Bluetooth: Add USB ID 13D3:3487 to ath3k

[ Upstream commit 72f9f8b5 ]

Add hw id to ath3k usb device list and btusb blacklist

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3487 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Requires these firmwares:
ar3k/AthrBT_0x11020100.dfu and ar3k/ramps_0x11020100_40.dfu
Firmwares are available in linux-firmware.

Device found in a laptop ASUS model N552VW. It's an Atheros AR9462 chip.
Signed-off-by: Lauro Costa <lauro@polilinux.com.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

drivers/bluetooth/ath3k.c

@@ -122,6 +122,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3432) },
 	{ USB_DEVICE(0x13d3, 0x3472) },
 	{ USB_DEVICE(0x13d3, 0x3474) },
+	{ USB_DEVICE(0x13d3, 0x3487) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -188,6 +189,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -224,6 +224,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },