V4L/DVB (8532): mxl5007t: remove excessive locks

The use of mutex locking is overly paranoid in this driver.
The only locks we need are around the manipulation of the
register arrays. The other locks are not needed - remove them.

Thanks to Steven Toth for pointing this out.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/common/tuners/mxl5007t.c

@@ -663,8 +663,6 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
-	mutex_lock(&state->lock);
-
 	ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
 	if (mxl_fail(ret))
 		goto fail;
@@ -676,8 +674,6 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
 		goto fail;
 	mxl_debug("rf input power: %d", rf_input_level);
 fail:
-	mutex_unlock(&state->lock);
-
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
 
@@ -839,8 +835,6 @@ static int mxl5007t_init(struct dvb_frontend *fe)
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
-	mutex_lock(&state->lock);
-
 	ret = mxl5007t_read_reg(state, 0x05, &d);
 	if (mxl_fail(ret))
 		goto fail;
@@ -848,8 +842,6 @@ static int mxl5007t_init(struct dvb_frontend *fe)
 	ret = mxl5007t_write_reg(state, 0x05, d | 0x01);
 	mxl_fail(ret);
 fail:
-	mutex_unlock(&state->lock);
-
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
 
@@ -865,8 +857,6 @@ static int mxl5007t_sleep(struct dvb_frontend *fe)
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 
-	mutex_lock(&state->lock);
-
 	ret = mxl5007t_read_reg(state, 0x05, &d);
 	if (mxl_fail(ret))
 		goto fail;
@@ -874,8 +864,6 @@ static int mxl5007t_sleep(struct dvb_frontend *fe)
 	ret = mxl5007t_write_reg(state, 0x05, d & ~0x01);
 	mxl_fail(ret);
 fail:
-	mutex_unlock(&state->lock);
-
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
 
@@ -1001,12 +989,8 @@ struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
 
-		mutex_lock(&state->lock);
-
 		ret = mxl5007t_get_chip_id(state);
 
-		mutex_unlock(&state->lock);
-
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 0);