Commit 6fa0fddd authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'timers-for-linus-hpet' of...

Merge branch 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hpet: Add reference to chipset erratum documentation for disable-hpet-msi-quirk
  x86, hpet: Restrict read back to affected ATI chipsets
parents 7d02093e fec84e33
......@@ -68,6 +68,7 @@ extern unsigned long force_hpet_address;
extern u8 hpet_blockid;
extern int hpet_force_user;
extern u8 hpet_msi_disable;
extern u8 hpet_readback_cmp;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
extern void hpet_disable(void);
......
......@@ -36,6 +36,7 @@
unsigned long hpet_address;
u8 hpet_blockid; /* OS timer block num */
u8 hpet_msi_disable;
u8 hpet_readback_cmp;
#ifdef CONFIG_PCI_MSI
static unsigned long hpet_num_timers;
......@@ -395,19 +396,23 @@ static int hpet_next_event(unsigned long delta,
* at that point and we would wait for the next hpet interrupt
* forever. We found out that reading the CMP register back
* forces the transfer so we can rely on the comparison with
* the counter register below. If the read back from the
* compare register does not match the value we programmed
* then we might have a real hardware problem. We can not do
* much about it here, but at least alert the user/admin with
* a prominent warning.
* An erratum on some chipsets (ICH9,..), results in comparator read
* immediately following a write returning old value. Workaround
* for this is to read this value second time, when first
* read returns old value.
* the counter register below.
*
* That works fine on those ATI chipsets, but on newer Intel
* chipsets (ICH9...) this triggers due to an erratum: Reading
* the comparator immediately following a write is returning
* the old value.
*
* We restrict the read back to the affected ATI chipsets (set
* by quirks) and also run it with hpet=verbose for debugging
* purposes.
*/
if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
KERN_WARNING "hpet: compare register read back failed.\n");
if (hpet_readback_cmp || hpet_verbose) {
u32 cmp = hpet_readl(HPET_Tn_CMP(timer));
if (cmp != cnt)
printk_once(KERN_WARNING
"hpet: compare register read back failed.\n");
}
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
......
......@@ -495,10 +495,18 @@ void force_hpet_resume(void)
/*
* HPET MSI on some boards (ATI SB700/SB800) has side effect on
* floppy DMA. Disable HPET MSI on such platforms.
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
*
* Also force the read back of the CMP register in hpet_next_event()
* to work around the problem that the CMP register write seems to be
* delayed. See hpet_next_event() for details.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = 1;
hpet_readback_cmp = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment