Merge tag 'kallsyms_show_value-fix-v5.9-rc1' of...

Merge tag 'kallsyms_show_value-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull sysfs module section fix from Kees Cook:
 "Fix sysfs module section output overflow.

  About a month after my kallsyms_show_value() refactoring landed, 0day
  noticed that there was a path through the kernfs binattr read handlers
  that did not have PAGE_SIZEd buffers, and the module "sections" read
  handler made a bad assumption about this, resulting in it stomping on
  memory when reached through small-sized splice() calls.

  I've added a set of tests to find these kinds of regressions more
  quickly in the future as well"
Sefltests-acked-by: Shuah Khan <skhan@linuxfoundation.org>

* tag 'kallsyms_show_value-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests: splice: Check behavior of full and short splices
  module: Correctly truncate sysfs sections output

kernel/module.c

@@ -1520,18 +1520,34 @@ struct module_sect_attrs {
 	struct module_sect_attr attrs[];
 };
 
+#define MODULE_SECT_READ_SIZE (3 /* "0x", "\n" */ + (BITS_PER_LONG / 4))
 static ssize_t module_sect_read(struct file *file, struct kobject *kobj,
 				struct bin_attribute *battr,
 				char *buf, loff_t pos, size_t count)
 {
 	struct module_sect_attr *sattr =
 		container_of(battr, struct module_sect_attr, battr);
+	char bounce[MODULE_SECT_READ_SIZE + 1];
+	size_t wrote;
 
 	if (pos != 0)
 		return -EINVAL;
 
-	return sprintf(buf, "0x%px\n",
-		       kallsyms_show_value(file->f_cred) ? (void *)sattr->address : NULL);
+	/*
+	 * Since we're a binary read handler, we must account for the
+	 * trailing NUL byte that sprintf will write: if "buf" is
+	 * too small to hold the NUL, or the NUL is exactly the last
+	 * byte, the read will look like it got truncated by one byte.
+	 * Since there is no way to ask sprintf nicely to not write
+	 * the NUL, we have to use a bounce buffer.
+	 */
+	wrote = scnprintf(bounce, sizeof(bounce), "0x%px\n",
+			 kallsyms_show_value(file->f_cred)
+				? (void *)sattr->address : NULL);
+	count = min(count, wrote);
+	memcpy(buf, bounce, count);
+
+	return count;
 }
 
 static void free_sect_attrs(struct module_sect_attrs *sect_attrs)
@@ -1580,7 +1596,7 @@ static void add_sect_attrs(struct module *mod, const struct load_info *info)
 			goto out;
 		sect_attrs->nsections++;
 		sattr->battr.read = module_sect_read;
-		sattr->battr.size = 3 /* "0x", "\n" */ + (BITS_PER_LONG / 4);
+		sattr->battr.size = MODULE_SECT_READ_SIZE;
 		sattr->battr.attr.mode = 0400;
 		*(gattr++) = &(sattr++)->battr;
 	}

tools/testing/selftests/splice/.gitignore

 # SPDX-License-Identifier: GPL-2.0-only
 default_file_splice_read
+splice_read

tools/testing/selftests/splice/Makefile

 # SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := default_file_splice_read.sh
-TEST_GEN_PROGS_EXTENDED := default_file_splice_read
+TEST_PROGS := default_file_splice_read.sh short_splice_read.sh
+TEST_GEN_PROGS_EXTENDED := default_file_splice_read splice_read
 
 include ../lib.mk

tools/testing/selftests/splice/config

+CONFIG_TEST_LKM=m

tools/testing/selftests/splice/settings

+timeout=5

tools/testing/selftests/splice/short_splice_read.sh

+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+set -e
+
+ret=0
+
+do_splice()
+{
+	filename="$1"
+	bytes="$2"
+	expected="$3"
+
+	out=$(./splice_read "$filename" "$bytes" | cat)
+	if [ "$out" = "$expected" ] ; then
+		echo "ok: $filename $bytes"
+	else
+		echo "FAIL: $filename $bytes"
+		ret=1
+	fi
+}
+
+test_splice()
+{
+	filename="$1"
+
+	full=$(cat "$filename")
+	two=$(echo "$full" | grep -m1 . | cut -c-2)
+
+	# Make sure full splice has the same contents as a standard read.
+	do_splice "$filename" 4096 "$full"
+
+	# Make sure a partial splice see the first two characters.
+	do_splice "$filename" 2 "$two"
+}
+
+# proc_single_open(), seq_read()
+test_splice /proc/$$/limits
+# special open, seq_read()
+test_splice /proc/$$/comm
+
+# proc_handler, proc_dointvec_minmax
+test_splice /proc/sys/fs/nr_open
+# proc_handler, proc_dostring
+test_splice /proc/sys/kernel/modprobe
+# proc_handler, special read
+test_splice /proc/sys/kernel/version
+
+if ! [ -d /sys/module/test_module/sections ] ; then
+	modprobe test_module
+fi
+# kernfs, attr
+test_splice /sys/module/test_module/coresize
+# kernfs, binattr
+test_splice /sys/module/test_module/sections/.init.text
+
+exit $ret

tools/testing/selftests/splice/splice_read.c

+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+int main(int argc, char *argv[])
+{
+	int fd;
+	size_t size;
+	ssize_t spliced;
+
+	if (argc < 2) {
+		fprintf(stderr, "Usage: %s INPUT [BYTES]\n", argv[0]);
+		return EXIT_FAILURE;
+	}
+
+	fd = open(argv[1], O_RDONLY);
+	if (fd < 0) {
+		perror(argv[1]);
+		return EXIT_FAILURE;
+	}
+
+	if (argc == 3)
+		size = atol(argv[2]);
+	else {
+		struct stat statbuf;
+
+		if (fstat(fd, &statbuf) < 0) {
+			perror(argv[1]);
+			return EXIT_FAILURE;
+		}
+
+		if (statbuf.st_size > INT_MAX) {
+			fprintf(stderr, "%s: Too big\n", argv[1]);
+			return EXIT_FAILURE;
+		}
+
+		size = statbuf.st_size;
+	}
+
+	/* splice(2) file to stdout. */
+	spliced = splice(fd, NULL, STDOUT_FILENO, NULL,
+		      size, SPLICE_F_MOVE);
+	if (spliced < 0) {
+		perror("splice");
+		return EXIT_FAILURE;
+	}
+
+	close(fd);
+	return EXIT_SUCCESS;
+}