Commit 70c0d5b7 authored by Lucas Stach's avatar Lucas Stach Committed by Thierry Reding

drm/panel: simple: add support for AUO P320HVN03

This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de
parent 4177fa66
AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
Required properties:
- compatible: should be "auo,p320hvn03"
- power-supply: as specified in the base binding
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
......@@ -638,6 +638,34 @@ static const struct panel_desc auo_g185han01 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
};
static const struct display_timing auo_p320hvn03_timings = {
.pixelclock = { 106000000, 148500000, 164000000 },
.hactive = { 1920, 1920, 1920 },
.hfront_porch = { 25, 50, 130 },
.hback_porch = { 25, 50, 130 },
.hsync_len = { 20, 40, 105 },
.vactive = { 1080, 1080, 1080 },
.vfront_porch = { 8, 17, 150 },
.vback_porch = { 8, 17, 150 },
.vsync_len = { 4, 11, 100 },
};
static const struct panel_desc auo_p320hvn03 = {
.timings = &auo_p320hvn03_timings,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 698,
.height = 393,
},
.delay = {
.prepare = 1,
.enable = 450,
.unprepare = 500,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
};
static const struct drm_display_mode auo_t215hvn01_mode = {
.clock = 148800,
.hdisplay = 1920,
......@@ -1940,6 +1968,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,g185han01",
.data = &auo_g185han01,
}, {
.compatible = "auo,p320hvn03",
.data = &auo_p320hvn03,
}, {
.compatible = "auo,t215hvn01",
.data = &auo_t215hvn01,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment