Commit 68a3c043 authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Mauro Carvalho Chehab

[media] ARM: OMAP2: RX-51: update si4713 platform data

This updates platform data related to Si4713, which
has been updated to be compatible with DT interface.
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 5325d844
......@@ -23,6 +23,7 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/gpio/machine.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
......@@ -38,7 +39,6 @@
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/platform_data/leds-lp55xx.h>
......@@ -760,46 +760,17 @@ static struct regulator_init_data rx51_vintdig = {
},
};
static const char * const si4713_supply_names[] = {
"vio",
"vdd",
};
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.supplies = ARRAY_SIZE(si4713_supply_names),
.supply_names = si4713_supply_names,
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
.platform_data = &rx51_si4713_i2c_data,
};
static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
.i2c_bus = 2,
.subdev_board_info = &rx51_si4713_board_info,
};
static struct platform_device rx51_si4713_dev __initdata_or_module = {
.name = "radio-si4713",
.id = -1,
.dev = {
.platform_data = &rx51_si4713_data,
static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
.dev_id = "2-0063",
.table = {
GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
{ },
},
};
static __init void rx51_init_si4713(void)
static __init void rx51_gpio_init(void)
{
int err;
err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
if (err) {
printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
return;
}
rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
platform_device_register(&rx51_si4713_dev);
gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
}
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
......@@ -1029,7 +1000,17 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
.gpio_reset = 60,
};
static struct si4713_platform_data rx51_si4713_platform_data = {
.is_platform_device = true
};
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
{
I2C_BOARD_INFO("si4713", 0x63),
.platform_data = &rx51_si4713_platform_data,
},
#endif
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data,
......@@ -1070,6 +1051,10 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
static int __init rx51_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
int err;
#endif
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
system_rev >= SYSTEM_REV_B_USES_VAUX3) {
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
......@@ -1087,6 +1072,14 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
if (err) {
printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
return err;
}
rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
#endif
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
......@@ -1300,6 +1293,7 @@ static void __init rx51_init_omap3_rom_rng(void)
void __init rx51_peripherals_init(void)
{
rx51_gpio_init();
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
......@@ -1307,7 +1301,6 @@ void __init rx51_peripherals_init(void)
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
rx51_init_si4713();
rx51_init_lirc();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment