Commit 74638018 authored by Stefan Agner's avatar Stefan Agner Committed by Shawn Guo

ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators

Model the Carrier Board power distribution by adding a fixed 3.3V
and 5V regulator. The 3.3V regulator is connected to the backlight
as well as the display supply. The 5V regulator is used to supply
USB VBUS.
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent c9171bb5
...@@ -48,6 +48,7 @@ chosen { ...@@ -48,6 +48,7 @@ chosen {
panel: panel { panel: panel {
compatible = "edt,et057090dhu"; compatible = "edt,et057090dhu";
backlight = <&bl>; backlight = <&bl>;
power-supply = <&reg_3v3>;
port { port {
panel_in: endpoint { panel_in: endpoint {
...@@ -55,11 +56,27 @@ panel_in: endpoint { ...@@ -55,11 +56,27 @@ panel_in: endpoint {
}; };
}; };
}; };
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
}; };
&bl { &bl {
brightness-levels = <0 4 8 16 32 64 128 255>; brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>; default-brightness-level = <6>;
power-supply = <&reg_3v3>;
status = "okay"; status = "okay";
}; };
......
...@@ -57,6 +57,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus { ...@@ -57,6 +57,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-min-microvolt = <5000000>; regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
vin-supply = <&reg_5v0>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment