[media] dvb-frontends/cxd2841er: do I2C reads in one go

Doing the I2C read operation with two calls to i2c_transfer() causes the
exclusive I2C bus lock of the underlying adapter to be released. While this
isn't an issue if only one demodulator is attached to the bus, having two
or even more causes troubles in that concurrent accesses to the different
demods will cause all kinds of issues due to wrong data being returned on
read operations (for example, the TS config register will be set wrong).
This changes the read_regs() function to do the operation in one go (by
calling i2c_transfer with the whole msg list instead of one by one) to not
loose the I2C bus lock, fixing all sorts of random runtime failures.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/dvb-frontends/cxd2841er.c

@@ -282,17 +282,8 @@ static int cxd2841er_read_regs(struct cxd2841er_priv *priv,
 		}
 	};
 
-	ret = i2c_transfer(priv->i2c, &msg[0], 1);
-	if (ret >= 0 && ret != 1)
-		ret = -EIO;
-	if (ret < 0) {
-		dev_warn(&priv->i2c->dev,
-			"%s: i2c rw failed=%d addr=%02x reg=%02x\n",
-			KBUILD_MODNAME, ret, i2c_addr, reg);
-		return ret;
-	}
-	ret = i2c_transfer(priv->i2c, &msg[1], 1);
-	if (ret >= 0 && ret != 1)
+	ret = i2c_transfer(priv->i2c, msg, 2);
+	if (ret >= 0 && ret != 2)
 		ret = -EIO;
 	if (ret < 0) {
 		dev_warn(&priv->i2c->dev,