drm/msm/dpu: use drmm-managed allocation for dpu_encoder_phys

Change struct allocation of encoder's phys backend data to use
drmm_kzalloc(). This removes the need to perform any actions on encoder
destruction.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570051/
Link: https://lore.kernel.org/r/20231201211845.1026967-12-dmitry.baryshkov@linaro.org

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c

@@ -2179,6 +2179,7 @@ static void dpu_encoder_early_unregister(struct drm_encoder *encoder)
 }
 
 static int dpu_encoder_virt_add_phys_encs(
+		struct drm_device *dev,
 		struct msm_display_info *disp_info,
 		struct dpu_encoder_virt *dpu_enc,
 		struct dpu_enc_phys_init_params *params)
@@ -2200,7 +2201,7 @@ static int dpu_encoder_virt_add_phys_encs(
 
 
 	if (disp_info->intf_type == INTF_WB) {
-		enc = dpu_encoder_phys_wb_init(params);
+		enc = dpu_encoder_phys_wb_init(dev, params);
 
 		if (IS_ERR(enc)) {
 			DPU_ERROR_ENC(dpu_enc, "failed to init wb enc: %ld\n",
@@ -2211,7 +2212,7 @@ static int dpu_encoder_virt_add_phys_encs(
 		dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
 		++dpu_enc->num_phys_encs;
 	} else if (disp_info->is_cmd_mode) {
-		enc = dpu_encoder_phys_cmd_init(params);
+		enc = dpu_encoder_phys_cmd_init(dev, params);
 
 		if (IS_ERR(enc)) {
 			DPU_ERROR_ENC(dpu_enc, "failed to init cmd enc: %ld\n",
@@ -2222,7 +2223,7 @@ static int dpu_encoder_virt_add_phys_encs(
 		dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
 		++dpu_enc->num_phys_encs;
 	} else {
-		enc = dpu_encoder_phys_vid_init(params);
+		enc = dpu_encoder_phys_vid_init(dev, params);
 
 		if (IS_ERR(enc)) {
 			DPU_ERROR_ENC(dpu_enc, "failed to init vid enc: %ld\n",
@@ -2311,7 +2312,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 			break;
 		}
 
-		ret = dpu_encoder_virt_add_phys_encs(disp_info,
+		ret = dpu_encoder_virt_add_phys_encs(dpu_kms->dev, disp_info,
 				dpu_enc, &phys_params);
 		if (ret) {
 			DPU_ERROR_ENC(dpu_enc, "failed to add phys encs\n");

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h

@@ -281,22 +281,24 @@ struct dpu_encoder_wait_info {
  * @p:	Pointer to init params structure
  * Return: Error code or newly allocated encoder
  */
-struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
+struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p);
 
 /**
  * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder
+ * @dev:  Corresponding device for devres management
  * @p:	Pointer to init params structure
  * Return: Error code or newly allocated encoder
  */
-struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
+struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p);
 
 /**
  * dpu_encoder_phys_wb_init - initialize writeback encoder
+ * @dev:  Corresponding device for devres management
  * @init:	Pointer to init info structure with initialization params
  */
-struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p);
 
 /**

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c

@@ -13,6 +13,8 @@
 #include "dpu_trace.h"
 #include "disp/msm_disp_snapshot.h"
 
+#include <drm/drm_managed.h>
+
 #define DPU_DEBUG_CMDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \
 		(e) && (e)->base.parent ? \
 		(e)->base.parent->base.id : -1, \
@@ -558,14 +560,6 @@ static void dpu_encoder_phys_cmd_disable(struct dpu_encoder_phys *phys_enc)
 	phys_enc->enable_state = DPU_ENC_DISABLED;
 }
 
-static void dpu_encoder_phys_cmd_destroy(struct dpu_encoder_phys *phys_enc)
-{
-	struct dpu_encoder_phys_cmd *cmd_enc =
-		to_dpu_encoder_phys_cmd(phys_enc);
-
-	kfree(cmd_enc);
-}
-
 static void dpu_encoder_phys_cmd_prepare_for_kickoff(
 		struct dpu_encoder_phys *phys_enc)
 {
@@ -731,7 +725,6 @@ static void dpu_encoder_phys_cmd_init_ops(
 	ops->atomic_mode_set = dpu_encoder_phys_cmd_atomic_mode_set;
 	ops->enable = dpu_encoder_phys_cmd_enable;
 	ops->disable = dpu_encoder_phys_cmd_disable;
-	ops->destroy = dpu_encoder_phys_cmd_destroy;
 	ops->control_vblank_irq = dpu_encoder_phys_cmd_control_vblank_irq;
 	ops->wait_for_commit_done = dpu_encoder_phys_cmd_wait_for_commit_done;
 	ops->prepare_for_kickoff = dpu_encoder_phys_cmd_prepare_for_kickoff;
@@ -746,7 +739,7 @@ static void dpu_encoder_phys_cmd_init_ops(
 	ops->get_line_count = dpu_encoder_phys_cmd_get_line_count;
 }
 
-struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
+struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p)
 {
 	struct dpu_encoder_phys *phys_enc = NULL;
@@ -754,7 +747,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
 
 	DPU_DEBUG("intf\n");
 
-	cmd_enc = kzalloc(sizeof(*cmd_enc), GFP_KERNEL);
+	cmd_enc = drmm_kzalloc(dev, sizeof(*cmd_enc), GFP_KERNEL);
 	if (!cmd_enc) {
 		DPU_ERROR("failed to allocate\n");
 		return ERR_PTR(-ENOMEM);

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c

@@ -11,6 +11,8 @@
 #include "dpu_trace.h"
 #include "disp/msm_disp_snapshot.h"
 
+#include <drm/drm_managed.h>
+
 #define DPU_DEBUG_VIDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \
 		(e) && (e)->parent ? \
 		(e)->parent->base.id : -1, \
@@ -438,12 +440,6 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 		phys_enc->enable_state = DPU_ENC_ENABLING;
 }
 
-static void dpu_encoder_phys_vid_destroy(struct dpu_encoder_phys *phys_enc)
-{
-	DPU_DEBUG_VIDENC(phys_enc, "\n");
-	kfree(phys_enc);
-}
-
 static int dpu_encoder_phys_vid_wait_for_vblank(
 		struct dpu_encoder_phys *phys_enc)
 {
@@ -681,7 +677,6 @@ static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops)
 	ops->atomic_mode_set = dpu_encoder_phys_vid_atomic_mode_set;
 	ops->enable = dpu_encoder_phys_vid_enable;
 	ops->disable = dpu_encoder_phys_vid_disable;
-	ops->destroy = dpu_encoder_phys_vid_destroy;
 	ops->control_vblank_irq = dpu_encoder_phys_vid_control_vblank_irq;
 	ops->wait_for_commit_done = dpu_encoder_phys_vid_wait_for_commit_done;
 	ops->wait_for_vblank = dpu_encoder_phys_vid_wait_for_vblank;
@@ -694,7 +689,7 @@ static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops)
 	ops->get_frame_count = dpu_encoder_phys_vid_get_frame_count;
 }
 
-struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
+struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p)
 {
 	struct dpu_encoder_phys *phys_enc = NULL;
@@ -704,7 +699,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 		return ERR_PTR(-EINVAL);
 	}
 
-	phys_enc = kzalloc(sizeof(*phys_enc), GFP_KERNEL);
+	phys_enc = drmm_kzalloc(dev, sizeof(*phys_enc), GFP_KERNEL);
 	if (!phys_enc) {
 		DPU_ERROR("failed to create encoder due to memory allocation error\n");
 		return ERR_PTR(-ENOMEM);

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c

@@ -8,6 +8,7 @@
 #include <linux/debugfs.h>
 
 #include <drm/drm_framebuffer.h>
+#include <drm/drm_managed.h>
 
 #include "dpu_encoder_phys.h"
 #include "dpu_formats.h"
@@ -580,20 +581,6 @@ static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc)
 	phys_enc->enable_state = DPU_ENC_DISABLED;
 }
 
-/**
- * dpu_encoder_phys_wb_destroy - destroy writeback encoder
- * @phys_enc:	Pointer to physical encoder
- */
-static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc)
-{
-	if (!phys_enc)
-		return;
-
-	DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
-
-	kfree(phys_enc);
-}
-
 static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc,
 		struct drm_writeback_job *job)
 {
@@ -689,7 +676,6 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops)
 	ops->atomic_mode_set = dpu_encoder_phys_wb_atomic_mode_set;
 	ops->enable = dpu_encoder_phys_wb_enable;
 	ops->disable = dpu_encoder_phys_wb_disable;
-	ops->destroy = dpu_encoder_phys_wb_destroy;
 	ops->atomic_check = dpu_encoder_phys_wb_atomic_check;
 	ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done;
 	ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff;
@@ -705,9 +691,10 @@ static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops)
 
 /**
  * dpu_encoder_phys_wb_init - initialize writeback encoder
+ * @dev:  Corresponding device for devres management
  * @p:	Pointer to init info structure with initialization params
  */
-struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init(struct drm_device *dev,
 		struct dpu_enc_phys_init_params *p)
 {
 	struct dpu_encoder_phys *phys_enc = NULL;
@@ -720,7 +707,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
 		return ERR_PTR(-EINVAL);
 	}
 
-	wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL);
+	wb_enc = drmm_kzalloc(dev, sizeof(*wb_enc), GFP_KERNEL);
 	if (!wb_enc) {
 		DPU_ERROR("failed to allocate wb phys_enc enc\n");
 		return ERR_PTR(-ENOMEM);