x86: merge __cpu_disable and cpu_die

They are now equal, and are moved to a common file
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/smpboot.c

@@ -2,6 +2,13 @@
 #include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/percpu.h>
+
+#include <asm/nmi.h>
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/cpu.h>
+#include <asm/numa.h>
 
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
@@ -181,5 +188,83 @@ __init void prefill_possible_map(void)
 	for (i = 0; i < possible; i++)
 		cpu_set(i, cpu_possible_map);
 }
+
+static void __ref remove_cpu_from_maps(int cpu)
+{
+	cpu_clear(cpu, cpu_online_map);
+#ifdef CONFIG_X86_64
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
+	/* was set by cpu_init() */
+	clear_bit(cpu, (unsigned long *)&cpu_initialized);
+	clear_node_cpumask(cpu);
+#endif
+}
+
+int __cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * Perhaps use cpufreq to drop frequency, but that could go
+	 * into generic code.
+	 *
+	 * We won't take down the boot processor on i386 due to some
+	 * interrupts only being able to be serviced by the BSP.
+	 * Especially so if we're not using an IOAPIC	-zwane
+	 */
+	if (cpu == 0)
+		return -EBUSY;
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		stop_apic_nmi_watchdog(NULL);
+	clear_local_APIC();
+
+	/*
+	 * HACK:
+	 * Allow any queued timer interrupts to get serviced
+	 * This is only a temporary solution until we cleanup
+	 * fixup_irqs as we do for IA64.
+	 */
+	local_irq_enable();
+	mdelay(1);
+
+	local_irq_disable();
+	remove_siblinginfo(cpu);
+
+	/* It's now safe to remove this processor from the online map */
+	remove_cpu_from_maps(cpu);
+	fixup_irqs(cpu_online_map);
+	return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	/* We don't do anything here: idle task is faking death itself. */
+	unsigned int i;
+
+	for (i = 0; i < 10; i++) {
+		/* They ack this in play_dead by setting CPU_DEAD */
+		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+			printk(KERN_INFO "CPU %d is now offline\n", cpu);
+			if (1 == num_online_cpus())
+				alternatives_smp_switch(0);
+			return;
+		}
+		msleep(100);
+	}
+	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int __cpu_disable(void)
+{
+	return -ENOSYS;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	/* We said "no" in __cpu_disable */
+	BUG();
+}
 #endif
 

arch/x86/kernel/smpboot_32.c

@@ -1040,73 +1040,6 @@ void __init native_smp_prepare_boot_cpu(void)
 	__get_cpu_var(cpu_state) = CPU_ONLINE;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref remove_cpu_from_maps(int cpu)
-{
-	cpu_clear(cpu, cpu_online_map);
-}
-
-int __cpu_disable(void)
-{
-	cpumask_t map = cpu_online_map;
-	int cpu = smp_processor_id();
-
-	/*
-	 * Perhaps use cpufreq to drop frequency, but that could go
-	 * into generic code.
- 	 *
-	 * We won't take down the boot processor on i386 due to some
-	 * interrupts only being able to be serviced by the BSP.
-	 * Especially so if we're not using an IOAPIC	-zwane
-	 */
-	if (cpu == 0)
-		return -EBUSY;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
-	clear_local_APIC();
-	/* Allow any queued timer interrupts to get serviced */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-
-	remove_siblinginfo(cpu);
-
-	remove_cpu_from_maps(cpu);
-	fixup_irqs(map);
-
-	return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We don't do anything here: idle task is faking death itself. */
-	unsigned int i;
-
-	for (i = 0; i < 10; i++) {
-		/* They ack this in play_dead by setting CPU_DEAD */
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-			printk ("CPU %d is now offline\n", cpu);
-			if (1 == num_online_cpus())
-				alternatives_smp_switch(0);
-			return;
-		}
-		msleep(100);
-	}
- 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
-{
-	return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We said "no" in __cpu_disable */
-	BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
 int __cpuinit native_cpu_up(unsigned int cpu)
 {
 	unsigned long flags;

arch/x86/kernel/smpboot_64.c

@@ -836,82 +836,3 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 	check_nmi_watchdog();
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref remove_cpu_from_maps(int cpu)
-{
-	cpu_clear(cpu, cpu_online_map);
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-	clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
-	clear_node_cpumask(cpu);
-}
-
-int __cpu_disable(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Perhaps use cpufreq to drop frequency, but that could go
-	 * into generic code.
- 	 *
-	 * We won't take down the boot processor on i386 due to some
-	 * interrupts only being able to be serviced by the BSP.
-	 * Especially so if we're not using an IOAPIC	-zwane
-	 */
-	if (cpu == 0)
-		return -EBUSY;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
-	clear_local_APIC();
-
-	/*
-	 * HACK:
-	 * Allow any queued timer interrupts to get serviced
-	 * This is only a temporary solution until we cleanup
-	 * fixup_irqs as we do for IA64.
-	 */
-	local_irq_enable();
-	mdelay(1);
-
-	local_irq_disable();
-	remove_siblinginfo(cpu);
-
-	/* It's now safe to remove this processor from the online map */
-	remove_cpu_from_maps(cpu);
-	fixup_irqs(cpu_online_map);
-	return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We don't do anything here: idle task is faking death itself. */
-	unsigned int i;
-
-	for (i = 0; i < 10; i++) {
-		/* They ack this in play_dead by setting CPU_DEAD */
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-			printk ("CPU %d is now offline\n", cpu);
-			if (1 == num_online_cpus())
-				alternatives_smp_switch(0);
-			return;
-		}
-		msleep(100);
-	}
- 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-
-#else /* ... !CONFIG_HOTPLUG_CPU */
-
-int __cpu_disable(void)
-{
-	return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We said "no" in __cpu_disable */
-	BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */

include/asm-x86/smp.h

@@ -70,6 +70,9 @@ void native_smp_prepare_cpus(unsigned int max_cpus);
 void native_smp_cpus_done(unsigned int max_cpus);
 int native_cpu_up(unsigned int cpunum);
 
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
 extern unsigned disabled_cpus;
 extern void prefill_possible_map(void);
 #endif

include/asm-x86/smp_32.h

@@ -34,9 +34,6 @@ DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
 #define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
 #endif
 
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
 /*
  * This function is needed by all SMP systems. It must _always_ be valid
  * from the initial startup. We map APIC_BASE very early in page_setup(),

include/asm-x86/smp_64.h

@@ -42,9 +42,6 @@ static inline int cpu_present_to_apicid(int mps_cpu)
 
 #define SMP_TRAMPOLINE_BASE 0x6000
 
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
 #define raw_smp_processor_id()	read_pda(cpunumber)
 #define cpu_physical_id(cpu)	per_cpu(x86_cpu_to_apicid, cpu)