regulator: tps65023: Fix mask for LDOs output voltage select control

According to the datasheet:
The LDO_CTRL registers are used to set the output voltage of LDO1 and LDO2.
LDO_CTRL[7] and LDO_CTRL[3] are reserved and should always be written to 0.

Thus the mask for TPS65023_LDO_1 and TPS65023_LDO_2 should be 0x07 and 0x70
respectively.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/tps65023-regulator.c

@@ -71,7 +71,7 @@
 
 /* LDO_CTRL bitfields */
 #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x07 << ((ldo_id)*4))
 
 /* Number of step-down converters available */
 #define TPS65023_NUM_DCDC		3