Skip to content

L
linux
Commit 73ee2946 authored by Mark Brown's avatar Mark Brown
Browse files
Options

regulator: arizona-ldo1: Support 1.8V mode 

Some Arizona device support a 1.8V output mode. Enable this in the driver.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 8a7f0c61
Hide whitespace changes
Inline Side-by-side
Showing with 125 additions and 1 deletion
drivers/mfd/wm5102-tables.c
View file @ 73ee2946
......@@ -775,6 +775,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */
{ 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */
{ 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */
{ 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */
{ 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */
{ 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */
{ 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */
......@@ -1564,6 +1565,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_RATE_ESTIMATOR_3:
case ARIZONA_RATE_ESTIMATOR_4:
case ARIZONA_RATE_ESTIMATOR_5:
case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
case ARIZONA_FLL1_CONTROL_1:
case ARIZONA_FLL1_CONTROL_2:
case ARIZONA_FLL1_CONTROL_3:
......@@ -1596,6 +1598,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
case ARIZONA_LDO1_CONTROL_1:
case ARIZONA_LDO1_CONTROL_2:
case ARIZONA_LDO2_CONTROL_1:
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
......
drivers/regulator/arizona-ldo1.c
View file @ 73ee2946
......@@ -34,6 +34,108 @@ struct arizona_ldo1 {
struct regulator_init_data init_data;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (selector == rdev->desc->n_voltages - 1)
return 1800000;
else
return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
}
static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
int sel;
sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages)
sel = rdev->desc->n_voltages - 1;
return sel;
}
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->arizona->regmap;
unsigned int val;
int ret;
if (sel == rdev->desc->n_voltages - 1)
val = ARIZONA_LDO1_HI_PWR;
else
val = 0;
ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
ARIZONA_LDO1_HI_PWR, val);
if (ret != 0)
return ret;
ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
ARIZONA_SUBSYS_MAX_FREQ, val);
if (ret != 0)
return ret;
if (val)
return 0;
val = sel << ARIZONA_LDO1_VSEL_SHIFT;
return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
ARIZONA_LDO1_VSEL_MASK, val);
}
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->arizona->regmap;
unsigned int val;
int ret;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
if (ret != 0)
return ret;
if (val & ARIZONA_LDO1_HI_PWR)
return rdev->desc->n_voltages - 1;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
if (ret != 0)
return ret;
return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
}
static struct regulator_ops arizona_ldo1_hc_ops = {
.list_voltage = arizona_ldo1_hc_list_voltage,
.map_voltage = arizona_ldo1_hc_map_voltage,
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_desc arizona_ldo1_hc = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_hc_ops,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
.min_uV = 900000,
.uV_step = 50000,
.n_voltages = 8,
.enable_time = 500,
.owner = THIS_MODULE,
};
static struct regulator_ops arizona_ldo1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
......@@ -81,6 +183,7 @@ static const struct regulator_init_data arizona_ldo1_default = {
static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_ldo1 *ldo1;
int ret;
......@@ -100,9 +203,11 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
*/
switch (arizona->type) {
case WM5102:
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
default:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
break;
}
......@@ -121,7 +226,7 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
else
config.init_data = &ldo1->init_data;
ldo1->regulator = regulator_register(&arizona_ldo1, &config);
ldo1->regulator = regulator_register(desc, &config);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
......
include/linux/mfd/arizona/registers.h
View file @ 73ee2946
......@@ -76,6 +76,7 @@
#define ARIZONA_RATE_ESTIMATOR_3 0x154
#define ARIZONA_RATE_ESTIMATOR_4 0x155
#define ARIZONA_RATE_ESTIMATOR_5 0x156
#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161
#define ARIZONA_FLL1_CONTROL_1 0x171
#define ARIZONA_FLL1_CONTROL_2 0x172
#define ARIZONA_FLL1_CONTROL_3 0x173
......@@ -110,6 +111,7 @@
#define ARIZONA_FLL2_GPIO_CLOCK 0x1AA
#define ARIZONA_MIC_CHARGE_PUMP_1 0x200
#define ARIZONA_LDO1_CONTROL_1 0x210
#define ARIZONA_LDO1_CONTROL_2 0x212
#define ARIZONA_LDO2_CONTROL_1 0x213
#define ARIZONA_MIC_BIAS_CTRL_1 0x218
#define ARIZONA_MIC_BIAS_CTRL_2 0x219
......@@ -1573,6 +1575,13 @@
#define ARIZONA_SAMPLE_RATE_DETECT_D_SHIFT 0 /* SAMPLE_RATE_DETECT_D - [4:0] */
#define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */
/*
* R353 (0x161) - Dynamic Frequency Scaling 1
*/
#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */
#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */
#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */
/*
* R369 (0x171) - FLL1 Control 1
*/
......@@ -1888,6 +1897,13 @@
#define ARIZONA_LDO1_ENA_SHIFT 0 /* LDO1_ENA */
#define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */
/*
* R530 (0x212) - LDO1 Control 2
*/
#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */
#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */
#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */
/*
* R531 (0x213) - LDO2 Control 1
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7