Commit 68843129 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'omap-for-v3.9-rc3/fixes-signed' of...

Merge tag 'omap-for-v3.9-rc3/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren <tony@atomide.com>:

A clock regression fix that happened with the common clock
conversion, and few USB regression fixes.

* tag 'omap-for-v3.9-rc3/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized
  ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup
  ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb
  ARM: OMAP4: clock data: lock USB DPLL on boot
  ARM: OMAP1: fix USB host on 1710
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents b7e8c43c ff931c82
......@@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = USB_REQ_EN_SHIFT,
};
static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
......@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
......
......@@ -52,6 +52,13 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
/*
* OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
* "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
* locked frequency for the USB DPLL is 960MHz.
*/
#define OMAP4_DPLL_USB_DEFFREQ 960000000
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
......@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
......@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
......@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
/*
* Lock USB DPLL on OMAP4 devices so that the L3INIT power
* domain can transition to retention state when not in use.
*/
rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
if (rc)
pr_err("%s: failed to configure USB DPLL!\n", __func__);
return 0;
}
......@@ -293,5 +293,8 @@ extern void omap_reserve(void);
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
/* SoC specific clock initializer */
extern int (*omap_clk_init)(void);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
......@@ -54,6 +54,12 @@
#include "prm3xxx.h"
#include "prm44xx.h"
/*
* omap_clk_init: points to a function that does the SoC-specific
* clock initializations
*/
int (*omap_clk_init)(void);
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
......@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
omap2420_clk_init();
omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
......@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
omap2430_clk_init();
omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
......@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
......@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
......@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
am33xx_clk_init();
omap_clk_init = am33xx_clk_init;
}
#endif
......@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
omap4xxx_clk_init();
omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)
......
......@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
if (oh->flags & HWMOD_FORCE_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
......@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
(oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
......
......@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
* out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
......@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
* HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
* is kept in force-standby mode. Failing to do so causes PM problems
* with musb on OMAP3630 at least. Note that musb has a dedicated register
* to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
......@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
......
......@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
*
* Enabling the device in any other MIDLEMODE setting but force-idle
* causes core_pwrdm not enter idle states at least on OMAP3630.
* Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
* signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
| HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
......
......@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
{ }
};
static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
};
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
......@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
},
},
.dev_attr = ocp2scp_dev_attr,
.opt_clks = ocp2scp_usb_phy_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
......
......@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
clksrc_nr, clksrc_src) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
if (omap_clk_init) \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
......@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void) \
clksrc_nr, clksrc_src) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
if (omap_clk_init) \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment