Documentation / thunderbolt: Clean up entries

Align the "What" entries along with the rest and move
nvm_authenticate_on_disconnect to correct place.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Documentation/ABI/testing/sysfs-bus-thunderbolt

-What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl
+What:		/sys/bus/thunderbolt/devices/.../domainX/boot_acl
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
@@ -21,7 +21,7 @@ Description:	Holds a comma separated list of device unique_ids that
 		If a device is authorized automatically during boot its
 		boot attribute is set to 1.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization
+What:		/sys/bus/thunderbolt/devices/.../domainX/deauthorization
 Date:		May 2021
 KernelVersion:	5.12
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
@@ -30,7 +30,7 @@ Description:	This attribute tells whether the system supports
 		de-authorize PCIe tunnel by writing 0 to authorized
 		attribute under each device.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
+What:		/sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
 Date:		Mar 2019
 KernelVersion:	4.21
 Contact:	thunderbolt-software@lists.01.org
@@ -39,7 +39,7 @@ Description:	This attribute tells whether the system uses IOMMU
 		it is not (DMA protection is solely based on Thunderbolt
 		security levels).
 
-What: /sys/bus/thunderbolt/devices/.../domainX/security
+What:		/sys/bus/thunderbolt/devices/.../domainX/security
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -61,7 +61,7 @@ Description:	This attribute holds current Thunderbolt security level
 			 the BIOS.
 		=======  ==================================================
 
-What: /sys/bus/thunderbolt/devices/.../authorized
+What:		/sys/bus/thunderbolt/devices/.../authorized
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -95,14 +95,14 @@ Description:	This attribute is used to authorize Thunderbolt devices
 		    EKEYREJECTED if the challenge response did not match.
 		==  ========================================================
 
-What: /sys/bus/thunderbolt/devices/.../boot
+What:		/sys/bus/thunderbolt/devices/.../boot
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
 Description:	This attribute contains 1 if Thunderbolt device was already
 		authorized on boot and 0 otherwise.
 
-What: /sys/bus/thunderbolt/devices/.../generation
+What:		/sys/bus/thunderbolt/devices/.../generation
 Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Christian Kellner <christian@kellner.me>
@@ -110,7 +110,7 @@ Description:	This attribute contains the generation of the Thunderbolt
 		controller associated with the device. It will contain 4
 		for USB4.
 
-What: /sys/bus/thunderbolt/devices/.../key
+What:		/sys/bus/thunderbolt/devices/.../key
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -226,6 +226,20 @@ Description:	When new NVM image is written to the non-active NVM
 		based mailbox before the device is power cycled. Writing
 		0 here clears the status.
 
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+
+		- Writing "1" will flush the image to the storage
+		  area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		  and flush it to the storage area.
+
 What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/key
 Date:		Jan 2018
 KernelVersion:	4.15
@@ -308,17 +322,3 @@ Date:		Oct 2020
 KernelVersion:	v5.9
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	Retimer vendor identifier read from the hardware.
-
-What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
-Date:		Oct 2020
-KernelVersion:	v5.9
-Contact:	Mario Limonciello <mario.limonciello@dell.com>
-Description:	For supported devices, automatically authenticate the new Thunderbolt
-		image when the device is disconnected from the host system.
-
-		This file will accept writing values "1" or "2"
-
-		- Writing "1" will flush the image to the storage
-		  area and prepare the device for authentication on disconnect.
-		- Writing "2" will run some basic validation on the image
-		  and flush it to the storage area.