drm/i915/display: Allow fastsets when DP_SDP_VSC infoframe do not match with PSR enabled

When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.

So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: default avatarGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
parent 9b2e49a1
......@@ -8315,6 +8315,16 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
} \
} while (0)
#define PIPE_CONF_CHECK_X_WITH_MASK(name, mask) do { \
if ((current_config->name & (mask)) != (pipe_config->name & (mask))) { \
pipe_config_mismatch(fastset, crtc, __stringify(name), \
"(expected 0x%08x, found 0x%08x)", \
current_config->name & (mask), \
pipe_config->name & (mask)); \
ret = false; \
} \
} while (0)
#define PIPE_CONF_CHECK_I(name) do { \
if (current_config->name != pipe_config->name) { \
pipe_config_mismatch(fastset, crtc, __stringify(name), \
......@@ -8661,7 +8671,12 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
PIPE_CONF_CHECK_I(min_voltage_level);
}
PIPE_CONF_CHECK_X(infoframes.enable);
if (fastset && (current_config->has_psr || pipe_config->has_psr))
PIPE_CONF_CHECK_X_WITH_MASK(infoframes.enable,
~intel_hdmi_infoframe_enable(DP_SDP_VSC));
else
PIPE_CONF_CHECK_X(infoframes.enable);
PIPE_CONF_CHECK_X(infoframes.gcp);
PIPE_CONF_CHECK_INFOFRAME(avi);
PIPE_CONF_CHECK_INFOFRAME(spd);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment