usb: gadget: renesas_usbhs: modify pipe sequence settings

renesas_usbhs can manually set DATA0/DATA1.
This patch is prepare for mod_host support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/renesas_usbhs/common.h

@@ -187,8 +187,9 @@ struct usbhs_priv;
 #define BSTS		(1 << 15)	/* Buffer Status */
 #define SUREQ		(1 << 14)	/* Sending SETUP Token */
 #define CSSTS		(1 << 12)	/* CSSTS Status */
-#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
+#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
+#define SQSET		(1 << 7)	/* Toggle Bit Set */
 #define PBUSY		(1 << 5)	/* Pipe Busy */
 #define PID_MASK	(0x3)		/* Response PID */
 #define  PID_NAK	0

drivers/usb/renesas_usbhs/mod_gadget.c

@@ -265,7 +265,7 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
 
 	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) {
 		usbhs_pipe_disable(pipe);
-		usbhs_pipe_clear_sequence(pipe);
+		usbhs_pipe_sequence_data0(pipe);
 		usbhs_pipe_enable(pipe);
 	}
 
@@ -479,7 +479,7 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	 */
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
-		usbhs_pipe_clear_sequence(uep->pipe);
+		usbhs_pipe_sequence_data0(uep->pipe);
 		return 0;
 	}
 

drivers/usb/renesas_usbhs/pipe.c

@@ -471,9 +471,12 @@ int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
 	return usbhsp_flags_has(pipe, IS_DIR_HOST);
 }
 
-void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data)
 {
-	usbhsp_pipectrl_set(pipe, SQCLR, SQCLR);
+	u16 mask = (SQCLR | SQSET);
+	u16 val = (data) ? SQSET : SQCLR;
+
+	usbhsp_pipectrl_set(pipe, mask, val);
 }
 
 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
@@ -584,7 +587,7 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
 	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
 
-	usbhs_pipe_clear_sequence(pipe);
+	usbhs_pipe_sequence_data0(pipe);
 
 	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
 		usbhs_pipe_number(pipe),

drivers/usb/renesas_usbhs/pipe.h

@@ -82,7 +82,6 @@ int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe);
 void usbhs_pipe_init(struct usbhs_priv *priv,
 		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map));
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
-void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe);
 void usbhs_pipe_clear(struct usbhs_pipe *pipe);
 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
 void usbhs_pipe_enable(struct usbhs_pipe *pipe);
@@ -92,6 +91,10 @@ void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
 			      u16 epnum, u16 maxp);
 
+#define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
+#define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data);
+
 #define usbhs_pipe_to_priv(p)	((p)->priv)
 #define usbhs_pipe_number(p)	(int)((p) - (p)->priv->pipe_info.pipe)
 #define usbhs_pipe_is_dcp(p)	((p)->priv->pipe_info.pipe == (p))