Commit 7285fae9 authored by Guenter Roeck's avatar Guenter Roeck Committed by Wim Van Sebroeck

watchdog: Remove drivers for W83697HF and W83697UG

Since both chips are now supported by the w83627hf watchdog driver,
the chip specific drivers are no longer needed and can be removed.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent be281588
......@@ -940,36 +940,6 @@ config W83627HF_WDT
Most people will say N.
config W83697HF_WDT
tristate "W83697HF/W83697HG Watchdog Timer"
depends on X86
---help---
This is the driver for the hardware watchdog on the W83697HF/HG
chipset as used in Dedibox/VIA motherboards (and likely others).
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
amount of time.
To compile this driver as a module, choose M here: the
module will be called w83697hf_wdt.
Most people will say N.
config W83697UG_WDT
tristate "W83697UG/W83697UF Watchdog Timer"
depends on X86
---help---
This is the driver for the hardware watchdog on the W83697UG/UF
chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
amount of time.
To compile this driver as a module, choose M here: the
module will be called w83697ug_wdt.
Most people will say N.
config W83877F_WDT
tristate "W83877F (EMACS) Watchdog Timer"
depends on X86
......
......@@ -107,8 +107,6 @@ obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
obj-$(CONFIG_VIA_WDT) += via_wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
obj-$(CONFIG_W83697UG_WDT) += w83697ug_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
......
This diff is collapsed.
/*
* w83697ug/uf WDT driver
*
* (c) Copyright 2008 Flemming Fransen <ff@nrvissing.net>
* reused original code to support w83697ug/uf.
*
* Based on w83627hf_wdt.c which is based on advantechwdt.c
* which is based on wdt.c.
* Original copyright messages:
*
* (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
* added support for W83627THF.
*
* (c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
* (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
* http://www.redhat.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@redhat.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#define WATCHDOG_NAME "w83697ug/uf WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static unsigned long wdt_is_open;
static char expect_close;
static DEFINE_SPINLOCK(io_lock);
static int wdt_io = 0x2e;
module_param(wdt_io, int, 0);
MODULE_PARM_DESC(wdt_io, "w83697ug/uf WDT io port (default 0x2e)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 1<= timeout <=255 (default="
__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Kernel methods.
*/
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
(same as EFER) */
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
static int w83697ug_select_wd_register(void)
{
unsigned char c;
unsigned char version;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
outb(0x20, WDT_EFER); /* check chip version */
version = inb(WDT_EFDR);
if (version == 0x68) { /* W83697UG */
pr_info("Watchdog chip version 0x%02x = W83697UG/UF found at 0x%04x\n",
version, wdt_io);
outb_p(0x2b, WDT_EFER);
c = inb_p(WDT_EFDR); /* select WDT0 */
c &= ~0x04;
outb_p(0x2b, WDT_EFER);
outb_p(c, WDT_EFDR); /* set pin118 to WDT0 */
} else {
pr_err("No W83697UG/UF could be found\n");
return -ENODEV;
}
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
outb_p(0x30, WDT_EFER); /* select CR30 */
c = inb_p(WDT_EFDR);
outb_p(c | 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
return 0;
}
static void w83697ug_unselect_wd_register(void)
{
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
}
static int w83697ug_init(void)
{
int ret;
unsigned char t;
ret = w83697ug_select_wd_register();
if (ret != 0)
return ret;
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
timeout);
outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
}
outb_p(0xF5, WDT_EFER); /* Select CRF5 */
t = inb_p(WDT_EFDR); /* read CRF5 */
t &= ~0x0C; /* set second mode &
disable keyboard turning off watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
w83697ug_unselect_wd_register();
return 0;
}
static void wdt_ctrl(int timeout)
{
spin_lock(&io_lock);
if (w83697ug_select_wd_register() < 0) {
spin_unlock(&io_lock);
return;
}
outb_p(0xF4, WDT_EFER); /* Select CRF4 */
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
w83697ug_unselect_wd_register();
spin_unlock(&io_lock);
}
static int wdt_ping(void)
{
wdt_ctrl(timeout);
return 0;
}
static int wdt_disable(void)
{
wdt_ctrl(0);
return 0;
}
static int wdt_set_heartbeat(int t)
{
if (t < 1 || t > 255)
return -EINVAL;
timeout = t;
return 0;
}
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
expect_close = 0;
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
expect_close = 42;
}
}
wdt_ping();
}
return count;
}
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_timeout;
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "W83697UG WDT",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
if (copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_SETOPTIONS:
{
int options, retval = -EINVAL;
if (get_user(options, p))
return -EFAULT;
if (options & WDIOS_DISABLECARD) {
wdt_disable();
retval = 0;
}
if (options & WDIOS_ENABLECARD) {
wdt_ping();
retval = 0;
}
return retval;
}
case WDIOC_KEEPALIVE:
wdt_ping();
break;
case WDIOC_SETTIMEOUT:
if (get_user(new_timeout, p))
return -EFAULT;
if (wdt_set_heartbeat(new_timeout))
return -EINVAL;
wdt_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, p);
default:
return -ENOTTY;
}
return 0;
}
static int wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
/*
* Activate
*/
wdt_ping();
return nonseekable_open(inode, file);
}
static int wdt_close(struct inode *inode, struct file *file)
{
if (expect_close == 42)
wdt_disable();
else {
pr_crit("Unexpected close, not stopping watchdog!\n");
wdt_ping();
}
expect_close = 0;
clear_bit(0, &wdt_is_open);
return 0;
}
/*
* Notifier for system down
*/
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
wdt_disable(); /* Turn the WDT off */
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
.unlocked_ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_close,
};
static struct miscdevice wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wdt_fops,
};
/*
* The WDT needs to learn about soft shutdowns in order to
* turn the timebomb registers off.
*/
static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
static int __init wdt_init(void)
{
int ret;
pr_info("WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising\n");
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
pr_info("timeout value must be 1<=timeout<=255, using %d\n",
WATCHDOG_TIMEOUT);
}
if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", wdt_io);
ret = -EIO;
goto out;
}
ret = w83697ug_init();
if (ret != 0)
goto unreg_regions;
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
pr_err("cannot register reboot notifier (err=%d)\n", ret);
goto unreg_regions;
}
ret = misc_register(&wdt_miscdev);
if (ret != 0) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto unreg_reboot;
}
pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
out:
return ret;
unreg_reboot:
unregister_reboot_notifier(&wdt_notifier);
unreg_regions:
release_region(wdt_io, 1);
goto out;
}
static void __exit wdt_exit(void)
{
misc_deregister(&wdt_miscdev);
unregister_reboot_notifier(&wdt_notifier);
release_region(wdt_io, 1);
}
module_init(wdt_init);
module_exit(wdt_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Flemming Frandsen <ff@nrvissing.net>");
MODULE_DESCRIPTION("w83697ug/uf WDT driver");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment