Commit 73775b89 authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: bf548-ezkit: increase u-boot partition size

The BF54x processor has a ton of on-chip peripherals and in order to
support them all, the u-boot image is quite large.  So give it 512KiB
in all bootable flashes to make our lives easier.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 39d3c1ca
......@@ -837,8 +837,12 @@ static struct platform_device bfin_atapi_device = {
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
.name = "bootloader(nand)",
.offset = 0,
.size = 0x80000,
}, {
.name = "linux kernel(nand)",
.offset = MTDPART_OFS_APPEND,
.size = 4 * 1024 * 1024,
},
{
......@@ -901,7 +905,7 @@ static struct platform_device bf54x_sdh_device = {
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
.size = 0x40000,
.size = 0x80000,
.offset = 0,
}, {
.name = "linux kernel(nor)",
......@@ -943,7 +947,7 @@ static struct platform_device ezkit_flash_device = {
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
.size = 0x00040000,
.size = 0x00080000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment