Skip to content

L
linux
Commit 681d855f authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'sunxi-dt-for-6.10-1' of... 

Merge tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1

* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h616: Add NMI device node
  arm64: dts: allwinner: Add Tanix TX1 support
  dt-bindings: arm: sunxi: document Tanix TX1 name
  ARM: dts: sun5i: Add PocketBook 614 Plus support
  dt-bindings: arm: sunxi: Add PocketBook 614 Plus
  arm64: dts: allwinner: h616: Fix I2C0 pins
  arm64: dts: allwinner: a64: Run GPU at 432 MHz
  arm: dts: allwinner: drop underscore in node names
  arm64: dts: allwinner: Orange Pi: delete node by phandle
  arm64: dts: allwinner: drop underscore in node names
  arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
  arm64: dts: allwinner: pinephone: add multicolor LED node
  arm64: dts: allwinner: pinephone: Retain LEDs state in suspend

Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptopSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 2173e547 fd46e5e1
Hide whitespace changes
Inline Side-by-side
Showing with 553 additions and 128 deletions
Documentation/devicetree/bindings/arm/sunxi.yaml
View file @ 681d855f
......@@ -774,6 +774,11 @@ properties:
- const: pocketbook,touch-lux-3
- const: allwinner,sun5i-a13
- description: PocketBook 614 Plus
items:
- const: pocketbook,614-plus
- const: allwinner,sun5i-a13
- description: Point of View Protab2-IPS9
items:
- const: pov,protab2-ips9
......@@ -860,6 +865,11 @@ properties:
- const: allwinner,sl631
- const: allwinner,sun8i-v3
- description: Tanix TX1
items:
- const: oranth,tanix-tx1
- const: allwinner,sun50i-h616
- description: Tanix TX6
items:
- const: oranth,tanix-tx6
......
arch/arm/boot/dts/allwinner/Makefile
View file @ 681d855f
......@@ -61,6 +61,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-pocketbook-touch-lux-3.dtb \
sun5i-a13-pocketbook-614-plus.dtb \
sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb \
sun5i-gr8-chip-pro.dtb \
......
arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts 0 → 100644
View file @ 681d855f
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2024 Denis Burkov <hitechshell@mail.ru>
*/
/dts-v1/;
#include "sun5i-a13.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
/ {
model = "PocketBook 614 Plus";
compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
aliases {
serial0 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_POWER;
linux,default-trigger = "default-on";
gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
};
};
gpio-keys {
compatible = "gpio-keys";
key-0 {
label = "Right";
linux,code = <KEY_NEXT>;
gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
};
key-1 {
label = "Left";
linux,code = <KEY_PREVIOUS>;
gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
};
reg_3v3_mmc0: regulator-mmc0 {
compatible = "regulator-fixed";
regulator-name = "vdd-mmc0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
vin-supply = <&reg_vcc3v3>;
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
status = "okay";
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
#clock-cells = <0>;
};
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button-300 {
label = "Down";
linux,code = <KEY_DOWN>;
channel = <0>;
voltage = <300000>;
};
button-700 {
label = "Up";
linux,code = <KEY_UP>;
channel = <0>;
voltage = <700000>;
};
button-1000 {
label = "Left";
linux,code = <KEY_LEFT>;
channel = <0>;
voltage = <1000000>;
};
button-1200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <1200000>;
};
button-1500 {
label = "Right";
linux,code = <KEY_RIGHT>;
channel = <0>;
voltage = <1500000>;
};
};
&mmc0 {
vmmc-supply = <&reg_3v3_mmc0>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pc_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};
&reg_usb1_vbus {
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
View file @ 681d855f
......@@ -62,14 +62,14 @@ map0 {
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
......
arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
View file @ 681d855f
......@@ -77,7 +77,7 @@ led-0 {
};
};
mmc0_pwrseq: mmc0_pwrseq {
mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
};
......
arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
View file @ 681d855f
......@@ -77,7 +77,7 @@ led-0 {
};
};
mmc0_pwrseq: mmc0_pwrseq {
mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
};
......
arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
View file @ 681d855f
......@@ -109,7 +109,7 @@ vga_dac_out: endpoint {
};
};
reg_vga_3v3: vga_3v3_regulator {
reg_vga_3v3: vga-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vga-3v3";
regulator-min-microvolt = <3300000>;
......@@ -119,7 +119,7 @@ reg_vga_3v3: vga_3v3_regulator {
gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
......
arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
View file @ 681d855f
......@@ -179,14 +179,14 @@ map0 {
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
......@@ -1318,7 +1318,7 @@ prcm@1f01400 {
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
ar100: ar100_clk {
ar100: ar100-clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&rtc CLK_OSC32K>, <&osc24M>,
......@@ -1327,7 +1327,7 @@ ar100: ar100_clk {
clock-output-names = "ar100";
};
ahb0: ahb0_clk {
ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
......@@ -1336,14 +1336,14 @@ ahb0: ahb0_clk {
clock-output-names = "ahb0";
};
apb0: apb0_clk {
apb0: apb0-clk {
compatible = "allwinner,sun6i-a31-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
apb0_gates: apb0_gates_clk {
apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun6i-a31-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
......@@ -1353,14 +1353,14 @@ apb0_gates: apb0_gates_clk {
"apb0_i2c";
};
ir_clk: ir_clk {
ir_clk: ir-clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&rtc CLK_OSC32K>, <&osc24M>;
clock-output-names = "ir";
};
apb0_rst: apb0_rst {
apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
......
arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
View file @ 681d855f
......@@ -75,7 +75,7 @@ led-2 {
};
};
mmc2_pwrseq: mmc2_pwrseq {
mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
};
......
arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
View file @ 681d855f
......@@ -86,7 +86,7 @@ led-1 {
};
};
mmc3_pwrseq: mmc3_pwrseq {
mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
......
arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
View file @ 681d855f
......@@ -96,7 +96,7 @@ led-3 {
};
};
mmc3_pwrseq: mmc3_pwrseq {
mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
clocks = <&ccu CLK_OUT_A>;
......
arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
View file @ 681d855f
......@@ -65,7 +65,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
reg_mmc3_vdd: mmc3_vdd {
reg_mmc3_vdd: regulator-mmc3-vdd {
compatible = "regulator-fixed";
regulator-name = "mmc3_vdd";
regulator-min-microvolt = <3000000>;
......@@ -74,7 +74,7 @@ reg_mmc3_vdd: mmc3_vdd {
gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
reg_gmac_vdd: gmac_vdd {
reg_gmac_vdd: regulator-gmac-vdd {
compatible = "regulator-fixed";
regulator-name = "gmac_vdd";
regulator-min-microvolt = <3000000>;
......
arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
View file @ 681d855f
......@@ -14,7 +14,7 @@ / {
model = "Olimex A20-Olimex-SOM-EVB-eMMC";
compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
mmc2_pwrseq: mmc2_pwrseq {
mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
};
......
arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
View file @ 681d855f
......@@ -13,7 +13,7 @@ / {
model = "Olimex A20-SOM204-EVB-eMMC";
compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
mmc2_pwrseq: mmc2_pwrseq {
mmc2_pwrseq: pwrseq-1 {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
......
arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
View file @ 681d855f
......@@ -65,7 +65,7 @@ led-2 {
};
};
rtl_pwrseq: rtl_pwrseq {
rtl_pwrseq: pwrseq-0 {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
};
......@@ -177,7 +177,7 @@ &mmc3 {
non-removable;
status = "okay";
rtl8723bs: sdio_wifi@1 {
rtl8723bs: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
View file @ 681d855f
......@@ -82,7 +82,7 @@ led {
};
};
reg_axp_ipsout: axp_ipsout {
reg_axp_ipsout: regulator-axp-ipsout {
compatible = "regulator-fixed";
regulator-name = "axp-ipsout";
regulator-min-microvolt = <5000000>;
......
arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
View file @ 681d855f
......@@ -60,7 +60,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
mmc3_pwrseq: mmc3_pwrseq {
mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
......
arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
View file @ 681d855f
......@@ -153,14 +153,14 @@ map0 {
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
......
arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
View file @ 681d855f
......@@ -108,7 +108,7 @@ clocks {
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
......@@ -116,7 +116,7 @@ osc24M: osc24M_clk {
clock-output-names = "osc24M";
};
ext_osc32k: ext_osc32k_clk {
ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......@@ -733,7 +733,7 @@ prcm@1f01400 {
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
ar100: ar100_clk {
ar100: ar100-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
......@@ -742,7 +742,7 @@ ar100: ar100_clk {
clock-output-names = "ar100";
};
ahb0: ahb0_clk {
ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
......@@ -751,14 +751,14 @@ ahb0: ahb0_clk {
clock-output-names = "ahb0";
};
apb0: apb0_clk {
apb0: apb0-clk {
compatible = "allwinner,sun8i-a23-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
apb0_gates: apb0_gates_clk {
apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun8i-a23-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
......@@ -767,7 +767,7 @@ apb0_gates: apb0_gates_clk {
"apb0_i2c";
};
apb0_rst: apb0_rst {
apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
......
arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
View file @ 681d855f
......@@ -52,7 +52,7 @@ aliases {
ethernet0 = &esp8089;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
......@@ -76,7 +76,7 @@ &mmc1 {
non-removable;
status = "okay";
esp8089: sdio_wifi@1 {
esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
......
arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
View file @ 681d855f
......@@ -52,7 +52,7 @@ aliases {
ethernet0 = &esp8089;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
......@@ -69,7 +69,7 @@ &mmc1 {
non-removable;
status = "okay";
esp8089: sdio_wifi@1 {
esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
......
arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
View file @ 681d855f
......@@ -85,7 +85,7 @@ &mmc1 {
non-removable;
status = "okay";
rtl8703as: sdio_wifi@1 {
rtl8703as: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
View file @ 681d855f
......@@ -78,7 +78,7 @@ &mmc1 {
non-removable;
status = "okay";
rtl8723bs: sdio_wifi@1 {
rtl8723bs: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
View file @ 681d855f
......@@ -323,35 +323,35 @@ map3 {
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
gpu_alert0: gpu_alert0 {
gpu_alert0: gpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert1: cpu_alert1 {
cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
gpu_alert1: gpu_alert1 {
gpu_alert1: gpu-alert1 {
/* milliCelsius */
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
cpu_crit: cpu_crit {
cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
......
arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
View file @ 681d855f
......@@ -95,7 +95,7 @@ reg_usb1_vbus: reg-usb1-vbus {
gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
......
arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
View file @ 681d855f
......@@ -144,7 +144,7 @@ spdif_out: spdif-out {
compatible = "linux,spdif-dit";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
......
arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
View file @ 681d855f
......@@ -123,7 +123,7 @@ reg_vmain: reg-vmain {
vin-supply = <&reg_vbat>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
......
arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
View file @ 681d855f
......@@ -164,7 +164,7 @@ clocks {
ranges;
/* TODO: PRCM block has a mux for this. */
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
......@@ -177,14 +177,14 @@ osc24M: osc24M_clk {
* It is an internal RC-based oscillator.
* TODO: Its controls are in the PRCM block.
*/
osc16M: osc16M_clk {
osc16M: osc16M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-output-names = "osc16M";
};
osc16Md512: osc16Md512_clk {
osc16Md512: osc16Md512-clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <512>;
......@@ -1127,7 +1127,7 @@ r_ccu: clock@1f01400 {
#reset-cells = <1>;
};
r_cpucfg@1f01c00 {
cpucfg@1f01c00 {
compatible = "allwinner,sun8i-a83t-r-cpucfg";
reg = <0x1f01c00 0x400>;
};
......
arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
View file @ 681d855f
......@@ -103,7 +103,7 @@ poweroff {
cpu-supply = <&reg_vcc1v2>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
View file @ 681d855f
......@@ -43,11 +43,12 @@
/* Orange Pi R1 is based on Orange Pi Zero design */
#include "sun8i-h2-plus-orangepi-zero.dts"
/delete-node/ &reg_vcc_wifi;
/ {
model = "Xunlong Orange Pi R1";
compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
/delete-node/ reg_vcc_wifi;
/*
* Ths pin of this regulator is the same with the Wi-Fi extra
......@@ -89,7 +90,7 @@ &mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
rtl8189etv: sdio_wifi@1 {
rtl8189etv: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
View file @ 681d855f
......@@ -80,7 +80,7 @@ status_led {
};
};
reg_vcc_wifi: reg_vcc_wifi {
reg_vcc_wifi: reg-vcc-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
......@@ -105,7 +105,7 @@ reg_vdd_cpux: vdd-cpux-regulator {
states = <1100000 0>, <1300000 1>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
......@@ -149,7 +149,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
xr819: sdio_wifi@1 {
xr819: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
View file @ 681d855f
......@@ -122,7 +122,7 @@ spdif_out: spdif-out {
compatible = "linux,spdif-dit";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......@@ -185,7 +185,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
sdiowifi: sdio_wifi@1 {
sdiowifi: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
View file @ 681d855f
......@@ -87,7 +87,7 @@ reg_vdd_sys: vdd-sys {
vin-supply = <&reg_vcc5v0>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......@@ -119,7 +119,7 @@ &mmc1 {
non-removable;
status = "okay";
sdio_wifi: sdio_wifi@1 {
sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
......
arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
View file @ 681d855f
......@@ -62,7 +62,7 @@ reg_gmac_3v3: gmac-3v3 {
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
......@@ -132,7 +132,7 @@ &mmc1 {
non-removable;
status = "okay";
sdio_wifi: sdio_wifi@1 {
sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
......
arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
View file @ 681d855f
......@@ -73,7 +73,7 @@ led-1 {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
View file @ 681d855f
......@@ -43,7 +43,7 @@ reg_vdd_cpux: gpio-regulator {
<1300000 0x1>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
View file @ 681d855f
......@@ -105,7 +105,7 @@ switch-4 {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
......@@ -169,7 +169,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
rtl8189: sdio_wifi@1 {
rtl8189: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
View file @ 681d855f
......@@ -143,7 +143,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
rtl8189ftv: sdio_wifi@1 {
rtl8189ftv: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
View file @ 681d855f
......@@ -63,7 +63,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
rtl8189ftv: sdio_wifi@1 {
rtl8189ftv: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
View file @ 681d855f
......@@ -92,7 +92,7 @@ reg_vcc3v3: vcc3v3 {
regulator-max-microvolt = <3300000>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
......
arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
View file @ 681d855f
......@@ -62,7 +62,7 @@ panel_input: endpoint {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
/*
* Q8 boards use various PL# pins as wifi-en. On other boards
......@@ -94,7 +94,7 @@ &mmc1 {
non-removable;
status = "okay";
sdio_wifi: sdio_wifi@1 {
sdio_wifi: wifi@1 {
reg = <1>;
};
};
......
arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
View file @ 681d855f
......@@ -88,7 +88,7 @@ reg_vcc5v0: vcc5v0 {
regulator-max-microvolt = <5000000>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
View file @ 681d855f
......@@ -75,7 +75,7 @@ led-2 {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
};
......
arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
View file @ 681d855f
......@@ -100,7 +100,7 @@ reg_vcc5v0: vcc5v0 {
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
......
arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
View file @ 681d855f
......@@ -62,7 +62,7 @@ reg_vcc5v0: vcc5v0 {
regulator-max-microvolt = <5000000>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
clocks = <&ccu CLK_OUTA>;
......
arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
View file @ 681d855f
......@@ -51,7 +51,7 @@ reg_vcc_wifi: vcc-wifi {
startup-delay-us = <200000>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
post-power-on-delay-ms = <200>;
......
arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
View file @ 681d855f
......@@ -98,7 +98,7 @@ clocks {
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
......@@ -106,7 +106,7 @@ osc24M: osc24M_clk {
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
View file @ 681d855f
......@@ -94,7 +94,7 @@ reg_vcc5v0: vcc5v0 {
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
......
arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
View file @ 681d855f
......@@ -196,14 +196,14 @@ osc32k: clk-32k {
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: mii_phy_tx_clk {
mii_phy_tx_clk: mii-phy-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
gmac_int_tx_clk: gmac_int_tx_clk {
gmac_int_tx_clk: gmac-int-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
......
arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
View file @ 681d855f
......@@ -98,7 +98,7 @@ reg_gmac_3v3: gmac-3v3 {
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
View file @ 681d855f
......@@ -18,7 +18,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
......
arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
View file @ 681d855f
......@@ -83,7 +83,7 @@ clocks {
#size-cells = <1>;
ranges;
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
......@@ -91,7 +91,7 @@ osc24M: osc24M_clk {
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm64/boot/dts/allwinner/Makefile
View file @ 681d855f
......@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
......
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
View file @ 681d855f
......@@ -53,7 +53,7 @@ led-2 {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
View file @ 681d855f
......@@ -41,7 +41,7 @@ led {
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
......
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
View file @ 681d855f
......@@ -52,7 +52,7 @@ reg_usb1_vbus: usb1-vbus {
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
View file @ 681d855f
......@@ -68,7 +68,7 @@ reg_usb1_vbus: usb1-vbus {
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
......
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
View file @ 681d855f
......@@ -79,7 +79,7 @@ reg_vcc5v0: vcc5v0 {
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
View file @ 681d855f
......@@ -39,25 +39,35 @@ chosen {
leds {
compatible = "gpio-leds";
led-0 {
led0: led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
retain-state-suspended;
};
led-1 {
led1: led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
retain-state-suspended;
};
led-2 {
led2: led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
retain-state-suspended;
};
};
multi-led {
compatible = "leds-group-multicolor";
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_INDICATOR;
leds = <&led0>, <&led1>, <&led2>;
};
reg_ps: ps-regulator {
compatible = "regulator-fixed";
regulator-name = "ps";
......
arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
View file @ 681d855f
......@@ -98,7 +98,7 @@ vdd_bl: regulator {
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
......
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
View file @ 681d855f
......@@ -74,7 +74,7 @@ reg_usb1_vbus: usb1-vbus {
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
View file @ 681d855f
......@@ -107,27 +107,19 @@ de: display-engine {
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-120000000 {
opp-hz = /bits/ 64 <120000000>;
};
opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
};
opp-432000000 {
opp-hz = /bits/ 64 <432000000>;
};
};
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......@@ -216,21 +208,21 @@ map1 {
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert1: cpu_alert1 {
cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cpu_crit: cpu_crit {
cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
......
arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts 0 → 100644
View file @ 681d855f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2024 Arm Ltd.
*/
/dts-v1/;
#include "sun50i-h616.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Tanix TX1";
compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
aliases {
serial0 = &uart0;
ethernet0 = &sdio_wifi;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
key {
label = "hidden";
linux,code = <BTN_0>;
gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
};
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
default-state = "on";
};
};
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
pinctrl-0 = <&x32clk_fanout_pin>;
pinctrl-names = "default";
reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the DC input */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&ir {
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
sdio_wifi: wifi@1 {
reg = <1>;
};
};
&mmc2 {
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_aldo1>;
bus-width = <8>;
non-removable;
max-frequency = <100000000>;
cap-mmc-hw-reset;
mmc-ddr-1_8v;
status = "okay";
};
&ohci0 {
status = "okay";
};
&pio {
vcc-pc-supply = <&reg_aldo1>;
vcc-pf-supply = <&reg_dldo1>;
vcc-pg-supply = <&reg_aldo1>;
vcc-ph-supply = <&reg_dldo1>;
vcc-pi-supply = <&reg_dldo1>;
};
&r_i2c {
status = "okay";
axp313: pmic@36 {
compatible = "x-powers,axp313a";
reg = <0x36>;
#interrupt-cells = <1>;
interrupt-controller;
vin1-supply = <&reg_vcc5v>;
vin2-supply = <&reg_vcc5v>;
vin3-supply = <&reg_vcc5v>;
regulators {
/* Supplies VCC-PLL, so needs to be always on. */
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8";
};
/* Supplies VCC-IO, so needs to be always on. */
reg_dldo1: dldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3";
};
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <990000>;
regulator-name = "vdd-gpu-sys";
};
reg_dcdc2: dcdc2 {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1120000>;
regulator-name = "vdd-cpu";
};
reg_dcdc3: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd-dram";
};
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usbotg {
dr_mode = "host"; /* USB A type receptable */
status = "okay";
};
&usbphy {
status = "okay";
};
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
View file @ 681d855f
......@@ -68,7 +68,7 @@ vdd_cpux: gpio-regulator {
states = <1100000 0>, <1300000 1>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
......
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
View file @ 681d855f
......@@ -103,7 +103,7 @@ vdd_cpux: gpio-regulator {
states = <1100000 0x0>, <1300000 0x1>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
......@@ -170,7 +170,7 @@ &mmc1 {
non-removable;
status = "okay";
rtl8189etv: sdio_wifi@1 {
rtl8189etv: wifi@1 {
reg = <1>;
};
};
......
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
View file @ 681d855f
......@@ -85,7 +85,7 @@ reg_usb0_vbus: usb0-vbus {
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
};
......
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
View file @ 681d855f
......@@ -97,7 +97,7 @@ &mmc1 {
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
rtl8189ftv: sdio_wifi@1 {
rtl8189ftv: wifi@1 {
reg = <1>;
};
};
......
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
View file @ 681d855f
......@@ -52,7 +52,7 @@ reg_vcc3v3: vcc3v3 {
regulator-max-microvolt = <3300000>;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
View file @ 681d855f
......@@ -34,7 +34,7 @@ hdmi_con_in: endpoint {
};
};
ext_osc32k: ext_osc32k_clk {
ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
View file @ 681d855f
......@@ -33,7 +33,7 @@ hdmi_con_in: endpoint {
};
};
ext_osc32k: ext_osc32k_clk {
ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
View file @ 681d855f
......@@ -11,7 +11,7 @@ aliases {
serial1 = &uart1; /* BT-UART */
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
......
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
View file @ 681d855f
......@@ -32,7 +32,7 @@ hdmi_con_in: endpoint {
};
};
ext_osc32k: ext_osc32k_clk {
ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
View file @ 681d855f
......@@ -5,13 +5,13 @@
#include "sun50i-h6-pine-h64.dts"
/delete-node/ &reg_gmac_3v3;
/ {
model = "Pine H64 model B";
compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
/delete-node/ reg_gmac_3v3;
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
View file @ 681d855f
......@@ -22,7 +22,7 @@ chosen {
stdout-path = "serial0:115200n8";
};
ext_osc32k: ext_osc32k_clk {
ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
......
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
View file @ 681d855f
......@@ -68,7 +68,7 @@ de: display-engine {
status = "disabled";
};
osc24M: osc24M_clk {
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
......
arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
View file @ 681d855f
......@@ -194,7 +194,7 @@ ext_rgmii_pins: rgmii-pins {
};
i2c0_pins: i2c0-pins {
pins = "PI6", "PI7";
pins = "PI5", "PI6";
function = "i2c0";
};
......@@ -775,6 +775,15 @@ r_ccu: clock@7010000 {
#reset-cells = <1>;
};
nmi_intc: interrupt-controller@7010320 {
compatible = "allwinner,sun50i-h616-nmi",
"allwinner,sun9i-a80-nmi";
reg = <0x07010320 0xc>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
};
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h616-r-pinctrl";
reg = <0x07022000 0x400>;
......
arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
View file @ 681d855f
......@@ -41,7 +41,7 @@ reg_vcc3v3: vcc3v3 {
regulator-always-on;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
......
arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts
View file @ 681d855f
......@@ -42,7 +42,7 @@ reg_vcc5v: regulator-5v {
regulator-always-on;
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7