amd64_edac: Remove unneeded defines

All F2x110-related bit defines are used at only one place so replace
them with simple BIT() macros.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>

drivers/edac/amd64_edac.h

@@ -244,44 +244,17 @@
 
 
 #define F10_DCTL_SEL_LOW		0x110
-
-#define dct_sel_baseaddr(pvt)    \
-	((pvt->dram_ctl_select_low) & 0xFFFFF800)
-
-#define dct_sel_interleave_addr(pvt)    \
-	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
-
-enum {
-	F10_DCTL_SEL_LOW_DctSelHiRngEn	= BIT(0),
-	F10_DCTL_SEL_LOW_DctSelIntLvEn	= BIT(2),
-	F10_DCTL_SEL_LOW_DctGangEn	= BIT(4),
-	F10_DCTL_SEL_LOW_DctDatIntLv	= BIT(5),
-	F10_DCTL_SEL_LOW_DramEnable	= BIT(8),
-	F10_DCTL_SEL_LOW_MemCleared	= BIT(10),
-};
-
-#define    dct_high_range_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
-
-#define dct_interleave_enabled(pvt)	   \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
-
-#define dct_ganging_enabled(pvt)        \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
-
-#define dct_data_intlv_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
-
-#define dct_dram_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
-
-#define dct_memory_cleared(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
-
+#define dct_sel_baseaddr(pvt)		((pvt->dram_ctl_select_low) & 0xFFFFF800)
+#define dct_sel_interleave_addr(pvt)	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
+#define dct_high_range_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(0))
+#define dct_interleave_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(2))
+#define dct_ganging_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(4))
+#define dct_data_intlv_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(5))
+#define dct_dram_enabled(pvt)		(pvt->dram_ctl_select_low & BIT(8))
+#define dct_memory_cleared(pvt)		(pvt->dram_ctl_select_low & BIT(10))
 
 #define F10_DCTL_SEL_HIGH		0x114
 
-
 /*
  * Function 3 - Misc Control
  */