Commit 6c5f860d authored by Frank Praznik's avatar Frank Praznik Committed by Jiri Kosina

HID: sony: Add Dualshock 4 Bluetooth battery and touchpad parsing

Add Dualshock 4 battery and touchpad parsing for Bluetooth reports.
Signed-off-by: default avatarFrank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent fdcf105d
......@@ -861,25 +861,34 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
unsigned long flags;
int n, offset = 35;
int n, offset;
__u8 cable_state, battery_capacity, battery_charging;
/* Battery and touchpad data starts at byte 30 in the USB report and
* 32 in Bluetooth report.
*/
offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;
/* The lower 4 bits of byte 30 contain the battery level
* and the 5th bit contains the USB cable state.
*/
cable_state = (rd[30] >> 4) & 0x01;
battery_capacity = rd[30] & 0x0F;
cable_state = (rd[offset] >> 4) & 0x01;
battery_capacity = rd[offset] & 0x0F;
/* On USB the Dualshock 4 battery level goes from 0 to 11.
* A battery level of 11 means fully charged.
/* When a USB power source is connected the battery level ranges from
* 0 to 10, and when running on battery power it ranges from 0 to 9.
* A battery level above 10 when plugged in means charge completed.
*/
if (cable_state && battery_capacity == 11)
if (!cable_state || battery_capacity > 10)
battery_charging = 0;
else
battery_charging = 1;
if (!cable_state)
battery_capacity++;
if (battery_capacity > 10)
battery_capacity--;
battery_capacity = 10;
battery_capacity *= 10;
spin_lock_irqsave(&sc->lock, flags);
......@@ -888,7 +897,10 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
sc->battery_charging = battery_charging;
spin_unlock_irqrestore(&sc->lock, flags);
/* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB.
offset += 5;
/* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
* and 37 on Bluetooth.
* The first 7 bits of the first byte is a counter and bit 8 is a touch
* indicator that is 0 when pressed and 1 when not pressed.
* The next 3 bytes are two 12 bit touch coordinates, X and Y.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment