ASoC: stm32: add pm runtime support

Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:

	Enable support of pm runtime on STM32 SPDIFRX, I2S and DFSDM drivers
	to allow power state monitoring.

sound/soc/stm/stm32_adfsdm.c

@@ -12,7 +12,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
+#include <linux/pm_runtime.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/consumer.h>
 #include <linux/iio/adc/stm32-dfsdm-adc.h>
@@ -334,6 +334,8 @@ static int stm32_adfsdm_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(&pdev->dev, priv);
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = devm_snd_soc_register_component(&pdev->dev,
 					      &stm32_adfsdm_dai_component,
 					      &priv->dai_drv, 1);
@@ -373,6 +375,7 @@ static int stm32_adfsdm_probe(struct platform_device *pdev)
 static int stm32_adfsdm_remove(struct platform_device *pdev)
 {
 	snd_soc_unregister_component(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }

sound/soc/stm/stm32_i2s.c

@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/spinlock.h>
@@ -1113,6 +1114,7 @@ static int stm32_i2s_remove(struct platform_device *pdev)
 {
 	snd_dmaengine_pcm_unregister(&pdev->dev);
 	snd_soc_unregister_component(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
@@ -1150,6 +1152,8 @@ static int stm32_i2s_probe(struct platform_device *pdev)
 		return PTR_ERR(i2s->regmap);
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = snd_dmaengine_pcm_register(&pdev->dev, &stm32_i2s_pcm_config, 0);
 	if (ret) {
 		if (ret != -EPROBE_DEFER)

sound/soc/stm/stm32_spdifrx.c

@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
@@ -955,6 +956,7 @@ static int stm32_spdifrx_remove(struct platform_device *pdev)
 
 	snd_dmaengine_pcm_unregister(&pdev->dev);
 	snd_soc_unregister_component(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }
@@ -1010,6 +1012,8 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 	udelay(2);
 	reset_control_deassert(rst);
 
+	pm_runtime_enable(&pdev->dev);
+
 	pcm_config = &stm32_spdifrx_pcm_config;
 	ret = snd_dmaengine_pcm_register(&pdev->dev, pcm_config, 0);
 	if (ret) {