Commit 6f36a806 authored by Ben Dooks's avatar Ben Dooks

Merge branches 'for-33/i2c/eg20t' and 'for-33/i2c/omap' into for-linus/i2c-33

parents 8956dc10 6145197b
I2C for OMAP platforms
Required properties :
- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
Recommended properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
the default 100 kHz frequency will be used.
Optional properties:
- Child nodes conforming to i2c bus binding
Note: Current implementation will fetch base address, irq and dma
from omap hwmod data base during device registration.
Future plan is to migrate hwmod data base contents into device tree
blob so that, all the required data will be used from device tree dts
file.
Examples :
i2c1: i2c@0 {
compatible = "ti,omap3-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
clock-frequency = <400000>;
};
......@@ -37,6 +37,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
......@@ -182,7 +185,9 @@ struct omap_i2c_dev {
u32 latency; /* maximum mpu wkup latency */
void (*set_mpu_wkup_lat)(struct device *dev,
long latency);
u32 speed; /* Speed of bus in Khz */
u32 speed; /* Speed of bus in kHz */
u32 dtrev; /* extra revision from DT */
u32 flags;
u16 cmd_err;
u8 *buf;
u8 *regs;
......@@ -235,7 +240,7 @@ static const u8 reg_map_ip_v2[] = {
[OMAP_I2C_BUF_REG] = 0x94,
[OMAP_I2C_CNT_REG] = 0x98,
[OMAP_I2C_DATA_REG] = 0x9c,
[OMAP_I2C_SYSC_REG] = 0x20,
[OMAP_I2C_SYSC_REG] = 0x10,
[OMAP_I2C_CON_REG] = 0xa4,
[OMAP_I2C_OA_REG] = 0xa8,
[OMAP_I2C_SA_REG] = 0xac,
......@@ -266,11 +271,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
struct omap_i2c_bus_platform_data *pdata;
pdata = dev->dev->platform_data;
if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
......@@ -291,13 +292,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
struct omap_i2c_bus_platform_data *pdata;
u16 iv;
pdata = dev->dev->platform_data;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
if (pdata->rev == OMAP_I2C_IP_VERSION_2)
if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
......@@ -320,9 +318,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
unsigned long timeout;
unsigned long internal_clk = 0;
struct clk *fclk;
struct omap_i2c_bus_platform_data *pdata;
pdata = dev->dev->platform_data;
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
......@@ -373,7 +368,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
* The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420
......@@ -397,7 +392,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
psc = fclk_rate / 12000000;
}
if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/*
* HSI2C controller internal clk rate should be 19.2 Mhz for
......@@ -406,7 +401,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
* The filter is iclk (fclk for HS) period.
*/
if (dev->speed > 400 ||
pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200;
else if (dev->speed > 100)
internal_clk = 9600;
......@@ -475,7 +470,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
dev->errata = 0;
if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
......@@ -484,7 +479,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc;
dev->scllstate = scll;
dev->sclhstate = sclh;
......@@ -804,9 +799,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 bits;
u16 stat, w;
int err, count = 0;
struct omap_i2c_bus_platform_data *pdata;
pdata = dev->dev->platform_data;
if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
......@@ -830,11 +822,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
if (stat & OMAP_I2C_STAT_NACK) {
if (stat & OMAP_I2C_STAT_NACK)
err |= OMAP_I2C_STAT_NACK;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
OMAP_I2C_CON_STP);
}
if (stat & OMAP_I2C_STAT_AL) {
dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
......@@ -875,7 +865,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
if (pdata->flags &
if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
*dev->buf++ = w >> 8;
......@@ -918,7 +908,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
if (pdata->flags &
if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
w |= *dev->buf++ << 8;
......@@ -965,6 +955,32 @@ static const struct i2c_algorithm omap_i2c_algo = {
.functionality = omap_i2c_func,
};
#ifdef CONFIG_OF
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_i2c_bus_platform_data omap4_pdata = {
.rev = OMAP_I2C_IP_VERSION_2,
};
static const struct of_device_id omap_i2c_of_match[] = {
{
.compatible = "ti,omap4-i2c",
.data = &omap4_pdata,
},
{
.compatible = "ti,omap3-i2c",
.data = &omap3_pdata,
},
{ },
};
MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
#endif
static int __devinit
omap_i2c_probe(struct platform_device *pdev)
{
......@@ -972,9 +988,10 @@ omap_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem, *irq, *ioarea;
struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
irq_handler_t isr;
int r;
u32 speed = 0;
/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
......@@ -1001,15 +1018,24 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
if (pdata != NULL) {
speed = pdata->clkrate;
match = of_match_device(omap_i2c_of_match, &pdev->dev);
if (match) {
u32 freq = 100000; /* default to 100000 Hz */
pdata = match->data;
dev->dtrev = pdata->rev;
dev->flags = pdata->flags;
of_property_read_u32(node, "clock-frequency", &freq);
/* convert DT freq value in Hz into kHz for speed */
dev->speed = freq / 1000;
} else if (pdata != NULL) {
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
} else {
speed = 100; /* Default speed */
dev->set_mpu_wkup_lat = NULL;
dev->dtrev = pdata->rev;
}
dev->speed = speed;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
......@@ -1020,9 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
if (pdata->rev == OMAP_I2C_IP_VERSION_2)
if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
dev->regs = (u8 *)reg_map_ip_v2;
else
dev->regs = (u8 *)reg_map_ip_v1;
......@@ -1035,7 +1061,7 @@ omap_i2c_probe(struct platform_device *pdev)
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
/* Set up the fifo size - Get total size */
......@@ -1058,7 +1084,7 @@ omap_i2c_probe(struct platform_device *pdev)
/* calculate wakeup latency constraint for MPU */
if (dev->set_mpu_wkup_lat != NULL)
dev->latency = (1000000 * dev->fifo_size) /
(1000 * speed / 8);
(1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
......@@ -1074,7 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
}
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
pm_runtime_put(dev->dev);
......@@ -1085,6 +1111,7 @@ omap_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
/* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id;
......@@ -1094,6 +1121,8 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
of_i2c_register_devices(adap);
return 0;
err_free_irq:
......@@ -1166,6 +1195,7 @@ static struct platform_driver omap_i2c_driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
.pm = OMAP_I2C_PM_OPS,
.of_match_table = of_match_ptr(omap_i2c_of_match),
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment