Skip to content

L
linux
Commit 6909c66d authored by Joe Perches's avatar Joe Perches Committed by David S. Miller
Browse files
Options

drivers/net/ixgb: Use netif_printk macros 

Convert private DPRINTK macro uses to netif_<level> equivalents
Remove #define DPRINTK
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 177867ce
Hide whitespace changes
Inline Side-by-side
Showing with 51 additions and 49 deletions
drivers/net/ixgb/ixgb.h
View file @ 6909c66d
......@@ -75,19 +75,14 @@ struct ixgb_adapter;
#include "ixgb_ee.h"
#include "ixgb_ids.h"
#define PFX "ixgb: "
#ifdef _DEBUG_DRIVER_
#define IXGB_DBG(args...) printk(KERN_DEBUG "ixgb: " args)
#define IXGB_DBG(args...) printk(KERN_DEBUG PFX args)
#else
#define IXGB_DBG(args...)
#endif
#define PFX "ixgb: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
__func__ , ## args))
/* TX/RX descriptor defines */
#define DEFAULT_TXD 256
#define MAX_TXD 4096
......
drivers/net/ixgb/ixgb_main.c
View file @ 6909c66d
......@@ -238,8 +238,8 @@ ixgb_up(struct ixgb_adapter *adapter)
if (err) {
if (adapter->have_msi)
pci_disable_msi(adapter->pdev);
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
netif_err(adapter, probe, adapter->netdev,
"Unable to allocate interrupt Error: %d\n", err);
return err;
}
......@@ -310,7 +310,7 @@ ixgb_reset(struct ixgb_adapter *adapter)
ixgb_adapter_stop(hw);
if (!ixgb_init_hw(hw))
DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n");
netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
/* restore frame size information */
IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
......@@ -447,7 +447,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* make sure the EEPROM is good */
if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
netif_err(adapter, probe, adapter->netdev,
"The EEPROM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
......@@ -456,7 +457,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
err = -EIO;
goto err_eeprom;
}
......@@ -477,7 +478,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n");
netif_info(adapter, probe, adapter->netdev,
"Intel(R) PRO/10GbE Network Connection\n");
ixgb_check_options(adapter);
/* reset the hardware with the new settings */
......@@ -552,14 +554,14 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
if ((hw->device_id == IXGB_DEVICE_ID_82597EX)
|| (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4)
|| (hw->device_id == IXGB_DEVICE_ID_82597EX_LR)
|| (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
(hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
(hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
(hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
hw->mac_type = ixgb_82597;
else {
/* should never have loaded on this device */
DPRINTK(PROBE, ERR, "unsupported device id\n");
netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
}
/* enable flow control to be programmed */
......@@ -661,8 +663,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
size = sizeof(struct ixgb_buffer) * txdr->count;
txdr->buffer_info = vmalloc(size);
if (!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate transmit descriptor ring memory\n");
netif_err(adapter, probe, adapter->netdev,
"Unable to allocate transmit descriptor ring memory\n");
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
......@@ -675,8 +677,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
if (!txdr->desc) {
vfree(txdr->buffer_info);
DPRINTK(PROBE, ERR,
"Unable to allocate transmit descriptor memory\n");
netif_err(adapter, probe, adapter->netdev,
"Unable to allocate transmit descriptor memory\n");
return -ENOMEM;
}
memset(txdr->desc, 0, txdr->size);
......@@ -750,8 +752,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
size = sizeof(struct ixgb_buffer) * rxdr->count;
rxdr->buffer_info = vmalloc(size);
if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate receive descriptor ring\n");
netif_err(adapter, probe, adapter->netdev,
"Unable to allocate receive descriptor ring\n");
return -ENOMEM;
}
memset(rxdr->buffer_info, 0, size);
......@@ -765,8 +767,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
if (!rxdr->desc) {
vfree(rxdr->buffer_info);
DPRINTK(PROBE, ERR,
"Unable to allocate receive descriptors\n");
netif_err(adapter, probe, adapter->netdev,
"Unable to allocate receive descriptors\n");
return -ENOMEM;
}
memset(rxdr->desc, 0, rxdr->size);
......@@ -1580,7 +1582,8 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu)
/* MTU < 68 is an error for IPv4 traffic, just don't allow it */
if ((new_mtu < 68) ||
(max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
DPRINTK(PROBE, ERR, "Invalid MTU setting %d\n", new_mtu);
netif_err(adapter, probe, adapter->netdev,
"Invalid MTU setting %d\n", new_mtu);
return -EINVAL;
}
......@@ -1854,24 +1857,25 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
&& !(IXGB_READ_REG(&adapter->hw, STATUS) &
IXGB_STATUS_TXOFF)) {
/* detected Tx unit hang */
DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
" TDH <%x>\n"
" TDT <%x>\n"
" next_to_use <%x>\n"
" next_to_clean <%x>\n"
"buffer_info[next_to_clean]\n"
" time_stamp <%lx>\n"
" next_to_watch <%x>\n"
" jiffies <%lx>\n"
" next_to_watch.status <%x>\n",
IXGB_READ_REG(&adapter->hw, TDH),
IXGB_READ_REG(&adapter->hw, TDT),
tx_ring->next_to_use,
tx_ring->next_to_clean,
tx_ring->buffer_info[eop].time_stamp,
eop,
jiffies,
eop_desc->status);
netif_err(adapter, drv, adapter->netdev,
"Detected Tx Unit Hang\n"
" TDH <%x>\n"
" TDT <%x>\n"
" next_to_use <%x>\n"
" next_to_clean <%x>\n"
"buffer_info[next_to_clean]\n"
" time_stamp <%lx>\n"
" next_to_watch <%x>\n"
" jiffies <%lx>\n"
" next_to_watch.status <%x>\n",
IXGB_READ_REG(&adapter->hw, TDH),
IXGB_READ_REG(&adapter->hw, TDT),
tx_ring->next_to_use,
tx_ring->next_to_clean,
tx_ring->buffer_info[eop].time_stamp,
eop,
jiffies,
eop_desc->status);
netif_stop_queue(netdev);
}
}
......@@ -2269,7 +2273,8 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
struct ixgb_adapter *adapter = netdev_priv(netdev);
if (pci_enable_device(pdev)) {
DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n");
netif_err(adapter, probe, adapter->netdev,
"Cannot re-enable PCI device after reset\n");
return PCI_ERS_RESULT_DISCONNECT;
}
......@@ -2285,14 +2290,16 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
/* Make sure the EEPROM is good */
if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n");
netif_err(adapter, probe, adapter->netdev,
"After reset, the EEPROM checksum is not valid\n");
return PCI_ERS_RESULT_DISCONNECT;
}
ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n");
netif_err(adapter, probe, adapter->netdev,
"After reset, invalid MAC address\n");
return PCI_ERS_RESULT_DISCONNECT;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7