Commit 6e909283 authored by Nimrod Andy's avatar Nimrod Andy Committed by David S. Miller

net: fec: Add Scatter/gather support

Add Scatter/gather support for FEC.
This feature allows to improve outbound throughput performance.

Tested on imx6dl sabresd board:
Running iperf tests shows a 55.4% improvement.

$ ethtool -K eth0 sg off
$ iperf -c 10.192.242.167 -t 3 &
[  3] local 10.192.242.108 port 52618 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec  99.5 MBytes   278 Mbits/sec

$ ethtool -K eth0 sg on
$ iperf -c 10.192.242.167 -t 3 &
[  3] local 10.192.242.108 port 52617 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec   154 MBytes   432 Mbits/sec

CC: Li Frank <B20596@freescale.com>
Signed-off-by: default avatarFugang Duan <B38611@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 55d0218a
...@@ -221,7 +221,7 @@ struct bufdesc_ex { ...@@ -221,7 +221,7 @@ struct bufdesc_ex {
#define BD_ENET_TX_RCMASK ((ushort)0x003c) #define BD_ENET_TX_RCMASK ((ushort)0x003c)
#define BD_ENET_TX_UN ((ushort)0x0002) #define BD_ENET_TX_UN ((ushort)0x0002)
#define BD_ENET_TX_CSL ((ushort)0x0001) #define BD_ENET_TX_CSL ((ushort)0x0001)
#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ #define BD_ENET_TX_STATS ((ushort)0x0fff) /* All status bits */
/*enhanced buffer descriptor control/status used by Ethernet transmit*/ /*enhanced buffer descriptor control/status used by Ethernet transmit*/
#define BD_ENET_TX_INT 0x40000000 #define BD_ENET_TX_INT 0x40000000
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment