Commit 6a9a4406 authored by Shawn Guo's avatar Shawn Guo Committed by Mark Brown

ASoC: zx-i2s: fix harsh noise with 16-bit audio

The audio parameter setup in zx_i2s_hw_params() works fine with 32-bit
samples, but for 16-bit ones, all we can hear is harsh noises.
As suggested by vendor driver code, DMA burst size and TS width should
always be 32 bits, no matter audio sample is 16-bit or 32-bit.

Follow the suggestion above to fix the harsh noise issue seen with
16-bit audio samples.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2ea659a9
...@@ -226,11 +226,12 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream, ...@@ -226,11 +226,12 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream,
struct zx_i2s_info *i2s = snd_soc_dai_get_drvdata(socdai); struct zx_i2s_info *i2s = snd_soc_dai_get_drvdata(socdai);
struct snd_dmaengine_dai_dma_data *dma_data; struct snd_dmaengine_dai_dma_data *dma_data;
unsigned int lane, ch_num, len, ret = 0; unsigned int lane, ch_num, len, ret = 0;
unsigned int ts_width = 32;
unsigned long val; unsigned long val;
unsigned long chn_cfg; unsigned long chn_cfg;
dma_data = snd_soc_dai_get_dma_data(socdai, substream); dma_data = snd_soc_dai_get_dma_data(socdai, substream);
dma_data->addr_width = params_width(params) >> 3; dma_data->addr_width = ts_width >> 3;
val = readl_relaxed(i2s->reg_base + ZX_I2S_TIMING_CTRL); val = readl_relaxed(i2s->reg_base + ZX_I2S_TIMING_CTRL);
val &= ~(ZX_I2S_TIMING_TS_WIDTH_MASK | ZX_I2S_TIMING_DATA_SIZE_MASK | val &= ~(ZX_I2S_TIMING_TS_WIDTH_MASK | ZX_I2S_TIMING_DATA_SIZE_MASK |
...@@ -251,7 +252,7 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream, ...@@ -251,7 +252,7 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream,
dev_err(socdai->dev, "Unknown data format\n"); dev_err(socdai->dev, "Unknown data format\n");
return -EINVAL; return -EINVAL;
} }
val |= ZX_I2S_TIMING_TS_WIDTH(len) | ZX_I2S_TIMING_DATA_SIZE(len); val |= ZX_I2S_TIMING_TS_WIDTH(ts_width) | ZX_I2S_TIMING_DATA_SIZE(len);
ch_num = params_channels(params); ch_num = params_channels(params);
switch (ch_num) { switch (ch_num) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment