Commit 71eeba16 authored by Marcel Apfelbaum's avatar Marcel Apfelbaum Committed by Roland Dreier

IB: Add new InfiniBand link speeds

Introduce support for the following extended speeds:

FDR-10: a Mellanox proprietary link speed which is 10.3125 Gbps with
        64b/66b encoding rather than 8b/10b encoding.
FDR:    IBA extended speed 14.0625 Gbps.
EDR:    IBA extended speed 25.78125 Gbps.
Signed-off-by: default avatarMarcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: default avatarHal Rosenstock <hal@mellanox.com>
Reviewed-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
parent 976d1676
......@@ -185,17 +185,35 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused,
if (ret)
return ret;
rate = (25 * attr.active_speed) / 10;
switch (attr.active_speed) {
case 2: speed = " DDR"; break;
case 4: speed = " QDR"; break;
case 2:
speed = " DDR";
break;
case 4:
speed = " QDR";
break;
case 8:
speed = " FDR10";
rate = 10;
break;
case 16:
speed = " FDR";
rate = 14;
break;
case 32:
speed = " EDR";
rate = 25;
break;
}
rate = 25 * ib_width_enum_to_int(attr.active_width) * attr.active_speed;
rate *= ib_width_enum_to_int(attr.active_width);
if (rate < 0)
return -EINVAL;
return sprintf(buf, "%d%s Gb/sec (%dX%s)\n",
rate / 10, rate % 10 ? ".5" : "",
rate, (attr.active_speed == 1) ? ".5" : "",
ib_width_enum_to_int(attr.active_width), speed);
}
......
......@@ -77,6 +77,31 @@ enum ib_rate mult_to_ib_rate(int mult)
}
EXPORT_SYMBOL(mult_to_ib_rate);
int ib_rate_to_mbps(enum ib_rate rate)
{
switch (rate) {
case IB_RATE_2_5_GBPS: return 2500;
case IB_RATE_5_GBPS: return 5000;
case IB_RATE_10_GBPS: return 10000;
case IB_RATE_20_GBPS: return 20000;
case IB_RATE_30_GBPS: return 30000;
case IB_RATE_40_GBPS: return 40000;
case IB_RATE_60_GBPS: return 60000;
case IB_RATE_80_GBPS: return 80000;
case IB_RATE_120_GBPS: return 120000;
case IB_RATE_14_GBPS: return 14062;
case IB_RATE_56_GBPS: return 56250;
case IB_RATE_112_GBPS: return 112500;
case IB_RATE_168_GBPS: return 168750;
case IB_RATE_25_GBPS: return 25781;
case IB_RATE_100_GBPS: return 103125;
case IB_RATE_200_GBPS: return 206250;
case IB_RATE_300_GBPS: return 309375;
default: return -1;
}
}
EXPORT_SYMBOL(ib_rate_to_mbps);
enum rdma_transport_type
rdma_node_get_transport(enum rdma_node_type node_type)
{
......
......@@ -207,6 +207,7 @@ enum ib_port_cap_flags {
IB_PORT_SM_DISABLED = 1 << 10,
IB_PORT_SYS_IMAGE_GUID_SUP = 1 << 11,
IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP = 1 << 12,
IB_PORT_EXTENDED_SPEEDS_SUP = 1 << 14,
IB_PORT_CM_SUP = 1 << 16,
IB_PORT_SNMP_TUNNEL_SUP = 1 << 17,
IB_PORT_REINIT_SUP = 1 << 18,
......@@ -415,7 +416,15 @@ enum ib_rate {
IB_RATE_40_GBPS = 7,
IB_RATE_60_GBPS = 8,
IB_RATE_80_GBPS = 9,
IB_RATE_120_GBPS = 10
IB_RATE_120_GBPS = 10,
IB_RATE_14_GBPS = 11,
IB_RATE_56_GBPS = 12,
IB_RATE_112_GBPS = 13,
IB_RATE_168_GBPS = 14,
IB_RATE_25_GBPS = 15,
IB_RATE_100_GBPS = 16,
IB_RATE_200_GBPS = 17,
IB_RATE_300_GBPS = 18
};
/**
......@@ -426,6 +435,13 @@ enum ib_rate {
*/
int ib_rate_to_mult(enum ib_rate rate) __attribute_const__;
/**
* ib_rate_to_mbps - Convert the IB rate enum to Mbps.
* For example, IB_RATE_2_5_GBPS will be converted to 2500.
* @rate: rate to convert.
*/
int ib_rate_to_mbps(enum ib_rate rate) __attribute_const__;
/**
* mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate
* enum.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment