Commit 6cbe0e1f authored by Olof Johansson's avatar Olof Johansson

Merge tag 'dt-3.12' of git://git.infradead.org/linux-mvebu into next/soc

From Jason Cooper:
mvebu dt changes for v3.12
 - kirkwood
    - add ZyXEL NSA310 board, fan for ReadyNAS Duo v2
 - mvebu
    - add ReadyNAS 102 board
 - misc dts updates and changes.

v2:
 - dropped mv64xxx-i2c change

* tag 'dt-3.12' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: Fix the Armada 370/XP timer compatible strings
  ARM: mvebu: use dts pre-processor for readynas 102
  ARM: kirkwood: use dts pre-processor for nsa310 boards
  ARM: mvebu: use correct #interrupt-cells instead of #interrupts-cells
  ARM: Kirkwood: Add support for another ZyXEL NSA310 variant
  ARM: mvebu: Add Netgear ReadyNAS 102 board
  arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/boot/dts/kirkwood-nsa310.dts
parents d519049c 5d3b8830
......@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
......@@ -100,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-rd.dtb \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
......
/*
* Device Tree file for NETGEAR ReadyNAS 102
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include "armada-370.dtsi"
/ {
model = "NETGEAR ReadyNAS 102";
compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
pinctrl {
power_led_pin: power-led-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
sata2_led_pin: sata2-led-pin {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
backup_led_pin: backup-led-pin {
marvell,pins = "mpp56";
marvell,function = "gpio";
};
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ethernet@74000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
usb@50000 {
status = "okay";
};
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
clock-frequency = <100000>;
status = "okay";
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
};
pcie-controller {
status = "okay";
/* Connected to Marvell SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
g762_clk: fixedclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
gpio_leds {
compatible = "gpio-leds";
pinctrl-0 = < &power_led_pin
&sata1_led_pin
&sata2_led_pin
&backup_led_pin >;
pinctrl-names = "default";
blue_power_led {
label = "rn102:blue:pwr";
gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */
linux,default-trigger = "heartbeat";
};
green_sata1_led {
label = "rn102:green:sata1";
gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */
default-state = "on";
};
green_sata2_led {
label = "rn102:green:sata2";
gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */
default-state = "on";
};
green_backup_led {
label = "rn102:green:backup";
gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */
default-state = "on";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 30 1>;
};
button@2 {
label = "Reset Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio0 6 1>;
};
button@3 {
label = "Backup Button";
linux,code = <133>; /* KEY_COPY */
gpios = <&gpio1 26 1>;
};
};
};
......@@ -138,10 +138,8 @@ serial@12100 {
};
timer@20300 {
compatible = "marvell,armada-370-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
clocks = <&coreclk 2>;
};
sata@a0000 {
......
......@@ -136,7 +136,7 @@ gpio0: gpio@18100 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
......@@ -147,7 +147,7 @@ gpio1: gpio@18140 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
......@@ -158,10 +158,15 @@ gpio2: gpio@18180 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <91>;
};
timer@20300 {
compatible = "marvell,armada-370-timer";
clocks = <&coreclk 2>;
};
coreclk: mvebu-sar@18230 {
compatible = "marvell,armada-370-core-clock";
reg = <0x18230 0x08>;
......
......@@ -181,7 +181,7 @@ gpio0: gpio@18100 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
......@@ -192,7 +192,7 @@ gpio1: gpio@18140 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
};
};
......
......@@ -203,7 +203,7 @@ gpio0: gpio@18100 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
......@@ -214,7 +214,7 @@ gpio1: gpio@18140 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
......@@ -225,7 +225,7 @@ gpio2: gpio@18180 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <91>;
};
......
......@@ -301,7 +301,7 @@ gpio0: gpio@18100 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
......@@ -312,7 +312,7 @@ gpio1: gpio@18140 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
......@@ -323,7 +323,7 @@ gpio2: gpio@18180 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
#interrupt-cells = <2>;
interrupts = <91>;
};
......
......@@ -69,7 +69,7 @@ serial@12300 {
};
timer@20300 {
marvell,timer-25Mhz;
compatible = "marvell,armada-xp-timer";
};
coreclk: mvebu-sar@18230 {
......
......@@ -63,6 +63,17 @@ pmx_led_blue_backup: pmx-led-blue-backup {
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
g762_clk: fixedclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
i2c@11000 {
status = "okay";
......@@ -70,6 +81,15 @@ rs5c372a: rs5c372a@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
clocks = <&g762_clk>; /* input clock */
fan_gear_mode = <0>;
fan_startv = <1>;
pwm_polarity = <0>;
};
};
serial@12000 {
......
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "ZyXEL NSA310";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio1 16 0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_off>;
pinctrl-names = "default";
usb0_power_off: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power Off";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 21 0>;
};
};
};
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
#include "kirkwood-nsa310-common.dtsi"
/ {
model = "ZyXEL NSA310";
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
......@@ -52,11 +50,6 @@ pmx_led_usb_red: pmx-led-usb-red {
marvell,function = "gpio";
};
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
......@@ -106,20 +99,6 @@ pmx_btn_power: pmx-btn-power {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
i2c@11000 {
......@@ -130,49 +109,6 @@ adt7476: adt7476a@2e {
reg = <0x2e>;
};
};
nand@3000000 {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
};
gpio_keys {
......@@ -249,30 +185,4 @@ red-copy {
gpios = <&gpio1 8 0>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio1 16 0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_off>;
pinctrl-names = "default";
usb0_power_off: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power Off";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 21 0>;
};
};
};
/dts-v1/;
#include "kirkwood-nsa310-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant does
* not have the red USB Led.
*/
/ {
compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_led_esata_red: pmx-led-esata-red {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_usb_green: pmx-led-usb-green {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_sys_red: pmx-led-sys-red {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_btn_copy: pmx-btn-copy {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_copy_green: pmx-led-copy-green {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_copy_red: pmx-led-copy-red {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_hdd_red: pmx-led-hdd-red {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_btn_power: pmx-btn-power {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm85: lm85@2e {
compatible = "lm85";
reg = <0x2e>;
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power Button";
linux,code = <116>;
gpios = <&gpio1 14 0>;
};
button@2 {
label = "Copy Button";
linux,code = <133>;
gpios = <&gpio1 5 1>;
};
button@3 {
label = "Reset Button";
linux,code = <0x198>;
gpios = <&gpio1 4 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 0>;
};
red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 0>;
};
green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 0>;
};
red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 0>;
};
green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 0>;
};
red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 0>;
};
green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 0>;
};
green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 0>;
};
red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 0>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment