media: dvb-frontends/stv0910: make TS speed configurable

Add a tsspeed config option to struct stv0910_cfg which can be used by
users of the driver to set the (parallel) TS speed (higher speeds enable
support for higher bitrate transponders). If tsspeed isn't set in the
config, it'll default to a sane value.

This commit also updates the two consumers of the stv0910 driver (ngene
and ddbridge) to have a default tsspeed in their stv0910_cfg templates.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Tested-by: Helmut Auer <post@helmutauer.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/dvb-frontends/stv0910.c

@@ -1200,7 +1200,6 @@ static int probe(struct stv *state)
 	write_reg(state, RSTV0910_P1_TSCFGM, 0xC0); /* Manual speed */
 	write_reg(state, RSTV0910_P1_TSCFGL, 0x20);
 
-	/* Speed = 67.5 MHz */
 	write_reg(state, RSTV0910_P1_TSSPEED, state->tsspeed);
 
 	write_reg(state, RSTV0910_P2_TSCFGH, state->tscfgh | 0x01);
@@ -1208,7 +1207,6 @@ static int probe(struct stv *state)
 	write_reg(state, RSTV0910_P2_TSCFGM, 0xC0); /* Manual speed */
 	write_reg(state, RSTV0910_P2_TSCFGL, 0x20);
 
-	/* Speed = 67.5 MHz */
 	write_reg(state, RSTV0910_P2_TSSPEED, state->tsspeed);
 
 	/* Reset stream merger */
@@ -1790,7 +1788,8 @@ struct dvb_frontend *stv0910_attach(struct i2c_adapter *i2c,
 	state->tscfgh = 0x20 | (cfg->parallel ? 0 : 0x40);
 	state->tsgeneral = (cfg->parallel == 2) ? 0x02 : 0x00;
 	state->i2crpt = 0x0A | ((cfg->rptlvl & 0x07) << 4);
-	state->tsspeed = 0x28;
+	/* use safe tsspeed value if unspecified through stv0910_cfg */
+	state->tsspeed = (cfg->tsspeed ? cfg->tsspeed : 0x28);
 	state->nr = nr;
 	state->regoff = state->nr ? 0 : 0x200;
 	state->search_range = 16000000;

drivers/media/dvb-frontends/stv0910.h

@@ -10,6 +10,7 @@ struct stv0910_cfg {
 	u8  parallel;
 	u8  rptlvl;
 	u8  single;
+	u8  tsspeed;
 };
 
 #if IS_REACHABLE(CONFIG_DVB_STV0910)

drivers/media/pci/ddbridge/ddbridge-core.c

@@ -1183,6 +1183,7 @@ static const struct stv0910_cfg stv0910_p = {
 	.parallel = 1,
 	.rptlvl   = 4,
 	.clk      = 30000000,
+	.tsspeed  = 0x28,
 };
 
 static const struct lnbh25_config lnbh25_cfg = {

drivers/media/pci/ngene/ngene-cards.c

@@ -327,6 +327,7 @@ static struct stv0910_cfg stv0910_p = {
 	.parallel = 1,
 	.rptlvl   = 4,
 	.clk      = 30000000,
+	.tsspeed  = 0x28,
 };
 
 static struct lnbh25_config lnbh25_cfg = {