[PATCH] at91_serial -> atmel_serial: Public definitions

Rename the following public definitions:
  * AT91_NR_UART -> ATMEL_MAX_UART
  * struct at91_uart_data -> struct atmel_uart_data
  * at91_default_console_device -> atmel_default_console_device
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/arm/mach-at91rm9200/devices.c

@@ -558,7 +558,7 @@ static struct resource dbgu_resources[] = {
 	},
 };
 
-static struct at91_uart_data dbgu_data = {
+static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
 };
@@ -593,7 +593,7 @@ static struct resource uart0_resources[] = {
 	},
 };
 
-static struct at91_uart_data uart0_data = {
+static struct atmel_uart_data uart0_data = {
 	.use_dma_tx	= 1,
 	.use_dma_rx	= 1,
 };
@@ -635,7 +635,7 @@ static struct resource uart1_resources[] = {
 	},
 };
 
-static struct at91_uart_data uart1_data = {
+static struct atmel_uart_data uart1_data = {
 	.use_dma_tx	= 1,
 	.use_dma_rx	= 1,
 };
@@ -676,7 +676,7 @@ static struct resource uart2_resources[] = {
 	},
 };
 
-static struct at91_uart_data uart2_data = {
+static struct atmel_uart_data uart2_data = {
 	.use_dma_tx	= 1,
 	.use_dma_rx	= 1,
 };
@@ -711,7 +711,7 @@ static struct resource uart3_resources[] = {
 	},
 };
 
-static struct at91_uart_data uart3_data = {
+static struct atmel_uart_data uart3_data = {
 	.use_dma_tx	= 1,
 	.use_dma_rx	= 1,
 };
@@ -733,8 +733,8 @@ static inline void configure_usart3_pins(void)
 	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
 }
 
-struct platform_device *at91_uarts[AT91_NR_UART];	/* the UARTs to use */
-struct platform_device *at91_default_console_device;	/* the serial console device */
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_init_serial(struct at91_uart_config *config)
 {
@@ -775,9 +775,9 @@ void __init at91_init_serial(struct at91_uart_config *config)
 	}
 
 	/* Set serial console device */
-	if (config->console_tty < AT91_NR_UART)
-		at91_default_console_device = at91_uarts[config->console_tty];
-	if (!at91_default_console_device)
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
 		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
@@ -785,7 +785,7 @@ void __init at91_add_device_serial(void)
 {
 	int i;
 
-	for (i = 0; i < AT91_NR_UART; i++) {
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}

arch/avr32/mach-at32ap/at32ap7000.c

@@ -615,11 +615,11 @@ struct platform_device *__init at32_add_device_usart(unsigned int id)
 	return pdev;
 }
 
-struct platform_device *at91_default_console_device;
+struct platform_device *atmel_default_console_device;
 
 void __init at32_setup_serial_console(unsigned int usart_id)
 {
-	at91_default_console_device = setup_usart(usart_id);
+	atmel_default_console_device = setup_usart(usart_id);
 }
 
 /* --------------------------------------------------------------------

drivers/serial/atmel_serial.c

@@ -113,7 +113,7 @@ struct at91_uart_port {
 	unsigned short		suspended;	/* is port suspended? */
 };
 
-static struct at91_uart_port at91_ports[AT91_NR_UART];
+static struct at91_uart_port at91_ports[ATMEL_MAX_UART];
 
 #ifdef SUPPORT_SYSRQ
 static struct console at91_console;
@@ -682,7 +682,7 @@ static struct uart_ops at91_pops = {
 static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev)
 {
 	struct uart_port *port = &at91_port->uart;
-	struct at91_uart_data *data = pdev->dev.platform_data;
+	struct atmel_uart_data *data = pdev->dev.platform_data;
 
 	port->iotype	= UPIO_MEM;
 	port->flags     = UPF_BOOT_AUTOCONF;
@@ -834,9 +834,9 @@ static struct console at91_console = {
  */
 static int __init at91_console_init(void)
 {
-	if (at91_default_console_device) {
-		add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL);
-		at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device);
+	if (atmel_default_console_device) {
+		add_preferred_console(AT91_DEVICENAME, atmel_default_console_device->id, NULL);
+		at91_init_port(&(at91_ports[atmel_default_console_device->id]), atmel_default_console_device);
 		register_console(&at91_console);
 	}
 
@@ -849,7 +849,7 @@ console_initcall(at91_console_init);
  */
 static int __init at91_late_console_init(void)
 {
-	if (at91_default_console_device && !(at91_console.flags & CON_ENABLED))
+	if (atmel_default_console_device && !(at91_console.flags & CON_ENABLED))
 		register_console(&at91_console);
 
 	return 0;
@@ -866,7 +866,7 @@ static struct uart_driver at91_uart = {
 	.dev_name		= AT91_DEVICENAME,
 	.major			= SERIAL_AT91_MAJOR,
 	.minor			= MINOR_START,
-	.nr			= AT91_NR_UART,
+	.nr			= ATMEL_MAX_UART,
 	.cons			= AT91_CONSOLE_DEVICE,
 };
 

include/asm-arm/arch-at91rm9200/board.h

@@ -97,10 +97,10 @@ struct at91_uart_config {
 	unsigned short	nr_tty;		/* number of serial tty's */
 	short		tty_map[];	/* map UART to tty number */
 };
-extern struct platform_device *at91_default_console_device;
+extern struct platform_device *atmel_default_console_device;
 extern void __init at91_init_serial(struct at91_uart_config *config);
 
-struct at91_uart_data {
+struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 };

include/asm-arm/arch-at91rm9200/hardware.h

@@ -44,7 +44,7 @@
 #define AT91_SRAM_VIRT_BASE	(AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
 
 /* Serial ports */
-#define AT91_NR_UART		5		/* 4 USART3's and one DBGU port */
+#define ATMEL_MAX_UART		5		/* 4 USART3's and one DBGU port */
 
 /* FLASH */
 #define AT91_FLASH_BASE		0x10000000	/* NCS0: Flash physical base address */

include/asm-avr32/arch-at32ap/board.h

@@ -9,8 +9,8 @@
 /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
 void at32_add_system_devices(void);
 
-#define AT91_NR_UART	4
-extern struct platform_device *at91_default_console_device;
+#define ATMEL_MAX_UART	4
+extern struct platform_device *atmel_default_console_device;
 
 struct platform_device *at32_add_device_usart(unsigned int id);