Commit 72053353 authored by Andrew Lunn's avatar Andrew Lunn Committed by Olof Johansson

ARM: orion: Fix USB phy for orion5x.

The patch "ARM: orion: Consolidate USB platform setup code.", commit
4fcd3f37 broke USB on TS-7800 and
other orion5x boards, because the wrong type of PHY was being passed
to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION
and all the others want EHCI_PHY_NA.

Allow the mach- code to tell the generic plat-orion code which USB PHY
enum to place into the platform data.

Version 2: Rebase to v3.3-rc2.
Reported-by: default avatarAmbroz Bizjak <ambrop7@gmail.com>
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarAmbroz Bizjak <ambrop7@gmail.com>
Acked-by: default avatarNicolas Pitre <nico@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent b0654037
......@@ -28,6 +28,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
......@@ -71,7 +72,7 @@ void __init dove_map_io(void)
****************************************************************************/
void __init dove_ehci0_init(void)
{
orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
......
......@@ -27,6 +27,7 @@
#include <plat/cache-feroceon-l2.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
......@@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
......
......@@ -19,6 +19,7 @@
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
......@@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void)
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
}
......
......@@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/orion_nand.h>
#include <plat/ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
......@@ -72,7 +73,8 @@ void __init orion5x_map_io(void)
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
EHCI_PHY_ORION);
}
......
......@@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low,
/*****************************************************************************
* EHCI
****************************************************************************/
static struct orion_ehci_data orion_ehci_data = {
.phy_version = EHCI_PHY_NA,
};
static struct orion_ehci_data orion_ehci_data;
static u64 ehci_dmamask = DMA_BIT_MASK(32);
......@@ -812,8 +809,10 @@ static struct platform_device orion_ehci = {
};
void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq)
unsigned long irq,
enum orion_ehci_phy_ver phy_version)
{
orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
......
......@@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low,
unsigned long irq_1);
void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq);
unsigned long irq,
enum orion_ehci_phy_ver phy_version);
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment