ARM: dts: rockchip: Add pin names for rk3288-veyron fievel

This is like commit 0ca87bd5 ("ARM: dts: rockchip: Add pin names
for rk3288-veyron-jerry") and other similar commits, but for the
veyron fievel board (and tiger, which includes the fievel .dtsi).
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk3288-veyron-fievel.dts

@@ -204,6 +204,220 @@ &vcc_5v {
 	pinctrl-0 = <&drv_5v>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "HUB_USB1_nFALUT",
+			  "PHY_PMEB",
+
+			  "PHY_INT",
+			  "REC_MODE_L",
+			  "OTP_OUT",
+			  "",
+			  "USB_OTG_POWER_EN",
+			  "AP_WARM_RESET_H",
+			  "USB_OTG_nFALUT",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "DEVMODE_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "",
+			  "TOUCH_INT",
+			  "TOUCH_RST",
+
+			  "I2C3_SCL_TP",
+			  "I2C3_SDA_TP";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "VCC5V_GOOD_H",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "PHY_TXD2",
+			  "PHY_TXD3",
+			  "MAC_RXD2",
+			  "MAC_RXD3",
+			  "PHY_TXD0",
+			  "PHY_TXD1",
+			  "MAC_RXD0",
+			  "MAC_RXD1";
+};
+
+&gpio4 {
+	gpio-line-names = "MAC_MDC",
+			  "MAC_RXDV",
+			  "MAC_RXER",
+			  "MAC_CLK",
+			  "PHY_TXEN",
+			  "MAC_MDIO",
+			  "MAC_RXCLK",
+			  "",
+
+			  "PHY_RST",
+			  "PHY_TXCLK",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS_L",
+			  "UART0_RTS_L",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "USB_OTG_CTL1",
+			  "HUB_USB2_CTL1",
+			  "HUB_USB2_PWR_EN",
+			  "HUB_USB_ILIM_SEL",
+
+			  "USB_OTG_STATUS_L",
+			  "HUB_USB1_CTL1",
+			  "HUB_USB1_PWR_EN",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "HUB_USB2_nFALUT",
+			  "USB_OTG_ILIM_SEL";
+};
+
+&gpio7 {
+	gpio-line-names = "LCD_BL_PWM",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "PWR_LED1",
+			  "TPM_INT_H",
+			  "SPK_ON",
+			  "FW_WP_AP",
+			  "",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "",
+			  "EDP_HPD",
+			  "DVS1",
+			  "",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "HDMI_CEC",
+			  "I2C4_SDA",
+			  "I2C4_SCL",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <