Commit 731b4cac authored by David George's avatar David George Committed by Guenter Roeck

hwmon: Driver for MAX1668

This patch adds support for MAX1668 and compatible temperature sensors.
Signed-off-by: default avatarDavid George <david.george@ska.ac.za>
[guenter.roeck@ericsson.com: minor cleanup of probe error path]
Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
parent 02f8c6ae
Kernel driver max1668
=====================
Supported chips:
* Maxim MAX1668, MAX1805 and MAX1989
Prefix: 'max1668'
Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf
Author:
David George <david.george@ska.ac.za>
Description
-----------
This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989
chips.
The three devices are very similar, but the MAX1805 has a reduced feature
set; only two remote temperature inputs vs the four avaible on the other
two ICs.
The driver is able to distinguish between the devices and creates sysfs
entries as follows:
MAX1805, MAX1668 and MAX1989:
temp1_input ro local (ambient) temperature
temp1_max rw local temperature maximum threshold for alarm
temp1_max_alarm ro local temperature maximum threshold alarm
temp1_min rw local temperature minimum threshold for alarm
temp1_min_alarm ro local temperature minimum threshold alarm
temp2_input ro remote temperature 1
temp2_max rw remote temperature 1 maximum threshold for alarm
temp2_max_alarm ro remote temperature 1 maximum threshold alarm
temp2_min rw remote temperature 1 minimum threshold for alarm
temp2_min_alarm ro remote temperature 1 minimum threshold alarm
temp3_input ro remote temperature 2
temp3_max rw remote temperature 2 maximum threshold for alarm
temp3_max_alarm ro remote temperature 2 maximum threshold alarm
temp3_min rw remote temperature 2 minimum threshold for alarm
temp3_min_alarm ro remote temperature 2 minimum threshold alarm
MAX1668 and MAX1989 only:
temp4_input ro remote temperature 3
temp4_max rw remote temperature 3 maximum threshold for alarm
temp4_max_alarm ro remote temperature 3 maximum threshold alarm
temp4_min rw remote temperature 3 minimum threshold for alarm
temp4_min_alarm ro remote temperature 3 minimum threshold alarm
temp5_input ro remote temperature 4
temp5_max rw remote temperature 4 maximum threshold for alarm
temp5_max_alarm ro remote temperature 4 maximum threshold alarm
temp5_min rw remote temperature 4 minimum threshold for alarm
temp5_min_alarm ro remote temperature 4 minimum threshold alarm
Module Parameters
-----------------
* read_only: int
Set to non-zero if you wish to prevent write access to alarm thresholds.
......@@ -4120,6 +4120,13 @@ S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
MAX1668 TEMPERATURE SENSOR DRIVER
M: "David George" <david.george@ska.ac.za>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max1668
F: drivers/hwmon/max1668.c
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: lm-sensors@lm-sensors.org
......
......@@ -736,6 +736,16 @@ config SENSORS_MAX1619
This driver can also be built as a module. If so, the module
will be called max1619.
config SENSORS_MAX1668
tristate "Maxim MAX1668 and compatibles"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for MAX1668, MAX1989 and
MAX1805 chips.
This driver can also be built as a module. If so, the module
will be called max1668.
config SENSORS_MAX6639
tristate "Maxim MAX6639 sensor chip"
depends on I2C && EXPERIMENTAL
......
......@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX16065) += max16065.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment