Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-12-18

Here's the first bluetooth-next pull request for the 4.16 kernel.

 - hci_ll: multiple cleanups & fixes
 - Remove Gustavo Padovan from the MAINTAINERS file
 - Support BLE Adversing while connected (if the controller can do it)
 - DT updates for TI chips
 - Various other smaller cleanups & fixes

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ti,wilink-st.txt → Documentation/devicetree/bindings/net/ti-bluetooth.txt

-TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+Texas Instruments Bluetooth Chips
+---------------------------------
+
+This documents the binding structure and common properties for serial
+attached TI Bluetooth devices. The following chips are included in this
+binding:
+
+* TI CC256x Bluetooth devices
+* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
 
 TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
 and GPS over what's called "shared transport". The shared transport is
 standard BT HCI protocol with additional channels for the other functions.
 
-These devices also have a separate WiFi interface as described in
+TI WiLink devices also have a separate WiFi interface as described in
 wireless/ti,wlcore.txt.
 
 This bindings follows the UART slave device binding in
@@ -12,6 +20,7 @@ This bindings follows the UART slave device binding in
 
 Required properties:
  - compatible: should be one of the following:
+    "ti,cc2560"
     "ti,wl1271-st"
     "ti,wl1273-st"
     "ti,wl1281-st"
@@ -32,6 +41,9 @@ Optional properties:
    See ../clocks/clock-bindings.txt for details.
  - clock-names : Must include the following entry:
    "ext_clock" (External clock provided to the TI combo chip).
+ - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address
+   with the most significant byte first (big-endian).
+ - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified)
 
 Example:
 
@@ -43,5 +55,7 @@ Example:
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		clocks = <&clk32k_wl18xx>;
 		clock-names = "ext_clock";
+		nvmem-cells = <&bd_address>;
+		nvmem-cell-names = "bd-address";
 	};
 };

MAINTAINERS

@@ -2689,7 +2689,6 @@ F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
 M:	Marcel Holtmann <marcel@holtmann.org>
-M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
@@ -2700,7 +2699,6 @@ F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
 M:	Marcel Holtmann <marcel@holtmann.org>
-M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/

drivers/bluetooth/Kconfig

@@ -31,6 +31,16 @@ config BT_HCIBTUSB
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
+config BT_HCIBTUSB_AUTOSUSPEND
+	bool "Enable USB autosuspend for Bluetooth USB devices by default"
+	depends on BT_HCIBTUSB
+	help
+	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
+	  default.
+
+	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
+	  on the kernel commandline.
+
 config BT_HCIBTUSB_BCM
 	bool "Broadcom protocol support"
 	depends on BT_HCIBTUSB

drivers/bluetooth/bluecard_cs.c

@@ -302,9 +302,7 @@ static void bluecard_write_wakeup(struct bluecard_info *info)
 			}
 
 			/* Wait until the command reaches the baseband */
-			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
-			schedule_timeout(HZ/10);
-			finish_wait(&wq, &wait);
+			mdelay(100);
 
 			/* Set baud on baseband */
 			info->ctrl_reg &= ~0x03;
@@ -316,9 +314,7 @@ static void bluecard_write_wakeup(struct bluecard_info *info)
 			outb(info->ctrl_reg, iobase + REG_CONTROL);
 
 			/* Wait before the next HCI packet can be send */
-			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
-			schedule_timeout(HZ);
-			finish_wait(&wq, &wait);
+			mdelay(1000);
 		}
 
 		if (len == skb->len) {

drivers/bluetooth/btqcomsmd.c

@@ -88,7 +88,8 @@ static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
 		break;
 	}
 
-	kfree_skb(skb);
+	if (!ret)
+		kfree_skb(skb);
 
 	return ret;
 }

drivers/bluetooth/btsdio.c

@@ -31,6 +31,7 @@
 #include <linux/errno.h>
 #include <linux/skbuff.h>
 
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 
@@ -292,6 +293,14 @@ static int btsdio_probe(struct sdio_func *func,
 		tuple = tuple->next;
 	}
 
+	/* BCM43341 devices soldered onto the PCB (non-removable) use an
+	 * uart connection for bluetooth, ignore the BT SDIO interface.
+	 */
+	if (func->vendor == SDIO_VENDOR_ID_BROADCOM &&
+	    func->device == SDIO_DEVICE_ID_BROADCOM_43341 &&
+	    !mmc_card_is_removable(func->card->host))
+		return -ENODEV;
+
 	data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

drivers/bluetooth/btusb.c

@@ -40,6 +40,7 @@
 
 static bool disable_scofix;
 static bool force_scofix;
+static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
 
 static bool reset = true;
 
@@ -3213,6 +3214,9 @@ static int btusb_probe(struct usb_interface *intf,
 	}
 #endif
 
+	if (enable_autosuspend)
+		usb_enable_autosuspend(data->udev);
+
 	err = hci_register_dev(hdev);
 	if (err < 0)
 		goto out_free_dev;
@@ -3425,6 +3429,9 @@ MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
 module_param(force_scofix, bool, 0644);
 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
 
+module_param(enable_autosuspend, bool, 0644);
+MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
+
 module_param(reset, bool, 0644);
 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
 

drivers/bluetooth/hci_bcm.c

@@ -939,6 +939,7 @@ static const struct acpi_device_id bcm_acpi_match[] = {
 	{ "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E72", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
 	{ "BCM2E7E", (kernel_ulong_t)&acpi_bcm_int_first_gpios },

drivers/bluetooth/hci_ll.c

@@ -53,9 +53,14 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 #include <linux/gpio/consumer.h>
+#include <linux/nvmem-consumer.h>
 
 #include "hci_uart.h"
 
+/* Vendor-specific HCI commands */
+#define HCI_VS_WRITE_BD_ADDR			0xfc06
+#define HCI_VS_UPDATE_UART_HCI_BAUDRATE		0xff36
+
 /* HCILL commands */
 #define HCILL_GO_TO_SLEEP_IND	0x30
 #define HCILL_GO_TO_SLEEP_ACK	0x31
@@ -86,6 +91,7 @@ struct ll_device {
 	struct serdev_device *serdev;
 	struct gpio_desc *enable_gpio;
 	struct clk *ext_clk;
+	bdaddr_t bdaddr;
 };
 
 struct ll_struct {
@@ -620,7 +626,7 @@ static int download_firmware(struct ll_device *lldev)
 		case ACTION_SEND_COMMAND:	/* action send */
 			bt_dev_dbg(lldev->hu.hdev, "S");
 			cmd = (struct hci_command *)action_ptr;
-			if (cmd->opcode == 0xff36) {
+			if (cmd->opcode == HCI_VS_UPDATE_UART_HCI_BAUDRATE) {
 				/* ignore remote change
 				 * baud rate HCI VS command
 				 */
@@ -628,11 +634,11 @@ static int download_firmware(struct ll_device *lldev)
 				break;
 			}
 			if (cmd->prefix != 1)
-				bt_dev_dbg(lldev->hu.hdev, "command type %d\n", cmd->prefix);
+				bt_dev_dbg(lldev->hu.hdev, "command type %d", cmd->prefix);
 
 			skb = __hci_cmd_sync(lldev->hu.hdev, cmd->opcode, cmd->plen, &cmd->speed, HCI_INIT_TIMEOUT);
 			if (IS_ERR(skb)) {
-				bt_dev_err(lldev->hu.hdev, "send command failed\n");
+				bt_dev_err(lldev->hu.hdev, "send command failed");
 				err = PTR_ERR(skb);
 				goto out_rel_fw;
 			}
@@ -659,6 +665,24 @@ static int download_firmware(struct ll_device *lldev)
 	return err;
 }
 
+static int ll_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	bdaddr_t bdaddr_swapped;
+	struct sk_buff *skb;
+
+	/* HCI_VS_WRITE_BD_ADDR (at least on a CC2560A chip) expects the BD
+	 * address to be MSB first, but bdaddr_t has the convention of being
+	 * LSB first.
+	 */
+	baswap(&bdaddr_swapped, bdaddr);
+	skb = __hci_cmd_sync(hdev, HCI_VS_WRITE_BD_ADDR, sizeof(bdaddr_t),
+			     &bdaddr_swapped, HCI_INIT_TIMEOUT);
+	if (!IS_ERR(skb))
+		kfree_skb(skb);
+
+	return PTR_ERR_OR_ZERO(skb);
+}
+
 static int ll_setup(struct hci_uart *hu)
 {
 	int err, retry = 3;
@@ -671,14 +695,20 @@ static int ll_setup(struct hci_uart *hu)
 
 	lldev = serdev_device_get_drvdata(serdev);
 
+	hu->hdev->set_bdaddr = ll_set_bdaddr;
+
 	serdev_device_set_flow_control(serdev, true);
 
 	do {
-		/* Configure BT_EN to HIGH state */
+		/* Reset the Bluetooth device */
 		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
 		msleep(5);
 		gpiod_set_value_cansleep(lldev->enable_gpio, 1);
-		msleep(100);
+		err = serdev_device_wait_for_cts(serdev, true, 200);
+		if (err) {
+			bt_dev_err(hu->hdev, "Failed to get CTS");
+			return err;
+		}
 
 		err = download_firmware(lldev);
 		if (!err)
@@ -691,6 +721,18 @@ static int ll_setup(struct hci_uart *hu)
 	if (err)
 		return err;
 
+	/* Set BD address if one was specified at probe */
+	if (!bacmp(&lldev->bdaddr, BDADDR_NONE)) {
+		/* This means that there was an error getting the BD address
+		 * during probe, so mark the device as having a bad address.
+		 */
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+	} else if (bacmp(&lldev->bdaddr, BDADDR_ANY)) {
+		err = ll_set_bdaddr(hu->hdev, &lldev->bdaddr);
+		if (err)
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+	}
+
 	/* Operational speed if any */
 	if (hu->oper_speed)
 		speed = hu->oper_speed;
@@ -700,7 +742,12 @@ static int ll_setup(struct hci_uart *hu)
 		speed = 0;
 
 	if (speed) {
-		struct sk_buff *skb = __hci_cmd_sync(hu->hdev, 0xff36, sizeof(speed), &speed, HCI_INIT_TIMEOUT);
+		__le32 speed_le = cpu_to_le32(speed);
+		struct sk_buff *skb;
+
+		skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+				     sizeof(speed_le), &speed_le,
+				     HCI_INIT_TIMEOUT);
 		if (!IS_ERR(skb)) {
 			kfree_skb(skb);
 			serdev_device_set_baudrate(serdev, speed);
@@ -716,6 +763,7 @@ static int hci_ti_probe(struct serdev_device *serdev)
 {
 	struct hci_uart *hu;
 	struct ll_device *lldev;
+	struct nvmem_cell *bdaddr_cell;
 	u32 max_speed = 3000000;
 
 	lldev = devm_kzalloc(&serdev->dev, sizeof(struct ll_device), GFP_KERNEL);
@@ -737,6 +785,52 @@ static int hci_ti_probe(struct serdev_device *serdev)
 	of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
 	hci_uart_set_speeds(hu, 115200, max_speed);
 
+	/* optional BD address from nvram */
+	bdaddr_cell = nvmem_cell_get(&serdev->dev, "bd-address");
+	if (IS_ERR(bdaddr_cell)) {
+		int err = PTR_ERR(bdaddr_cell);
+
+		if (err == -EPROBE_DEFER)
+			return err;
+
+		/* ENOENT means there is no matching nvmem cell and ENOSYS
+		 * means that nvmem is not enabled in the kernel configuration.
+		 */
+		if (err != -ENOENT && err != -ENOSYS) {
+			/* If there was some other error, give userspace a
+			 * chance to fix the problem instead of failing to load
+			 * the driver. Using BDADDR_NONE as a flag that is
+			 * tested later in the setup function.
+			 */
+			dev_warn(&serdev->dev,
+				 "Failed to get \"bd-address\" nvmem cell (%d)\n",
+				 err);
+			bacpy(&lldev->bdaddr, BDADDR_NONE);
+		}
+	} else {
+		bdaddr_t *bdaddr;
+		size_t len;
+
+		bdaddr = nvmem_cell_read(bdaddr_cell, &len);
+		nvmem_cell_put(bdaddr_cell);
+		if (IS_ERR(bdaddr)) {
+			dev_err(&serdev->dev, "Failed to read nvmem bd-address\n");
+			return PTR_ERR(bdaddr);
+		}
+		if (len != sizeof(bdaddr_t)) {
+			dev_err(&serdev->dev, "Invalid nvmem bd-address length\n");
+			kfree(bdaddr);
+			return -EINVAL;
+		}
+
+		/* As per the device tree bindings, the value from nvmem is
+		 * expected to be MSB first, but in the kernel it is expected
+		 * that bdaddr_t is LSB first.
+		 */
+		baswap(&lldev->bdaddr, bdaddr);
+		kfree(bdaddr);
+	}
+
 	return hci_uart_register_device(hu, &llp);
 }
 
@@ -748,6 +842,7 @@ static void hci_ti_remove(struct serdev_device *serdev)
 }
 
 static const struct of_device_id hci_ti_of_match[] = {
+	{ .compatible = "ti,cc2560" },
 	{ .compatible = "ti,wl1271-st" },
 	{ .compatible = "ti,wl1273-st" },
 	{ .compatible = "ti,wl1281-st" },

drivers/bluetooth/hci_qca.c

@@ -932,6 +932,9 @@ static int qca_setup(struct hci_uart *hu)
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		ret = 0;
 	}
 
 	/* Setup bdaddr */

drivers/bluetooth/hci_serdev.c

@@ -303,6 +303,7 @@ int hci_uart_register_device(struct hci_uart *hu,
 	hci_set_drvdata(hdev, hu);
 
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
+	percpu_init_rwsem(&hu->proto_lock);
 
 	/* Only when vendor specific setup callback is provided, consider
 	 * the manufacturer information valid. This avoids filling in the

net/bluetooth/af_bluetooth.c

@@ -766,43 +766,39 @@ static int __init bt_init(void)
 		return err;
 
 	err = sock_register(&bt_sock_family_ops);
-	if (err < 0) {
-		bt_sysfs_cleanup();
-		return err;
-	}
+	if (err)
+		goto cleanup_sysfs;
 
 	BT_INFO("HCI device and connection manager initialized");
 
 	err = hci_sock_init();
-	if (err < 0)
-		goto error;
+	if (err)
+		goto unregister_socket;
 
 	err = l2cap_init();
-	if (err < 0)
-		goto sock_err;
+	if (err)
+		goto cleanup_socket;
 
 	err = sco_init();
-	if (err < 0) {
-		l2cap_exit();
-		goto sock_err;
-	}
+	if (err)
+		goto cleanup_cap;
 
 	err = mgmt_init();
-	if (err < 0) {
-		sco_exit();
-		l2cap_exit();
-		goto sock_err;
-	}
+	if (err)
+		goto cleanup_sco;
 
 	return 0;
 
-sock_err:
+cleanup_sco:
+	sco_exit();
+cleanup_cap:
+	l2cap_exit();
+cleanup_socket:
 	hci_sock_cleanup();
-
-error:
+unregister_socket:
 	sock_unregister(PF_BLUETOOTH);
+cleanup_sysfs:
 	bt_sysfs_cleanup();
-
 	return err;
 }
 

net/bluetooth/hci_debugfs.c

@@ -88,6 +88,9 @@ static int __name ## _show(struct seq_file *f, void *ptr)		      \
 	return 0;							      \
 }									      \
 									      \
+DEFINE_SHOW_ATTRIBUTE(__name)
+
+#define DEFINE_SHOW_ATTRIBUTE(__name)					      \
 static int __name ## _open(struct inode *inode, struct file *file)	      \
 {									      \
 	return single_open(file, __name ## _show, inode->i_private);	      \
@@ -106,37 +109,16 @@ static int features_show(struct seq_file *f, void *ptr)
 	u8 p;
 
 	hci_dev_lock(hdev);
-	for (p = 0; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) {
-		seq_printf(f, "%2u: 0x%2.2x 0x%2.2x 0x%2.2x 0x%2.2x "
-			   "0x%2.2x 0x%2.2x 0x%2.2x 0x%2.2x\n", p,
-			   hdev->features[p][0], hdev->features[p][1],
-			   hdev->features[p][2], hdev->features[p][3],
-			   hdev->features[p][4], hdev->features[p][5],
-			   hdev->features[p][6], hdev->features[p][7]);
-	}
+	for (p = 0; p < HCI_MAX_PAGES && p <= hdev->max_page; p++)
+		seq_printf(f, "%2u: %8ph\n", p, hdev->features[p]);
 	if (lmp_le_capable(hdev))
-		seq_printf(f, "LE: 0x%2.2x 0x%2.2x 0x%2.2x 0x%2.2x "
-			   "0x%2.2x 0x%2.2x 0x%2.2x 0x%2.2x\n",
-			   hdev->le_features[0], hdev->le_features[1],
-			   hdev->le_features[2], hdev->le_features[3],
-			   hdev->le_features[4], hdev->le_features[5],
-			   hdev->le_features[6], hdev->le_features[7]);
+		seq_printf(f, "LE: %8ph\n", hdev->le_features);
 	hci_dev_unlock(hdev);
 
 	return 0;
 }
 
-static int features_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, features_show, inode->i_private);
-}
-
-static const struct file_operations features_fops = {
-	.open		= features_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(features);
 
 static int device_id_show(struct seq_file *f, void *ptr)
 {
@@ -150,17 +132,7 @@ static int device_id_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int device_id_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, device_id_show, inode->i_private);
-}
-
-static const struct file_operations device_id_fops = {
-	.open		= device_id_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(device_id);
 
 static int device_list_show(struct seq_file *f, void *ptr)
 {
@@ -180,17 +152,7 @@ static int device_list_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int device_list_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, device_list_show, inode->i_private);
-}
-
-static const struct file_operations device_list_fops = {
-	.open		= device_list_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(device_list);
 
 static int blacklist_show(struct seq_file *f, void *p)
 {
@@ -205,17 +167,7 @@ static int blacklist_show(struct seq_file *f, void *p)
 	return 0;
 }
 
-static int blacklist_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, blacklist_show, inode->i_private);
-}
-
-static const struct file_operations blacklist_fops = {
-	.open		= blacklist_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(blacklist);
 
 static int uuids_show(struct seq_file *f, void *p)
 {
@@ -240,17 +192,7 @@ static int uuids_show(struct seq_file *f, void *p)
        return 0;
 }
 
-static int uuids_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, uuids_show, inode->i_private);
-}
-
-static const struct file_operations uuids_fops = {
-	.open		= uuids_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(uuids);
 
 static int remote_oob_show(struct seq_file *f, void *ptr)
 {
@@ -269,17 +211,7 @@ static int remote_oob_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int remote_oob_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, remote_oob_show, inode->i_private);
-}
-
-static const struct file_operations remote_oob_fops = {
-	.open		= remote_oob_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(remote_oob);
 
 static int conn_info_min_age_set(void *data, u64 val)
 {
@@ -443,17 +375,7 @@ static int inquiry_cache_show(struct seq_file *f, void *p)
 	return 0;
 }
 
-static int inquiry_cache_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, inquiry_cache_show, inode->i_private);
-}
-
-static const struct file_operations inquiry_cache_fops = {
-	.open		= inquiry_cache_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(inquiry_cache);
 
 static int link_keys_show(struct seq_file *f, void *ptr)
 {
@@ -469,17 +391,7 @@ static int link_keys_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int link_keys_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, link_keys_show, inode->i_private);
-}
-
-static const struct file_operations link_keys_fops = {
-	.open		= link_keys_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(link_keys);
 
 static int dev_class_show(struct seq_file *f, void *ptr)
 {
@@ -493,17 +405,7 @@ static int dev_class_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int dev_class_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dev_class_show, inode->i_private);
-}
-
-static const struct file_operations dev_class_fops = {
-	.open		= dev_class_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(dev_class);
 
 static int voice_setting_get(void *data, u64 *val)
 {
@@ -692,17 +594,7 @@ static int identity_show(struct seq_file *f, void *p)
 	return 0;
 }
 
-static int identity_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, identity_show, inode->i_private);
-}
-
-static const struct file_operations identity_fops = {
-	.open		= identity_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(identity);
 
 static int rpa_timeout_set(void *data, u64 val)
 {
@@ -746,17 +638,7 @@ static int random_address_show(struct seq_file *f, void *p)
 	return 0;
 }
 
-static int random_address_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, random_address_show, inode->i_private);
-}
-
-static const struct file_operations random_address_fops = {
-	.open		= random_address_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(random_address);
 
 static int static_address_show(struct seq_file *f, void *p)
 {
@@ -769,17 +651,7 @@ static int static_address_show(struct seq_file *f, void *p)
 	return 0;
 }
 
-static int static_address_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, static_address_show, inode->i_private);
-}
-
-static const struct file_operations static_address_fops = {
-	.open		= static_address_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(static_address);
 
 static ssize_t force_static_address_read(struct file *file,
 					 char __user *user_buf,
@@ -841,17 +713,7 @@ static int white_list_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int white_list_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, white_list_show, inode->i_private);
-}
-
-static const struct file_operations white_list_fops = {
-	.open		= white_list_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(white_list);
 
 static int identity_resolving_keys_show(struct seq_file *f, void *ptr)
 {
@@ -869,18 +731,7 @@ static int identity_resolving_keys_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int identity_resolving_keys_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, identity_resolving_keys_show,
-			   inode->i_private);
-}
-
-static const struct file_operations identity_resolving_keys_fops = {
-	.open		= identity_resolving_keys_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(identity_resolving_keys);
 
 static int long_term_keys_show(struct seq_file *f, void *ptr)
 {
@@ -898,17 +749,7 @@ static int long_term_keys_show(struct seq_file *f, void *ptr)
 	return 0;
 }
 
-static int long_term_keys_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, long_term_keys_show, inode->i_private);
-}
-
-static const struct file_operations long_term_keys_fops = {
-	.open		= long_term_keys_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(long_term_keys);
 
 static int conn_min_interval_set(void *data, u64 val)
 {

net/bluetooth/hci_request.c

@@ -919,6 +919,43 @@ static bool adv_use_rpa(struct hci_dev *hdev, uint32_t flags)
 	return true;
 }
 
+static bool is_advertising_allowed(struct hci_dev *hdev, bool connectable)
+{
+	/* If there is no connection we are OK to advertise. */
+	if (hci_conn_num(hdev, LE_LINK) == 0)
+		return true;
+
+	/* Check le_states if there is any connection in slave role. */
+	if (hdev->conn_hash.le_num_slave > 0) {
+		/* Slave connection state and non connectable mode bit 20. */
+		if (!connectable && !(hdev->le_states[2] & 0x10))
+			return false;
+
+		/* Slave connection state and connectable mode bit 38
+		 * and scannable bit 21.
+		 */
+		if (connectable && (!(hdev->le_states[4] & 0x01) ||
+				    !(hdev->le_states[2] & 0x40)))
+			return false;
+	}
+
+	/* Check le_states if there is any connection in master role. */
+	if (hci_conn_num(hdev, LE_LINK) != hdev->conn_hash.le_num_slave) {
+		/* Master connection state and non connectable mode bit 18. */
+		if (!connectable && !(hdev->le_states[2] & 0x02))
+			return false;
+
+		/* Master connection state and connectable mode bit 35 and
+		 * scannable 19.
+		 */
+		if (connectable && (!(hdev->le_states[4] & 0x10) ||
+				    !(hdev->le_states[2] & 0x08)))
+			return false;
+	}
+
+	return true;
+}
+
 void __hci_req_enable_advertising(struct hci_request *req)
 {
 	struct hci_dev *hdev = req->hdev;
@@ -927,7 +964,15 @@ void __hci_req_enable_advertising(struct hci_request *req)
 	bool connectable;
 	u32 flags;
 
-	if (hci_conn_num(hdev, LE_LINK) > 0)
+	flags = get_adv_instance_flags(hdev, hdev->cur_adv_instance);
+
+	/* If the "connectable" instance flag was not set, then choose between
+	 * ADV_IND and ADV_NONCONN_IND based on the global connectable setting.
+	 */
+	connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) ||
+		      mgmt_get_connectable(hdev);
+
+	if (!is_advertising_allowed(hdev, connectable))
 		return;
 
 	if (hci_dev_test_flag(hdev, HCI_LE_ADV))
@@ -940,14 +985,6 @@ void __hci_req_enable_advertising(struct hci_request *req)
 	 */
 	hci_dev_clear_flag(hdev, HCI_LE_ADV);
 
-	flags = get_adv_instance_flags(hdev, hdev->cur_adv_instance);
-
-	/* If the "connectable" instance flag was not set, then choose between
-	 * ADV_IND and ADV_NONCONN_IND based on the global connectable setting.
-	 */
-	connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) ||
-		      mgmt_get_connectable(hdev);
-
 	/* Set require_privacy to true only when non-connectable
 	 * advertising is used. In that case it is fine to use a
 	 * non-resolvable private address.
@@ -1985,13 +2022,6 @@ static void le_scan_restart_work(struct work_struct *work)
 	hci_dev_unlock(hdev);
 }
 
-static void disable_advertising(struct hci_request *req)
-{
-	u8 enable = 0x00;
-
-	hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
-}
-
 static int active_scan(struct hci_request *req, unsigned long opt)
 {
 	uint16_t interval = opt;
@@ -2017,7 +2047,7 @@ static int active_scan(struct hci_request *req, unsigned long opt)
 		cancel_adv_timeout(hdev);
 		hci_dev_unlock(hdev);
 
-		disable_advertising(req);
+		__hci_req_disable_advertising(req);
 	}
 
 	/* If controller is scanning, it means the background scanning is