Commit 67f43086 authored by Shawn Guo's avatar Shawn Guo Committed by Sascha Hauer

ARM: mxs: add ocotp read function

Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent bb58b3e8
...@@ -2,6 +2,9 @@ if ARCH_MXS ...@@ -2,6 +2,9 @@ if ARCH_MXS
source "arch/arm/mach-mxs/devices/Kconfig" source "arch/arm/mach-mxs/devices/Kconfig"
config MXS_OCOTP
bool
config SOC_IMX23 config SOC_IMX23
bool bool
select CPU_ARM926T select CPU_ARM926T
...@@ -26,6 +29,7 @@ config MACH_MX28EVK ...@@ -26,6 +29,7 @@ config MACH_MX28EVK
select SOC_IMX28 select SOC_IMX28
select MXS_HAVE_AMBA_DUART select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_FEC
select MXS_OCOTP
default y default y
help help
Include support for MX28EVK platform. This includes specific Include support for MX28EVK platform. This includes specific
......
# Common support # Common support
obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
struct clk; struct clk;
extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *); extern int mxs_reset_block(void __iomem *);
extern void mxs_timer_init(struct clk *, int); extern void mxs_timer_init(struct clk *, int);
......
/*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20
#define BM_OCOTP_CTRL_BUSY (1 << 8)
#define BM_OCOTP_CTRL_ERROR (1 << 9)
#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
static DEFINE_MUTEX(ocotp_mutex);
static u32 ocotp_words[OCOTP_WORD_COUNT];
const u32 *mxs_get_ocotp(void)
{
void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
int timeout = 0x400;
size_t i;
static int once = 0;
if (once)
return ocotp_words;
mutex_lock(&ocotp_mutex);
/*
* clk_enable(hbus_clk) for ocotp can be skipped
* as it must be on when system is running.
*/
/* try to clear ERROR bit */
__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
/* check both BUSY and ERROR cleared */
while ((__raw_readl(ocotp_base) &
(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
/* open OCOTP banks for read */
__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
/* approximately wait 32 hclk cycles */
udelay(1);
/* poll BUSY bit becoming cleared */
timeout = 0x400;
while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
cpu_relax();
if (unlikely(!timeout))
goto error_unlock;
for (i = 0; i < OCOTP_WORD_COUNT; i++)
ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
i * 0x10);
/* close banks for power saving */
__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
once = 1;
mutex_unlock(&ocotp_mutex);
return ocotp_words;
error_unlock:
mutex_unlock(&ocotp_mutex);
pr_err("%s: timeout in reading OCOTP\n", __func__);
return NULL;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment