Merge

arch/x86_64/Makefile

@@ -40,8 +40,10 @@ LDFLAGS_vmlinux := -e stext
 CFLAGS += -mno-red-zone
 CFLAGS += -mcmodel=kernel
 CFLAGS += -pipe
-# this makes reading assembly source easier
+# this makes reading assembly source easier, but produces worse code
+# disable for production kernel
 CFLAGS += -fno-reorder-blocks	
+# should lower this a lot and see how much .text is saves	
 CFLAGS += -finline-limit=2000
 #CFLAGS += -g
 

arch/x86_64/kernel/Makefile

@@ -4,7 +4,7 @@
 
 EXTRA_TARGETS 	:= head.o head64.o init_task.o
 
-export-objs     := mtrr.o x8664_ksyms.o pci-gart.o
+export-objs     := mtrr.o x8664_ksyms.o pci-gart.o pci-dma.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \

arch/x86_64/kernel/acpi.c

@@ -43,6 +43,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/io_apic.h>
+#include <asm/proto.h>
 
 extern int acpi_disabled;
 
@@ -57,15 +58,6 @@ extern int acpi_disabled;
 
 enum acpi_irq_model_id		acpi_irq_model;
 
-
-/*
- * Use reserved fixmap pages for physical-to-virtual mappings of ACPI tables.
- * Note that the same range is used for each table, so tables that need to
- * persist should be memcpy'd.
- */
-
-extern unsigned long end_pfn; 
-
 /* rely on all ACPI tables being in the direct mapping */
 char *
 __acpi_map_table (
@@ -75,7 +67,7 @@ __acpi_map_table (
 	if (!phys_addr || !size)
 		return NULL;
 
-	if (phys_addr < (end_pfn << PAGE_SHIFT)) 
+	if (phys_addr < (end_pfn_map << PAGE_SHIFT)) 
 		return __va(phys_addr); 
 
 	printk("acpi mapping beyond end_pfn: %lx > %lx\n", phys_addr, end_pfn<<PAGE_SHIFT);

arch/x86_64/kernel/apic.c

@@ -668,7 +668,7 @@ void __init init_apic_mappings(void)
 		apic_phys = mp_lapic_addr;
 
 	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	Dprintk("mapped APIC to %08lx (%08lx)\n", APIC_BASE, apic_phys);
+	Dprintk("mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
@@ -690,7 +690,7 @@ void __init init_apic_mappings(void)
 				ioapic_phys = __pa(ioapic_phys);
 			}
 			set_fixmap_nocache(idx, ioapic_phys);
-			Dprintk("mapped IOAPIC to %08lx (%08lx)\n",
+			Dprintk("mapped IOAPIC to %016lx (%016lx)\n",
 					__fix_to_virt(idx), ioapic_phys);
 			idx++;
 		}

arch/x86_64/kernel/e820.c

@@ -22,6 +22,18 @@
 extern unsigned long table_start, table_end;
 extern char _end[];
 
+/* 
+ * end_pfn only includes RAM, while end_pfn_map includes all e820 entries.
+ * The direct mapping extends to end_pfn_map, so that we can directly access
+ * ACPI and other tables without having to play with fixmaps.
+ */ 
+unsigned long end_pfn_map; 
+
+/* 
+ * Last pfn which the user wants to use.
+ */
+unsigned long end_user_pfn = MAXMEM>>PAGE_SHIFT;  
+
 extern struct resource code_resource, data_resource, vram_resource;
 
 /* Check for some hardcoded bad areas that early boot is not allowed to touch */ 
@@ -137,21 +149,32 @@ void __init e820_end_of_ram(void)
 {
 	int i;
 	end_pfn = 0;
+	
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i]; 
 		unsigned long start, end;
 
-		/* count all types of areas for now to map ACPI easily */
 		start = round_up(ei->addr, PAGE_SIZE); 
 		end = round_down(ei->addr + ei->size, PAGE_SIZE); 
 		if (start >= end)
 			continue;
+		if (ei->type == E820_RAM) { 
 		if (end > end_pfn<<PAGE_SHIFT)
 			end_pfn = end>>PAGE_SHIFT;
+		} else { 
+			if (end > end_pfn_map<<PAGE_SHIFT) 
+				end_pfn_map = end>>PAGE_SHIFT;
+		} 
 	}
 
-	if (end_pfn > MAXMEM >> PAGE_SHIFT)
-		end_pfn = MAXMEM >> PAGE_SHIFT;
+	if (end_pfn > end_pfn_map) 
+		end_pfn_map = end_pfn;
+	if (end_pfn_map > MAXMEM>>PAGE_SHIFT)
+		end_pfn_map = MAXMEM>>PAGE_SHIFT;
+	if (end_pfn > end_user_pfn)
+		end_pfn = end_user_pfn;
+	if (end_pfn > end_pfn_map) 
+		end_pfn = end_pfn_map; 
 }
 
 /* 
@@ -482,46 +505,23 @@ void __init setup_memory_region(void)
 	e820_print_map(who);
 }
 
-static int usermem __initdata; 
-
-void __init parse_memopt(char *p) 
+void __init parse_memopt(char *p, char **from) 
 { 
-	if (!strncmp(p,"exactmap",8)) { 
-		e820.nr_map = 0;
-		usermem = 1; 
-	} else { 
-	       	/* If the user specifies memory size, we
-		 * blow away any automatically generated
-		 * size
-		 */
-		unsigned long long start_at, mem_size;
-		
-		if (usermem == 0) {
-			/* first time in: zap the whitelist
-			 * and reinitialize it with the
-			 * standard low-memory region.
+	/*
+	 * mem=XXX[kKmM] limits kernel memory to XXX+1MB
+	 *
+	 * It would be more logical to count from 0 instead of from
+	 * HIGH_MEMORY, but we keep that for now for i386 compatibility. 
+	 *	
+	 * No support for custom mapping like i386.  The reason is
+	 * that we need to read the e820 map anyways to handle the
+	 * ACPI mappings in the direct map.  Also on x86-64 there
+	 * should be always a good e820 map. This is only an upper
+	 * limit, you cannot force usage of memory not in e820.
+	 *
+	 * -AK
 			 */
-			e820.nr_map = 0;
-			usermem = 1;
-			add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-		}
-		mem_size = memparse(p, &p);
-		if (*p == '@')
-			start_at = memparse(p+1, &p);
-		else {
-			start_at = HIGH_MEMORY;
-			mem_size -= HIGH_MEMORY;
-			usermem=0;
-		}
-		add_memory_region(start_at, mem_size, E820_RAM);
-	}
-		
+	end_user_pfn = memparse(p, from) + HIGH_MEMORY;
+	end_user_pfn >>= PAGE_SHIFT;	
 } 
 
-void __init print_user_map(void)
-{ 
-	if (usermem) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		e820_print_map("user");
-	}
-}

arch/x86_64/kernel/ioport.c

@@ -64,7 +64,6 @@ asmlinkage int sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 	if (turn_on && !capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
-	tss  = init_tss + get_cpu();
 	if (!t->io_bitmap_ptr) { 
 		t->io_bitmap_ptr = kmalloc((IO_BITMAP_SIZE+1)*4, GFP_KERNEL);
 		if (!t->io_bitmap_ptr) { 
@@ -72,8 +71,11 @@ asmlinkage int sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 			goto out;
 		}
 		memset(t->io_bitmap_ptr,0xff,(IO_BITMAP_SIZE+1)*4);
+		tss  = init_tss + get_cpu();
 		tss->io_map_base = IO_BITMAP_OFFSET;
+		put_cpu(); 
 	}
+	tss = init_tss + get_cpu();
 
 	/*
 	 * do it in the per-thread copy and in the TSS ...

arch/x86_64/kernel/mtrr.c

@@ -28,6 +28,7 @@
 	v2.02  July 2002  Dave Jones <davej@suse.de>
 	  Fix gentry inconsistencies between kernel/userspace.
 	  More casts to clean up warnings.
+	Andi Kleen - rework initialization.
 */
 
 #include <linux/types.h>
@@ -609,17 +610,6 @@ int mtrr_add_page (u64 base, u32 size, unsigned int type, char increment)
 		return -EINVAL;
 	}
 
-#if defined(__x86_64__) && defined(CONFIG_AGP) 
-/*	{
-	agp_kern_info info; 
-	if (type != MTRR_TYPE_UNCACHABLE && agp_copy_info(&info) >= 0 && 
-	    base<<PAGE_SHIFT >= info.aper_base && 
-            (base<<PAGE_SHIFT)+(size<<PAGE_SHIFT) >= 
-			info.aper_base+info.aper_size*1024*1024)
-		printk(KERN_INFO "%s[%d] setting conflicting mtrr into agp aperture\n",current->comm,current->pid); 
-	}*/
-#endif
-
 	/*  Check upper bits of base and last are equal and lower bits are 0
 	   for base and 1 for last  */
 	last = base + size - 1;
@@ -646,7 +636,7 @@ int mtrr_add_page (u64 base, u32 size, unsigned int type, char increment)
 	}
 
 	if (base & (size_or_mask>>PAGE_SHIFT)) {
-		printk (KERN_WARNING "mtrr: base(%Lx) exceeds the MTRR width(%Lx)\n",
+		printk (KERN_WARNING "mtrr: base(%lx) exceeds the MTRR width(%lx)\n",
 				(unsigned long) base,
 				(unsigned long) (size_or_mask>>PAGE_SHIFT));
 		return -EINVAL;
@@ -1226,12 +1216,13 @@ static void compute_ascii (void)
 EXPORT_SYMBOL (mtrr_add);
 EXPORT_SYMBOL (mtrr_del);
 
-
 static void __init mtrr_setup (void)
 {
-	printk ("mtrr: v%s)\n", MTRR_VERSION);
+	/* If you want to use other vendors please port over the modular
+	   framework from i386 first. */
+	if (!cpu_has_mtrr || boot_cpu_data.x86_vendor != X86_VENDOR_AMD) 
+		return; 
 
-	if (cpu_has_mtrr) { 
 		 /* Query the width (in bits) of the physical
 		   addressable memory on the Hammer family. */
 		if ((cpuid_eax (0x80000000) >= 0x80000008)) {
@@ -1244,8 +1235,6 @@ static void __init mtrr_setup (void)
 			 */
 			size_and_mask = (~size_or_mask) & 0x000ffffffffff000L;
 	}
-		printk ("mtrr: detected mtrr type: x86-64\n");
-    }
 }
 
 #ifdef CONFIG_SMP
@@ -1253,48 +1242,42 @@ static void __init mtrr_setup (void)
 static volatile u32 smp_changes_mask __initdata = 0;
 static struct mtrr_state smp_mtrr_state __initdata = { 0, 0 };
 
-void __init mtrr_init_boot_cpu (void)
+#endif	/*  CONFIG_SMP  */
+
+void mtrr_init_cpu(int cpu)
 {
+#ifndef CONFIG_SMP
+	if (cpu == 0) 
+		mtrr_setup();
+#else
+	if (cpu == 0) { 
 	mtrr_setup();
 	get_mtrr_state (&smp_mtrr_state);
-}
-
-
-void __init mtrr_init_secondary_cpu (void)
-{
+	} else { 
 	u64 mask;
 	int count;
 	struct set_mtrr_context ctxt;
 
-	/* Note that this is not ideal, since the cache is only flushed/disabled
-	   for this CPU while the MTRRs are changed, but changing this requires
-	   more invasive changes to the way the kernel boots  */
+		/* Note that this is not ideal, since the cache is
+		   only flushed/disabled for this CPU while the MTRRs
+		   are changed, but changing this requires more
+		   invasive changes to the way the kernel boots  */
 	set_mtrr_prepare (&ctxt);
 	mask = set_mtrr_state (&smp_mtrr_state, &ctxt);
 	set_mtrr_done (&ctxt);
 
 	/*  Use the atomic bitops to update the global mask  */
-	for (count = 0; count < sizeof mask * 8; ++count) {
-		if (mask & 0x01)
+		for (count = 0; count < (sizeof mask) * 8; ++count) {
+			if (mask & 1)
 			set_bit (count, &smp_changes_mask);
 		mask >>= 1;
 	}
+	} 
+#endif
 }
 
-#endif	/*  CONFIG_SMP  */
-
-
-int __init mtrr_init (void)
+static int __init mtrr_init (void)
 {
-#ifdef CONFIG_SMP
-	/* mtrr_setup() should already have been called from mtrr_init_boot_cpu() */
-
-	finalize_mtrr_state (&smp_mtrr_state);
-	mtrr_state_warn (smp_changes_mask);
-#else
-	mtrr_setup();
-#endif
-
 #ifdef CONFIG_PROC_FS
 	proc_root_mtrr = create_proc_entry ("mtrr", S_IWUSR | S_IRUGO, &proc_root);
 	if (proc_root_mtrr) {
@@ -1308,5 +1291,13 @@ int __init mtrr_init (void)
 				&mtrr_fops, NULL);
 #endif
 	init_table ();
+
+#ifdef CONFIG_SMP
+	finalize_mtrr_state (&smp_mtrr_state);
+	mtrr_state_warn (smp_changes_mask);
+#endif
+
 	return 0;
 }
+
+__initcall(mtrr_init);

arch/x86_64/kernel/nmi.c

@@ -25,6 +25,8 @@
 #include <asm/mpspec.h>
 #include <asm/nmi.h>
 
+extern void default_do_nmi(struct pt_regs *);
+
 unsigned int nmi_watchdog = NMI_LOCAL_APIC;
 static unsigned int nmi_hz = HZ;
 unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */

arch/x86_64/kernel/pci-dma.c

@@ -6,6 +6,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <asm/io.h>
 
 dma_addr_t bad_dma_address = -1UL; 
@@ -32,27 +33,24 @@ int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 
 	BUG_ON(direction == PCI_DMA_NONE);
  
- 	/*
- 	 *
- 	 */
  	for (i = 0; i < nents; i++ ) {
 		struct scatterlist *s = &sg[i];
- 		if (s->page) { 
+
+		BUG_ON(!s->page); 
+
 			s->dma_address = pci_map_page(hwdev, s->page, s->offset, 
 						      s->length, direction); 
-		} else
-			BUG(); 
-
-		if (unlikely(s->dma_address == bad_dma_address))
-			goto error; 
-	}
-	return nents;
 
- error: 
+		if (unlikely(s->dma_address == bad_dma_address)) {
 	pci_unmap_sg(hwdev, sg, i, direction); 
 	return 0; 
+		}
+	}
+	return nents;
 }
 
+EXPORT_SYMBOL(pci_map_sg);
+
 /* Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
  * pci_unmap_single() above.
@@ -68,3 +66,5 @@ void pci_unmap_sg(struct pci_dev *dev, struct scatterlist *sg,
 		pci_unmap_single(dev, s->dma_address, s->length, dir); 
 	} 
 }
+
+EXPORT_SYMBOL(pci_unmap_sg);

arch/x86_64/kernel/pci-gart.c

@@ -62,7 +62,7 @@ static unsigned long *iommu_gart_bitmap; /* guarded by iommu_bitmap_lock */
 #define GPTE_VALID    1
 #define GPTE_COHERENT 2
 #define GPTE_ENCODE(x,flag) (((x) & 0xfffffff0) | ((x) >> 28) | GPTE_VALID | (flag))
-#define GPTE_DECODE(x) (((x) & 0xfffff000) | (((x) & 0xff0) << 28))
+#define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
 #define for_all_nb(dev) \
 	pci_for_each_dev(dev) \
@@ -524,7 +524,7 @@ void __init pci_iommu_init(void)
    leak  turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on)
    memaper[=order] allocate an own aperture over RAM with size 32MB^order.  
 */
-__init int iommu_setup(char *opt) 
+__init int iommu_setup(char *opt, char **end) 
 { 
     int arg;
     char *p = opt;
@@ -551,10 +551,11 @@ __init int iommu_setup(char *opt)
 	    if (isdigit(*p) && get_option(&p, &arg)) 
 		    iommu_size = arg;
 	    do {
-		    if (*p == ' ' || *p == 0) 
+		    if (*p == ' ' || *p == 0) { 
+			    *end = p; 
 			    return 0; 
+		    }
 	    } while (*p++ != ','); 
     }
-    return 1;
 } 
 

arch/x86_64/kernel/setup.c

@@ -37,6 +37,7 @@
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/pci.h>
 #include <asm/mtrr.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -196,11 +197,11 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 			acpi_disabled = 1;
 
 		if (!memcmp(from, "mem=", 4))
-			parse_memopt(from+4); 
+			parse_memopt(from+4, &from); 
 
 #ifdef CONFIG_GART_IOMMU 
 		if (!memcmp(from,"iommu=",6)) { 
-			iommu_setup(from+6); 
+			iommu_setup(from+6, &from); 
 		}
 #endif
 
@@ -214,7 +215,6 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 	}
 	*to = '\0';
 	*cmdline_p = command_line;
-	print_user_map(); 
 }
 
 #ifndef CONFIG_DISCONTIGMEM

arch/x86_64/kernel/setup64.c

@@ -21,6 +21,7 @@
 #include <asm/smp.h>
 #include <asm/i387.h>
 #include <asm/percpu.h>
+#include <asm/mtrr.h>
 
 char x86_boot_params[2048] __initdata = {0,};
 

arch/x86_64/kernel/signal.c

@@ -238,7 +238,7 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (! sas_ss_flags(rsp) == 0)
+		if (sas_ss_flags(rsp) == 0)
 			rsp = current->sas_ss_sp + current->sas_ss_size;
 	}
 

arch/x86_64/kernel/smpboot.c

@@ -327,7 +327,7 @@ void __init smp_callin(void)
 	/*
 	 * Must be done before calibration delay is computed
 	 */
-	mtrr_init_secondary_cpu ();
+	mtrr_init_cpu (cpuid);
 #endif
 	/*
 	 * Get our bogomips.
@@ -784,10 +784,6 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 {
 	int apicid, cpu;
 
-#ifdef CONFIG_MTRR
-	/*  Must be done before other processors booted  */
-	mtrr_init_boot_cpu ();
-#endif
 	/*
 	 * Initialize the logical to physical CPU number mapping
 	 * and the per-CPU profiling counter/multiplier

arch/x86_64/kernel/traps.c

@@ -173,7 +173,7 @@ void show_trace(unsigned long *stack)
 	int i;
 
 	printk("\nCall Trace:");
-	i = 0; 
+	i = 12; 
 	
 	estack_end = in_exception_stack(cpu, (unsigned long)stack); 
 	if (estack_end) { 

arch/x86_64/kernel/x8664_ksyms.c

@@ -28,6 +28,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/kdebug.h>
+#include <asm/unistd.h>
 
 extern spinlock_t rtc_lock;
 
@@ -145,6 +146,7 @@ EXPORT_SYMBOL(rtc_lock);
 #undef strcmp 
 #undef bcopy
 #undef strcpy 
+#undef strcat
 
 extern void * memset(void *,int,__kernel_size_t);
 extern size_t strlen(const char *);
@@ -153,6 +155,10 @@ extern void * memmove(void * dest,const void *src,size_t count);
 extern char * strcpy(char * dest,const char *src);
 extern int strcmp(const char * cs,const char * ct);
 extern void *memchr(const void *s, int c, size_t n);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * __memcpy(void *,const void *,__kernel_size_t);
+extern char * strcat(char *, const char *);
+
 EXPORT_SYMBOL_NOVERS(memset);
 EXPORT_SYMBOL_NOVERS(strlen);
 EXPORT_SYMBOL_NOVERS(memmove);
@@ -168,6 +174,15 @@ EXPORT_SYMBOL_NOVERS(strrchr);
 EXPORT_SYMBOL_NOVERS(strnlen);
 EXPORT_SYMBOL_NOVERS(memscan);
 EXPORT_SYMBOL_NOVERS(bcopy);
+EXPORT_SYMBOL_NOVERS(memcpy);
+EXPORT_SYMBOL_NOVERS(__memcpy);
+
+/* syscall export needed for misdesigned sound drivers. */
+extern ssize_t sys_read(unsigned int fd, char * buf, size_t count);
+extern off_t sys_lseek(unsigned int fd, off_t offset, unsigned int origin);
+EXPORT_SYMBOL(sys_read);
+EXPORT_SYMBOL(sys_lseek);
+EXPORT_SYMBOL(sys_open);
 
 EXPORT_SYMBOL(empty_zero_page);
 

arch/x86_64/mm/init.c

@@ -36,6 +36,7 @@
 #include <asm/apic.h>
 #include <asm/tlb.h>
 #include <asm/mmu_context.h>
+#include <asm/proto.h>
 
 unsigned long start_pfn, end_pfn;
 
@@ -171,7 +172,7 @@ static __init void *alloc_low_page(int *index, unsigned long *phys)
 	unsigned long pfn = start_pfn++, paddr; 
 	void *adr;
 
-	if (pfn >= end_pfn) 
+	if (pfn >= end_pfn_map) 
 		panic("alloc_low_page: ran out of memory"); 
 	for (i = 0; temp_mappings[i].allocated; i++) {
 		if (!temp_mappings[i].pmd) 
@@ -239,7 +240,7 @@ void __init init_memory_mapping(void)
 	unsigned long end;
 	unsigned long next; 
 
-	end = PAGE_OFFSET + (end_pfn * PAGE_SIZE); 
+	end = PAGE_OFFSET + (end_pfn_map * PAGE_SIZE); 
 	for (adr = PAGE_OFFSET; adr < end; adr = next) { 
 		int map;
 		unsigned long pgd_phys; 

arch/x86_64/pci/acpi.c

@@ -17,6 +17,8 @@ static int __init pci_acpi_init(void)
 		} else
 			printk(KERN_WARNING "PCI: Invalid ACPI-PCI IRQ routing table\n");
 
+		/* still scan manually in case ACPI forgot some bus */
+		pcibios_fixup_peer_bridges(); 
 	}
 
 	return 0;

arch/x86_64/pci/common.c

@@ -22,7 +22,7 @@
 
 unsigned int pci_probe = PCI_PROBE_CONF1 | PCI_PROBE_CONF2;
 
-int pcibios_last_bus = 0xfe; /* XXX */
+int pcibios_last_bus = 0xff; /* XXX */
 struct pci_bus *pci_root_bus = NULL;
 struct pci_ops *pci_root_ops = NULL;
 

arch/x86_64/pci/irq.c

@@ -296,7 +296,6 @@ static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i
 	return 1;
 }
 
-#if 0 /* kept as reference */
 /* Support for AMD756 PCI IRQ Routing
  * Jhon H. Caicedo <jhcaiced@osso.org.co>
  * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced)
@@ -304,8 +303,6 @@ static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i
  * The AMD756 pirq rules are nibble-based
  * offset 0x56 0-3 PIRQA  4-7  PIRQB
  * offset 0x57 0-3 PIRQC  4-7  PIRQD
- *
- * AMD8111 is similar NIY.
  */
 static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
@@ -315,14 +312,14 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	{
 		irq = read_config_nybble(router, 0x56, pirq - 1);
 	}
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
+	printk(KERN_INFO "AMD: dev %04x:%04x, router pirq : %d get irq : %2d\n",
 		dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", 
+	printk(KERN_INFO "AMD: dev %04x:%04x, router pirq : %d SET irq : %2d\n", 
 		dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 	{
@@ -330,13 +327,25 @@ static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq
 	}
 	return 1;
 }
-#endif
 
 static struct irq_router pirq_routers[] = {
+#if 0 /* all these do not exist on Hammer currently, but keep one example
+	 for each. All these vendors have announced K8 chipsets, so we'll
+	 eventually need a router for them. Luckily they tend to use the
+	 same ones, so with luck just enabling the existing ones will work
+	 when you know the final PCI ids.  */ 
+
+	{ "ALI", PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, pirq_ali_get, pirq_ali_set },
+
 	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, pirq_via_get, pirq_via_set },
-	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, pirq_via_get, pirq_via_set },
-	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, pirq_via_get, pirq_via_set },
+
 	{ "SIS", PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, pirq_sis_get, pirq_sis_set },
+
+#endif
+
+	{ "AMD756 VIPER", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B,
+		pirq_amd756_get, pirq_amd756_set },
+
 	{ "default", 0, 0, NULL, NULL }
 };
 
@@ -348,14 +357,6 @@ static void __init pirq_find_router(void)
 	struct irq_routing_table *rt = pirq_table;
 	struct irq_router *r;
 
-#ifdef CONFIG_PCI_BIOS
-	if (!rt->signature) {
-		printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
-		pirq_router = &pirq_bios_router;
-		return;
-	}
-#endif
-
 	DBG("PCI: Attempting to find IRQ router for %04x:%04x\n",
 	    rt->rtr_vendor, rt->rtr_device);
 
@@ -528,38 +529,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	return 1;
 }
 
-static int __init pcibios_irq_init(void)
-{
-	DBG("PCI: IRQ init\n");
-
-	if (pcibios_enable_irq)
-		return 0;
-
-	pirq_table = pirq_find_routing_table();
-
-	if (pirq_table) {
-		pirq_peer_trick();
-		pirq_find_router();
-		if (pirq_table->exclusive_irqs) {
-			int i;
-			for (i=0; i<16; i++)
-				if (!(pirq_table->exclusive_irqs & (1 << i)))
-					pirq_penalty[i] += 100;
-		}
-		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
-		if (io_apic_assign_pci_irqs)
-			pirq_table = NULL;
-	}
-
-	pcibios_enable_irq = pirq_enable_irq;
-
-	pcibios_fixup_irqs();
-	return 0;
-}
-
-subsys_initcall(pcibios_irq_init);
-
-void __init pcibios_fixup_irqs(void)
+static void __init pcibios_fixup_irqs(void)
 {
 	struct pci_dev *dev;
 	u8 pin;
@@ -625,6 +595,38 @@ void __init pcibios_fixup_irqs(void)
 	}
 }
 
+static int __init pcibios_irq_init(void)
+{
+	DBG("PCI: IRQ init\n");
+
+	if (pcibios_enable_irq)
+		return 0;
+
+	pirq_table = pirq_find_routing_table();
+
+	if (pirq_table) {
+		pirq_peer_trick();
+		pirq_find_router();
+		if (pirq_table->exclusive_irqs) {
+			int i;
+			for (i=0; i<16; i++)
+				if (!(pirq_table->exclusive_irqs & (1 << i)))
+					pirq_penalty[i] += 100;
+		}
+		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+		if (io_apic_assign_pci_irqs)
+			pirq_table = NULL;
+	}
+
+	pcibios_enable_irq = pirq_enable_irq;
+
+	pcibios_fixup_irqs();
+	return 0;
+}
+
+subsys_initcall(pcibios_irq_init);
+
+
 void pcibios_penalize_isa_irq(int irq)
 {
 	/*
@@ -640,12 +642,8 @@ int pirq_enable_irq(struct pci_dev *dev)
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg;
-		if (io_apic_assign_pci_irqs)
-			msg = " Probably buggy MP table.";
-		else
-			msg = "";
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-		       'A' + pin - 1, dev->slot_name, msg);
+		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.\n",
+		       'A' + pin - 1, dev->slot_name);
 	}
 
 	return 0;

arch/x86_64/pci/legacy.c

@@ -9,14 +9,14 @@
  * Discover remaining PCI buses in case there are peer host bridges.
  * We use the number of last PCI bus provided by the PCI BIOS.
  */
-static void __devinit pcibios_fixup_peer_bridges(void)
+void __devinit pcibios_fixup_peer_bridges(void)
 {
 	int n;
 	struct pci_bus bus;
 	struct pci_dev dev;
 	u16 l;
 
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 	for (n=0; n <= pcibios_last_bus; n++) {

arch/x86_64/pci/pci.h

@@ -71,3 +71,6 @@ void pcibios_fixup_irqs(void);
 int pirq_enable_irq(struct pci_dev *dev);
 
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+
+/* legacy.c */
+extern void pcibios_fixup_peer_bridges(void);

arch/x86_64/vmlinux.lds.S

@@ -81,11 +81,11 @@ SECTIONS
 
   . = ALIGN(4096);		/* Init code and data */
   __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
+  .init.text : { *(.init.text) }
+  .init.data : { *(.init.data) }
   . = ALIGN(16);
   __setup_start = .;
-  .setup.init : { *(.setup.init) }
+  .init.setup : { *(.init.setup) }
   __setup_end = .;
   __initcall_start = .;
   .initcall.init : {
@@ -109,8 +109,10 @@ SECTIONS
 
   /* Sections to be discarded */
   /DISCARD/ : {
-	*(.data.exit)
+	*(.exit.data)
+	*(.exit.text)
 	*(.exitcall.exit)
+	*(.eh_frame)
 	}
 
   /* DWARF 2 */

include/asm-x86_64/e820.h

@@ -54,8 +54,7 @@ extern int e820_mapped(unsigned long start, unsigned long end, int type);
 
 extern void e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end);
 
-extern void __init parse_memopt(char *p);
-extern void __init print_user_map(void);
+extern void __init parse_memopt(char *p, char **end);
 
 extern struct e820map e820;
 #endif/*!__ASSEMBLY__*/

include/asm-x86_64/mtrr.h

@@ -107,12 +107,7 @@ static __inline__ int mtrr_del_page (int reg, __u64 base, __u32 size)
 }
 #endif
 
-/*  The following functions are for initialisation: don't use them!  */
-extern int mtrr_init (void);
-#if defined(CONFIG_SMP) && defined(CONFIG_MTRR)
-extern void mtrr_init_boot_cpu (void);
-extern void mtrr_init_secondary_cpu (void);
-#endif
+extern void mtrr_init_cpu(int cpu);
 
 #endif
 

include/asm-x86_64/pci.h

@@ -44,7 +44,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
 
 struct pci_dev;
 
-extern int iommu_setup(char *opt);
+extern int iommu_setup(char *opt, char **end);
 
 extern void pci_iommu_init(void);
 

include/asm-x86_64/percpu.h

-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-#include <linux/config.h>
+#ifndef __ARCH_I386_PERCPU__
+#define __ARCH_I386_PERCPU__
 
-#ifdef CONFIG_SMP
+#include <asm-generic/percpu.h>
 
-#include <asm/pda.h>
-
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-/* Separate out the type, so (int[3], foo) works. */
-#ifndef MODULE
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".percpu"))) __typeof__(type) name##__per_cpu
-#endif
-
-/* Completely hide the relocation from the compiler to avoid problems with 
-   the optimizer */ 
-#define __per_cpu(offset,base) \
-	({ typeof(base) ptr = (void *)base; \
-	   asm("addq %1,%0" : "=r" (ptr) : "r" (offset), "0" (ptr)); ptr; })
-
-/* var is in discarded region: offset to particular copy we want */
-
-#define per_cpu(var,cpu) (*__per_cpu(__per_cpu_offset[cpu], &var##__per_cpu)) 
-#define __get_cpu_var(var) (*__per_cpu(read_pda(cpudata_offset), &var##__per_cpu))
-
-#else /* ! SMP */
-
-/* Can't define per-cpu variables in modules.  Sorry --RR */
-#ifndef MODULE
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) name##__per_cpu
-#endif
-
-#define per_cpu(var, cpu)			((void)cpu, var##__per_cpu)
-#define __get_cpu_var(var)			var##__per_cpu
-#endif
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) name##__per_cpu
-
-extern void setup_per_cpu_areas(void);
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(var##__per_cpu)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(var##__per_cpu)
-
-#endif /* _ASM_X8664_PERCPU_H_ */
+#endif /* __ARCH_I386_PERCPU__ */

include/asm-x86_64/pgtable.h

@@ -274,24 +274,40 @@ static inline int pmd_large(pmd_t pte) {
 #define level3_offset_k(dir, address) ((pgd_t *) pml4_page(*(dir)) + pgd_index(address))
 
 /* PGD - Level3 access */
-
-#define __pgd_offset_k(pgd, address) ((pgd) + pgd_index(address))
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address) ((address >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define current_pgd_offset_k(address) \
-       __pgd_offset_k((pgd_t *)read_pda(level4_pgt), address)
+static inline pgd_t *__pgd_offset_k(pgd_t *pgd, unsigned long address)
+{ 
+	return pgd + pgd_index(address);
+} 
+
+/* Find correct pgd via the hidden fourth level page level: */
 
 /* This accesses the reference page table of the boot cpu. 
    Other CPUs get synced lazily via the page fault handler. */
 static inline pgd_t *pgd_offset_k(unsigned long address)
 {
-	pml4_t pml4;
+	unsigned long addr;
 
-	pml4 = init_level4_pgt[pml4_index(address)];
-	return __pgd_offset_k(__va(pml4_val(pml4) & PTE_MASK), address);
+	addr = pml4_val(init_level4_pgt[pml4_index(address)]);
+	addr &= PHYSICAL_PAGE_MASK;
+	return __pgd_offset_k((pgd_t *)__va(addr), address);
 }
 
+/* Access the pgd of the page table as seen by the current CPU. */ 
+static inline pgd_t *current_pgd_offset_k(unsigned long address)
+{
+	unsigned long addr;
+
+	addr = read_pda(level4_pgt)[pml4_index(address)];
+	addr &= PHYSICAL_PAGE_MASK;
+	return __pgd_offset_k((pgd_t *)__va(addr), address);
+}
+
+#if 0 /* disabled because of confusing/wrong naming. */
 #define __pgd_offset(address) pgd_index(address)
+#endif
+
 #define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
 
 /* PMD  - Level 2 access */

include/asm-x86_64/proto.h

@@ -34,15 +34,13 @@ extern unsigned long numa_free_all_bootmem(void);
 extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
 extern void free_bootmem_generic(unsigned long phys, unsigned len);
 
-extern unsigned long start_pfn, end_pfn; 
+extern unsigned long start_pfn, end_pfn, end_pfn_map; 
 
 extern void show_stack(unsigned long * rsp);
 
 extern void exception_table_check(void);
 
-extern void acpi_boot_init(char *);
-
-int iommu_setup(char *opt);
+extern int acpi_boot_init(char *);
 
 #define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
 #define round_down(x,y) ((x) & ~((y)-1))