
return ret;
}
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(axg_clk_regmaps); i++)
axg_clk_regmaps[i]->map = map;
for (i = 0; i < axg_hw_onecell_data.num; i++) {
/* array might be sparse */
if (!axg_hw_onecell_data.hws[i])
continue;
ret = devm_clk_hw_register(dev, axg_hw_onecell_data.hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
}
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&axg_hw_onecell_data);
}
static struct platform_driver axg_driver = {
.probe = axg_clkc_probe,
.probe = meson_eeclkc_probe,
.driver = {
.name = "axg-clkc",
.of_match_table = clkc_match_table,
......
......@@ -13,19 +13,16 @@
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "clk-input.h"
#include "clk-mpll.h"
#include "clk-pll.h"
#include "clk-regmap.h"
#include "vid-pll-div.h"
#include "meson-eeclk.h"
#include "g12a.h"
#define IN_PREFIX "ee-in-"
static DEFINE_SPINLOCK(meson_clk_lock);
static struct clk_regmap g12a_fixed_pll_dco = {
......@@ -2340,56 +2337,19 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_mpll_50m,
};
static const struct meson_eeclkc_data g12a_clkc_data = {
.regmap_clks = g12a_clk_regmaps,
.regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
.hw_onecell_data = &g12a_hw_onecell_data
};
static const struct of_device_id clkc_match_table[] = {
{ .compatible = "amlogic,g12a-clkc" },
{ .compatible = "amlogic,g12a-clkc", .data = &g12a_clkc_data },
{}
};
static int g12a_clkc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct clk_hw *input;
struct regmap *map;
int ret, i;
/* Get the hhi system controller node */
map = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(map)) {
dev_err(dev,
"failed to get HHI regmap\n");
return PTR_ERR(map);
}
input = meson_clk_hw_register_input(dev, "xtal", IN_PREFIX "xtal", 0);
if (IS_ERR(input)) {
ret = PTR_ERR(input);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get input clock");
return ret;
}
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
g12a_clk_regmaps[i]->map = map;
for (i = 0; i < g12a_hw_onecell_data.num; i++) {
/* array might be sparse */
if (!g12a_hw_onecell_data.hws[i])
continue;
ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
}
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&g12a_hw_onecell_data);
}
static struct platform_driver g12a_driver = {
.probe = g12a_clkc_probe,
.probe = meson_eeclkc_probe,
.driver = {
.name = "g12a-clkc",
.of_match_table = clkc_match_table,
......
......@@ -4,19 +4,17 @@
* Michael Turquette <mturquette@baylibre.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "gxbb.h"
#include "clk-input.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-mpll.h"
#include "meson-eeclk.h"
#include "vid-pll-div.h"
#define IN_PREFIX "ee-in-"
......@@ -2859,6 +2857,192 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
};
static struct clk_regmap *const gxbb_clk_regmaps[] = {
&gxbb_clk81,
&gxbb_ddr,
&gxbb_dos,
&gxbb_isa,
&gxbb_pl301,
&gxbb_periphs,
&gxbb_spicc,
&gxbb_i2c,
&gxbb_sar_adc,
&gxbb_smart_card,
&gxbb_rng0,
&gxbb_uart0,
&gxbb_sdhc,
&gxbb_stream,
&gxbb_async_fifo,
&gxbb_sdio,
&gxbb_abuf,
&gxbb_hiu_iface,
&gxbb_assist_misc,
&gxbb_spi,
&gxbb_i2s_spdif,
&gxbb_eth,
&gxbb_demux,
&gxbb_aiu_glue,
&gxbb_iec958,
&gxbb_i2s_out,
&gxbb_amclk,
&gxbb_aififo2,
&gxbb_mixer,
&gxbb_mixer_iface,
&gxbb_adc,
&gxbb_blkmv,
&gxbb_aiu,
&gxbb_uart1,
&gxbb_g2d,
&gxbb_usb0,
&gxbb_usb1,
&gxbb_reset,
&gxbb_nand,
&gxbb_dos_parser,
&gxbb_usb,
&gxbb_vdin1,
&gxbb_ahb_arb0,
&gxbb_efuse,
&gxbb_boot_rom,
&gxbb_ahb_data_bus,
&gxbb_ahb_ctrl_bus,
&gxbb_hdmi_intr_sync,
&gxbb_hdmi_pclk,
&gxbb_usb1_ddr_bridge,
&gxbb_usb0_ddr_bridge,
&gxbb_mmc_pclk,
&gxbb_dvin,
&gxbb_uart2,
&gxbb_sana,
&gxbb_vpu_intr,
&gxbb_sec_ahb_ahb3_bridge,
&gxbb_clk81_a53,
&gxbb_vclk2_venci0,
&gxbb_vclk2_venci1,
&gxbb_vclk2_vencp0,
&gxbb_vclk2_vencp1,
&gxbb_gclk_venci_int0,
&gxbb_gclk_vencp_int,
&gxbb_dac_clk,
&gxbb_aoclk_gate,
&gxbb_iec958_gate,
&gxbb_enc480p,
&gxbb_rng1,
&gxbb_gclk_venci_int1,
&gxbb_vclk2_venclmcc,
&gxbb_vclk2_vencl,
&gxbb_vclk_other,
&gxbb_edp,
&gxbb_ao_media_cpu,
&gxbb_ao_ahb_sram,
&gxbb_ao_ahb_bus,
&gxbb_ao_iface,
&gxbb_ao_i2c,
&gxbb_emmc_a,
&gxbb_emmc_b,
&gxbb_emmc_c,
&gxbb_sar_adc_clk,
&gxbb_mali_0,
&gxbb_mali_1,
&gxbb_cts_amclk,
&gxbb_cts_mclk_i958,
&gxbb_32k_clk,
&gxbb_sd_emmc_a_clk0,
&gxbb_sd_emmc_b_clk0,
&gxbb_sd_emmc_c_clk0,
&gxbb_vpu_0,
&gxbb_vpu_1,
&gxbb_vapb_0,
&gxbb_vapb_1,
&gxbb_vapb,
&gxbb_mpeg_clk_div,
&gxbb_sar_adc_clk_div,
&gxbb_mali_0_div,
&gxbb_mali_1_div,
&gxbb_cts_mclk_i958_div,
&gxbb_32k_clk_div,
&gxbb_sd_emmc_a_clk0_div,
&gxbb_sd_emmc_b_clk0_div,
&gxbb_sd_emmc_c_clk0_div,
&gxbb_vpu_0_div,
&gxbb_vpu_1_div,
&gxbb_vapb_0_div,
&gxbb_vapb_1_div,
&gxbb_mpeg_clk_sel,
&gxbb_sar_adc_clk_sel,
&gxbb_mali_0_sel,
&gxbb_mali_1_sel,
&gxbb_mali,
&gxbb_cts_amclk_sel,
&gxbb_cts_mclk_i958_sel,
&gxbb_cts_i958,
&gxbb_32k_clk_sel,
&gxbb_sd_emmc_a_clk0_sel,
&gxbb_sd_emmc_b_clk0_sel,
&gxbb_sd_emmc_c_clk0_sel,
&gxbb_vpu_0_sel,
&gxbb_vpu_1_sel,
&gxbb_vpu,
&gxbb_vapb_0_sel,
&gxbb_vapb_1_sel,
&gxbb_vapb_sel,
&gxbb_mpll0,
&gxbb_mpll1,
&gxbb_mpll2,
&gxbb_mpll0_div,
&gxbb_mpll1_div,
&gxbb_mpll2_div,
&gxbb_cts_amclk_div,
&gxbb_fixed_pll,
&gxbb_sys_pll,
&gxbb_mpll_prediv,
&gxbb_fclk_div2,
&gxbb_fclk_div3,
&gxbb_fclk_div4,
&gxbb_fclk_div5,
&gxbb_fclk_div7,
&gxbb_vdec_1_sel,
&gxbb_vdec_1_div,
&gxbb_vdec_1,
&gxbb_vdec_hevc_sel,
&gxbb_vdec_hevc_div,
&gxbb_vdec_hevc,
&gxbb_gen_clk_sel,
&gxbb_gen_clk_div,
&gxbb_gen_clk,
&gxbb_fixed_pll_dco,
&gxbb_sys_pll_dco,
&gxbb_gp0_pll,
&gxbb_vid_pll,
&gxbb_vid_pll_sel,
&gxbb_vid_pll_div,
&gxbb_vclk,
&gxbb_vclk_sel,
&gxbb_vclk_div,
&gxbb_vclk_input,
&gxbb_vclk_div1,
&gxbb_vclk_div2_en,
&gxbb_vclk_div4_en,
&gxbb_vclk_div6_en,
&gxbb_vclk_div12_en,
&gxbb_vclk2,
&gxbb_vclk2_sel,
&gxbb_vclk2_div,
&gxbb_vclk2_input,
&gxbb_vclk2_div1,
&gxbb_vclk2_div2_en,
&gxbb_vclk2_div4_en,
&gxbb_vclk2_div6_en,
&gxbb_vclk2_div12_en,
&gxbb_cts_enci,
&gxbb_cts_enci_sel,
&gxbb_cts_encp,
&gxbb_cts_encp_sel,
&gxbb_cts_vdac,
&gxbb_cts_vdac_sel,
&gxbb_hdmi_tx,
&gxbb_hdmi_tx_sel,
&gxbb_hdmi_sel,
&gxbb_hdmi_div,
&gxbb_hdmi,
&gxbb_gp0_pll_dco,
&gxbb_hdmi_pll,
&gxbb_hdmi_pll_od,
......@@ -2867,14 +3051,6 @@ static struct clk_regmap *const gxbb_clk_regmaps[] = {
};
static struct clk_regmap *const gxl_clk_regmaps[] = {
&gxl_gp0_pll_dco,
&gxl_hdmi_pll,
&gxl_hdmi_pll_od,
&gxl_hdmi_pll_od2,
&gxl_hdmi_pll_dco,
};
static struct clk_regmap *const gx_clk_regmaps[] = {
&gxbb_clk81,
&gxbb_ddr,
&gxbb_dos,
......@@ -3061,23 +3237,22 @@ static struct clk_regmap *const gx_clk_regmaps[] = {
&gxbb_hdmi_sel,
&gxbb_hdmi_div,
&gxbb_hdmi,
&gxl_gp0_pll_dco,
&gxl_hdmi_pll,
&gxl_hdmi_pll_od,
&gxl_hdmi_pll_od2,
&gxl_hdmi_pll_dco,
};
struct clkc_data {
struct clk_regmap *const *regmap_clks;
unsigned int regmap_clks_count;
struct clk_hw_onecell_data *hw_onecell_data;
};
static const struct clkc_data gxbb_clkc_data = {
static const struct meson_eeclkc_data gxbb_clkc_data = {
.regmap_clks = gxbb_clk_regmaps,
.regmap_clks_count = ARRAY_SIZE(gxbb_clk_regmaps),
.regmap_clk_num = ARRAY_SIZE(gxbb_clk_regmaps),
.hw_onecell_data = &gxbb_hw_onecell_data,
};
static const struct clkc_data gxl_clkc_data = {
static const struct meson_eeclkc_data gxl_clkc_data = {
.regmap_clks = gxl_clk_regmaps,
.regmap_clks_count = ARRAY_SIZE(gxl_clk_regmaps),
.regmap_clk_num = ARRAY_SIZE(gxl_clk_regmaps),
.hw_onecell_data = &gxl_hw_onecell_data,
};
......@@ -3087,61 +3262,8 @@ static const struct of_device_id clkc_match_table[] = {
{},
};
static int gxbb_clkc_probe(struct platform_device *pdev)
{
const struct clkc_data *clkc_data;
struct clk_hw *input;
struct regmap *map;
int ret, i;
struct device *dev = &pdev->dev;
clkc_data = of_device_get_match_data(dev);
if (!clkc_data)
return -EINVAL;
/* Get the hhi system controller node if available */
map = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(map)) {
dev_err(dev, "failed to get HHI regmap\n");
return PTR_ERR(map);
}
input = meson_clk_hw_register_input(dev, "xtal", IN_PREFIX "xtal", 0);
if (IS_ERR(input)) {
ret = PTR_ERR(input);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get input clock");
return ret;
}
/* Populate regmap for the common regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(gx_clk_regmaps); i++)
gx_clk_regmaps[i]->map = map;
/* Populate regmap for soc specific clocks */
for (i = 0; i < clkc_data->regmap_clks_count; i++)
clkc_data->regmap_clks[i]->map = map;
/* Register all clks */
for (i = 0; i < clkc_data->hw_onecell_data->num; i++) {
/* array might be sparse */
if (!clkc_data->hw_onecell_data->hws[i])
continue;
ret = devm_clk_hw_register(dev,
clkc_data->hw_onecell_data->hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
}
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
clkc_data->hw_onecell_data);
}
static struct platform_driver gxbb_driver = {
.probe = gxbb_clkc_probe,
.probe = meson_eeclkc_probe,
.driver = {
.name = "gxbb-clkc",
.of_match_table = clkc_match_table,
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 BayLibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#include <linux/clk-provider.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "clk-input.h"
#include "clk-regmap.h"
#include "meson-eeclk.h"
int meson_eeclkc_probe(struct platform_device *pdev)
{
const struct meson_eeclkc_data *data;
struct device *dev = &pdev->dev;
struct clk_hw *input;
struct regmap *map;
int ret, i;
data = of_device_get_match_data(dev);
if (!data)
return -EINVAL;
/* Get the hhi system controller node */
map = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(map)) {
dev_err(dev,
"failed to get HHI regmap\n");
return PTR_ERR(map);
}
input = meson_clk_hw_register_input(dev, "xtal", IN_PREFIX "xtal", 0);
if (IS_ERR(input)) {
ret = PTR_ERR(input);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get input clock");
return ret;
}
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < data->regmap_clk_num; i++)
data->regmap_clks[i]->map = map;
for (i = 0; i < data->hw_onecell_data->num; i++) {
/* array might be sparse */
if (!data->hw_onecell_data->hws[i])
continue;
ret = devm_clk_hw_register(dev, data->hw_onecell_data->hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
}
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
data->hw_onecell_data);
}
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2019 BayLibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#ifndef __MESON_CLKC_H
#define __MESON_CLKC_H
#include <linux/clk-provider.h>
#include "clk-regmap.h"
#define IN_PREFIX "ee-in-"
struct platform_device;
struct meson_eeclkc_data {
struct clk_regmap *const *regmap_clks;
unsigned int regmap_clk_num;
struct clk_hw_onecell_data *hw_onecell_data;
};
int meson_eeclkc_probe(struct platform_device *pdev);
#endif /* __MESON_CLKC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment