Commit 72345923 authored by Roland Vossen's avatar Roland Vossen Committed by Greg Kroah-Hartman

staging: brcm80211: removal of inactive d11 code

Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: default avatarRoland Vossen <rvossen@broadcom.com>
Reviewed-by: default avatarArend van Spriel <arend@broadcom.com>
Reviewed-by: default avatarBrett Rudley <brudley@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent aba0586c
......@@ -45,11 +45,10 @@ struct wlc_bsscfg;
#define WLC_MAX_WSEC_HW_KEYS(wlc) WSEC_MAX_RCMTA_KEYS
/* Max # of hardware TKIP MIC keys supported */
#define WLC_MAX_TKMIC_HW_KEYS(wlc) ((D11REV_GE((wlc)->pub->corerev, 13)) ? \
WSEC_MAX_TKMIC_ENGINE_KEYS : 0)
#define WLC_MAX_TKMIC_HW_KEYS(wlc) (WSEC_MAX_TKMIC_ENGINE_KEYS)
#define WSEC_HW_TKMIC_KEY(wlc, key, bsscfg) \
(((D11REV_GE((wlc)->pub->corerev, 13)) && ((wlc)->machwcap & MCAP_TKIPMIC)) && \
((((wlc)->machwcap & MCAP_TKIPMIC)) && \
(key) && ((key)->algo == CRYPTO_ALGO_TKIP) && \
!WSEC_SOFTKEY(wlc, key, bsscfg) && \
WSEC_KEY_INDEX(wlc, key) >= WLC_DEFAULT_KEYS && \
......
......@@ -457,7 +457,7 @@ void wlc_init(struct wlc_info *wlc)
wlc_bmac_init(wlc->hw, chanspec, mute);
wlc->seckeys = wlc_bmac_read_shm(wlc->hw, M_SECRXKEYS_PTR) * 2;
if (D11REV_GE(wlc->pub->corerev, 15) && (wlc->machwcap & MCAP_TKIPMIC))
if (wlc->machwcap & MCAP_TKIPMIC)
wlc->tkmickeys =
wlc_bmac_read_shm(wlc->hw, M_TKMICKEYS_PTR) * 2;
......@@ -547,8 +547,7 @@ void wlc_init(struct wlc_info *wlc)
wlc->tx_suspended = false;
/* enable the RF Disable Delay timer */
if (D11REV_GE(wlc->pub->corerev, 10))
W_REG(wlc->osh, &wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
W_REG(wlc->osh, &wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
/* initialize mpc delay */
wlc->mpc_delay_off = wlc->mpc_dlycnt = WLC_MPC_MIN_DELAYCNT;
......@@ -3486,15 +3485,8 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len,
break;
}
/* 4322 supports antdiv in phy, no need to set it to ucode */
if (WLCISNPHY(wlc->band)
&& D11REV_IS(wlc->pub->corerev, 16)) {
WL_ERROR("wl%d: can't set ucantdiv for 4322\n",
wlc->pub->unit);
bcmerror = BCME_UNSUPPORTED;
} else
wlc_mhf(wlc, MHF1, MHF1_ANTDIV,
(val ? MHF1_ANTDIV : 0), WLC_BAND_AUTO);
wlc_mhf(wlc, MHF1, MHF1_ANTDIV,
(val ? MHF1_ANTDIV : 0), WLC_BAND_AUTO);
break;
}
#endif /* defined(BCMDBG) */
......@@ -6162,16 +6154,13 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
*/
txh->TxStatus = htol16(status);
if (D11REV_GE(wlc->pub->corerev, 16)) {
/* extra fields for ucode AMPDU aggregation, the new fields are added to
* the END of previous structure so that it's compatible in driver.
* In old rev ucode, these fields should be ignored
*/
txh->MaxNMpdus = htol16(0);
txh->MaxABytes_MRT = htol16(0);
txh->MaxABytes_FBR = htol16(0);
txh->MinMBytes = htol16(0);
}
/* extra fields for ucode AMPDU aggregation, the new fields are added to
* the END of previous structure so that it's compatible in driver.
*/
txh->MaxNMpdus = htol16(0);
txh->MaxABytes_MRT = htol16(0);
txh->MaxABytes_FBR = htol16(0);
txh->MinMBytes = htol16(0);
/* (5) RTS/CTS: determine RTS/CTS PLCP header and MAC duration, furnish d11txh_t */
/* RTS PLCP header and RTS frame */
......@@ -6597,28 +6586,7 @@ static void *wlc_15420war(struct wlc_info *wlc, uint queue)
ASSERT(queue < NFIFO);
if ((D11REV_IS(wlc->pub->corerev, 4))
|| (D11REV_GT(wlc->pub->corerev, 6)))
return NULL;
di = wlc->hw->di[queue];
ASSERT(di != NULL);
/* get next packet, ignoring XmtStatus.Curr */
p = dma_getnexttxp(di, HNDDMA_RANGE_ALL);
/* sw block tx dma */
dma_txblock(di);
/* if tx ring is now empty, reset and re-init the tx dma channel */
if (dma_txactive(wlc->hw->di[queue]) == 0) {
wlc->pub->_cnt->txdmawar++;
if (!dma_txreset(di))
WL_ERROR("wl%d: %s: dma_txreset[%d]: cannot stop dma\n",
wlc->pub->unit, __func__, queue);
dma_txinit(di);
}
return p;
return NULL;
}
static void wlc_war16165(struct wlc_info *wlc, bool tx)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment